ARROWMAX SGS PRO Electric Engraving and Polishing Pen User Manual

1. Introduction

1.1 Product Overview

The ARROWMAX SGS PRO Smart Mini Electric Engraving and Polishing Pen is a versatile tool designed for precision work on various materials. It functions as an engraving pen, carving pen, and a wireless rotary tool, utilizing a diamond-tipped engraving head for intricate designs.

This tool is suitable for a wide range of crafting and design projects, including miniatures, jewelry, prototypes, sculptures, and complex art pieces. It can be used on materials such as plastic, wood, stone, steel, aluminum, gold, glass, ceramic, and even crystals or minerals like jade.

Key features include intelligent motion control that adjusts speed based on the angle of twist, an OLED display for status, Bluetooth connectivity for app customization, and convenient magnetic wireless charging.

Figure 1.1: ARROWMAX SGS PRO Electric Engraving and Polishing Pen with its storage case and included bits.

1.2 Package Contents

The SGS PRO package includes the following items:

• ARROWMAX SGS PRO Smart Mini Electric Engraving and Polishing Pen
• Magnetic Charging Base
• USB Charging Cable
• 30 Engraving Bits
• 12 Polishing Bits
• Storage Case for the pen and bits

Figure 1.2: All items included in the SGS PRO product package.

2. Safety Information

Please read and understand all safety warnings and instructions before operating the device. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Keep Work Area Clean and Well Lit: Cluttered or dark areas invite accidents.
• Avoid Dangerous Environments: Do not use power tools in damp or wet locations, or where flammable liquids or gases are present.
• Stay Alert: Watch what you are doing and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication.
• Use Personal Protective Equipment: Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Secure Workpiece: Always clamp or otherwise secure the workpiece to a stable platform. Holding the workpiece by hand or against your body is unstable and may lead to loss of control.
• Do Not Overreach: Keep proper footing and balance at all times.
• Disconnect Power: Always disconnect the tool from the power source before making any adjustments, changing accessories, or storing the tool.
• Store Idle Tools: When not in use, tools should be stored in a dry, high, or locked-up place, out of reach of children.
• Maintain Tools with Care: Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.
• Check for Damaged Parts: Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function.

3. Setup

3.1 Charging the Device

The SGS PRO features a 4V rechargeable battery and supports magnetic wireless charging. A full charge provides approximately 90 minutes of operation time.

1. Place the SGS PRO pen onto the magnetic charging base. Ensure the pen is correctly aligned for the magnetic connection.
2. Connect the USB charging cable to the charging base and then to a compatible USB power source (e.g., computer USB port, USB wall adapter).
3. The OLED display on the pen will indicate the charging status.
4. Once fully charged, disconnect the charging cable and remove the pen from the base.

Figure 3.1: Key components of the SGS PRO pen, including the magnetic charging port.

3.2 Attaching and Changing Bits

The SGS PRO comes with 30 engraving bits and 12 polishing bits, designed for various applications. The chuck allows for easy bit changes without requiring additional tools.

Figure 3.2: The complete set of 30 engraving and 12 polishing bits.

1. Ensure the device is turned off before changing any bits.
2. Gently pull out the currently installed bit from the chuck.
3. Select the desired engraving or polishing bit.
4. Insert the new bit firmly into the chuck until it is securely seated.
5. Verify the bit is properly installed and stable before turning on the device.

4. Operating Instructions

4.1 Power On/Off

To power on the SGS PRO, press and hold the Power Button located on the pen. The OLED display will illuminate, showing battery status, selected mode, and rotation direction. To power off, press and hold the Power Button again.

4.2 Speed Control and Intelligent Motion System

The SGS PRO features an intelligent motion system that automatically adjusts the tool's speed based on the angle of the twist, ensuring precise and consistent engraving and polishing results. The OLED display provides real-time feedback on the current speed and mode.

The device offers multiple preset speed modes. You can cycle through these modes by short-pressing the Power Button (or a dedicated mode button if present, refer to the OLED display for indicators).

4.3 App Customization (Optional)

For advanced customization, the ARROWMAX SGS PRO can be connected to the Arrowmax smartphone application, available for both Android and iOS devices. This app allows users to precisely customize the speed in increments of 500 RPM and control the forward/reverse direction for each mode.

1. Download the "Arrowmax" app from the Google Play Store (for Android) or the Apple App Store (for iOS).
2. Ensure Bluetooth is enabled on your smartphone.
3. Open the Arrowmax app and follow the on-screen instructions to pair with your SGS PRO device.
4. Once connected, use the app interface to adjust speed settings and rotation direction as desired.

Figure 4.1: The ARROWMAX smartphone application for advanced control.

4.4 Application Examples

The SGS PRO is designed for a variety of light craft and design tasks. Here are some common applications:

• Engraving: Create precise and intricate designs on materials like wood, glass, metal (gold, aluminum, steel), stone, and ceramics.
• Polishing: Smooth and shine surfaces, particularly useful for jewelry and small models.
• Carving: Detail work on softer materials such as wood or plastic.
• Model Making: Refine and customize miniature models and prototypes.

Figure 4.2: Customizing various items with the SGS PRO.

Figure 4.3: Various features and uses of the SGS PRO.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your ARROWMAX SGS PRO.

• Cleaning: After each use, wipe down the pen body with a soft, dry cloth to remove any dust or debris. Do not use harsh chemicals or abrasive cleaners.
• Bit Care: Clean engraving and polishing bits after use. Store them in the provided case to prevent damage and loss. Replace worn or dull bits to maintain precision and prevent damage to your workpiece.
• Storage: When not in use, store the SGS PRO and its accessories in the original case in a dry, cool place, away from direct sunlight and moisture.
• Battery Care: For long-term storage, ensure the battery is partially charged (around 50%). Avoid fully discharging the battery for extended periods.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact ARROWMAX customer service directly. Information regarding spare parts availability is not explicitly provided.

For further assistance, visit the official ARROWMAX website or contact their support team through the contact details provided in your product packaging.