1. Introduction
Thank you for choosing the DEWENWILS Outdoor Wall Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new light fixture. Please read these instructions thoroughly before installation and retain them for future reference.
This 2-pack outdoor wall light fixture features a matte black finish with an elegant gold interior, designed to offer a blend of vintage charm and modern aesthetics. It is weatherproof and anti-corrosion, suitable for various outdoor environments.
Image: DEWENWILS Outdoor Wall Light Fixture, showing two black gooseneck barn lights with gold interiors, illuminated, mounted on a wall.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in electric shock or fire.
- Always turn off the main power supply before beginning any electrical work.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all wiring connections are secure and comply with local electrical codes.
- Do not exceed the maximum wattage specified for the bulb (60W max).
- This fixture is designed for 120V AC power supply.
- Do not install on surfaces that are not structurally sound.
- Keep flammable materials away from the light fixture when in operation.
3. Package Contents
Please verify that all components are present and undamaged before proceeding with installation.
Image: Diagram showing the components included for installation: a gooseneck barn light assembly, 3 wire connectors, 2 outlet box screws, and 1 mounting bracket. A light bulb is shown as 'NOT Included'.
- Outdoor Wall Light Fixture (2 units)
- Wire Connectors (3 per fixture)
- Outlet Box Screws (2 per fixture)
- Mounting Bracket (1 per fixture)
- Instruction Manual
Note: E26 base bulbs are not included and must be purchased separately.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | HOWL02D |
| Brand | Dewenwils |
| Voltage | 120 Volts |
| Bulb Base | E26 |
| Max Wattage | 60 Watts (Bulb not included) |
| Material | Die-cast Iron, Metal |
| Finish | Matte Black exterior, Gold interior |
| Dimensions (L x W x H) | 36.1L x 27.4W x 25.1H Centimetres (approx. 14.2"L x 10.8"W x 9.9"H) |
| Mounting Base Diameter | 5.1 inches |
| Weather Resistance | Water Resistant, Snowproof, Windproof, Sunproof |
| Certifications | ETL Listed |
| Installation Type | Hardwired, Wall Mount |
Image: Dimensions of the DEWENWILS outdoor wall light fixture.
5. Installation Instructions
Before starting, ensure the power is turned off at the circuit breaker. This fixture is designed for hardwired installation.
Tools You May Need (Not Included):
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Electrical Tape
- Ladder (if installing at height)
- Safety Glasses
Step-by-Step Installation:
- Prepare the Fixture: Carefully unpack the light fixture. Remove the lampshade from the gooseneck arm if it's pre-assembled.
Image: Step 1 - Installing the lampshade and bulb.
- Mount the Bracket: Attach the mounting bracket to your wall's electrical outlet box using the provided outlet box screws. Ensure the bracket is securely fastened.
Image: Step 2 - Fixing the mounting bracket on the wall or outlet box, showing screws securing the bracket.
- Connect Wiring: Connect the fixture's wires to your household electrical wires.
- Connect the black wire from the fixture to the black (live) wire from the outlet box.
- Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
- Connect the ground wire from the fixture to the ground wire from the outlet box (usually bare copper or green).
Image: Step 3 - Connecting the wires with terminal caps, showing black, white, and ground wires being connected.
- Install Light Fixture: Carefully push the wired fixture onto the mounting bracket, aligning the holes. Secure the fixture to the mounting bracket using the two black screw nuts provided.
Image: Step 4 - Installing the light fixture, locked with two black screw nuts.
- Install Bulb: Insert an E26 base bulb (not included) into the socket. Do not exceed 60W.
Image: E26 Sockets compatible with various E26 base bulbs (60W max, bulb not included).
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker. Test the light fixture.
6. Operating Instructions
The DEWENWILS Outdoor Wall Light Fixture operates as a standard hardwired light. Once installed and powered, it can be controlled by an external wall switch (not included) connected to your electrical circuit.
- Power On/Off: Use the connected wall switch to turn the light fixture on or off.
- Bulb Type: This fixture uses standard E26 base bulbs. You can use LED, CFL, Halogen, or Incandescent bulbs, provided they do not exceed 60 watts.
- Light Effect: The matte black exterior and gold interior are designed to provide a warm, downward-directed light, enhancing the ambiance of your outdoor space.
Image: Examples of the DEWENWILS outdoor wall light fixture installed in various outdoor settings.
7. Maintenance
Cleaning:
- Always disconnect power before cleaning.
- Wipe the fixture with a soft, damp cloth.
- Do not use abrasive cleaners or solvents, as these may damage the finish.
- Ensure the fixture is completely dry before restoring power.
Bulb Replacement:
- Turn off power to the fixture at the circuit breaker.
- Allow the old bulb to cool completely before touching it.
- Unscrew the old E26 base bulb.
- Screw in a new E26 base bulb, ensuring it does not exceed 60 watts.
- Restore power and test the new bulb.
Image: The DEWENWILS outdoor wall light fixture demonstrating its weather-resistant features.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is ON. |
| Loose wiring connection. | Turn off power, check all wire connections. Re-secure if loose. | |
| Faulty bulb. | Replace bulb with a new, working E26 bulb (max 60W). | |
| Light flickers. | Loose bulb or wiring. | Ensure bulb is screwed in tightly. Turn off power and check wiring connections. |
| Incompatible dimmer switch (if applicable). | Ensure your dimmer switch is compatible with the bulb type used. | |
| Fixture appears corroded or damaged. | Exposure to harsh elements over time. | While designed for outdoor use, extreme conditions can affect appearance. Clean regularly. If severe, consider replacement. |
9. Warranty & Support
This DEWENWILS product comes with a 3-year manufacturer's warranty from the date of purchase, covering defects in materials and workmanship under normal use.
The warranty does not cover damage caused by improper installation, misuse, abuse, accidents, or unauthorized modifications.
For warranty claims, technical support, or any questions regarding your product, please contact DEWENWILS customer service. Refer to your purchase documentation or the DEWENWILS official website for contact details.
Please have your model number (HOWL02D) and proof of purchase ready when contacting support.