RASTAR 6930751321175

RASTAR 1/16 Scale Dodge Charger R/T RC Car Instruction Manual

Introduction

Thank you for purchasing the RASTAR 1/16 Scale Dodge Charger R/T Remote Control Car. This product is an officially licensed replica designed for enthusiasts aged 8 and up. This manual provides essential information for the safe and proper operation, setup, and maintenance of your RC car. Please read it thoroughly before use and retain it for future reference.

RASTAR 1/16 Scale Dodge Charger R/T RC Car, front-left view

Image: Front-left view of the RASTAR 1/16 Scale Dodge Charger R/T RC Car, showcasing its detailed design.

Package Contents

Please check the package to ensure all items are present:

  • 1 x RASTAR 1/16 Scale Dodge Charger R/T RC Car
  • 1 x Dual-Grip Remote Controller
  • 1 x User Guide

Safety Information

  • This product is suitable for users aged 8 years and older. Adult supervision is recommended.
  • Do not operate the RC car near people, pets, or obstacles.
  • Avoid operating in wet conditions or on public roads.
  • Do not touch the wheels or moving parts during operation.
  • Always remove batteries from the car and remote controller when not in use for extended periods.
  • Use only the specified battery types (AA batteries). Do not mix old and new batteries or different types of batteries.
  • Non-rechargeable batteries are not to be recharged. Rechargeable batteries should only be charged under adult supervision.

Setup

Battery Installation

Before operating your RC car, batteries must be installed in both the car and the remote controller.

RASTAR 1/16 Scale Dodge Charger R/T RC Car with hood and door open, and remote controller

Image: The RASTAR RC car with its hood and driver's side door open, alongside the dual-grip remote controller, illustrating the components for battery installation.

1. Car Battery Installation (5 x AA batteries, not included)

  1. Locate the battery compartment on the underside of the RC car.
  2. Use a screwdriver to open the battery compartment cover.
  3. Insert 5 new AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Replace the battery compartment cover and secure it with the screw.

2. Remote Controller Battery Installation (2 x AA batteries, not included)

  1. Locate the battery compartment on the back of the remote controller.
  2. Use a screwdriver to open the battery compartment cover.
  3. Insert 2 new AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Replace the battery compartment cover and secure it with the screw.

Operating Instructions

Pairing the Car and Remote

The RASTAR RC car operates on a 2.4Ghz frequency, which allows for automatic pairing and reduces interference. Follow these steps:

  1. Ensure batteries are correctly installed in both the car and the remote controller.
  2. Turn on the RC car using the power switch located on its underside.
  3. Turn on the remote controller using its power switch.
  4. The remote controller and car should automatically pair. If the car does not respond, turn both devices off and then on again.

Controls

The dual-grip remote controller provides intuitive control over the RC car:

  • Forward/Reverse: Use the trigger on the remote to move the car forward or backward.
  • Left/Right: Use the steering wheel on the remote to turn the car left or right.
  • Stop: Release the trigger to bring the car to a stop.

Driving Tips

  • Operate the car on flat, dry surfaces for optimal performance.
  • The car features working headlights and taillights, which activate during operation.
  • Doors can be opened manually for display purposes.
  • The car has an independent suspension system and differential mechanism for improved handling.

Maintenance

Cleaning

  • Wipe the car and remote controller with a soft, dry cloth after each use.
  • Do not use water or chemical cleaners, as this may damage the electronic components.
  • Remove any debris from the wheels and chassis to ensure smooth operation.

Storage

  • Store the RC car and remote controller in a cool, dry place away from direct sunlight.
  • Always remove batteries from both devices before storing for extended periods to prevent leakage and damage.

Troubleshooting

ProblemPossible CauseSolution
Car does not respond to remote.Low batteries in car or remote; Car/remote not turned on; Not paired correctly; Out of range.Replace batteries; Ensure both are switched ON; Turn both off and on again to re-pair; Operate within 98 ft range.
Short operating range.Low batteries; Environmental interference.Replace batteries; Move to an area with less electronic interference.
Car moves slowly or inconsistently.Low car batteries; Debris in wheels.Replace car batteries; Clean wheels and axles.

Specifications

  • Model Number: 6930751321175
  • Scale: 1/16
  • Product Dimensions: 13 x 5 x 3.5 inches (approximately)
  • Item Weight: 1.54 pounds
  • Frequency: 2.4Ghz
  • Remote Range: Up to 98 feet (30 meters)
  • Speed: Approximately 5.1 mph (8.2 km/h)
  • Car Batteries: 5 x AA (not included)
  • Remote Controller Batteries: 2 x AA (not included)
  • Material: ABS Plastic
  • Recommended Age: 8 years and up

Warranty and Support

RASTAR products are manufactured with quality in mind. For any questions, technical support, or warranty inquiries, please refer to the contact information provided on the product packaging or visit the official RASTAR website. Please retain your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.