1. Introduction
Thank you for choosing Herdio Passive Outdoor Speakers. These 4-inch, 2-way, 400W speakers are designed for both indoor and outdoor use, featuring all-weather durability and a waterproof construction. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.
Image 1.1: Herdio outdoor speakers providing stereo sound on a patio.
2. What's Included
Verify that all components are present in the package:
- 4x Outdoor Speakers
- 4x Mount Brackets
- 4x Speaker Wires (16.4 Feet / 5 meters each)
Image 2.1: Package contents including speakers, brackets, and wires.
3. Key Features
- Full Range Superior Quality Sound: Equipped with a 1-inch dome tweeter and a 4-inch aluminum injection cone woofer for clear highs and deep bass.
- Waterproof Construction & All-Weather Durability: IP44 marine grade waterproof rating, designed to resist various weather conditions including snow, rain, and sun. The cabinet enclosure is made with molded ABS plastic.
- Versatile Swivel Brackets: Easy-install swivel brackets allow up to a 120-degree range of motion, with the front facial rotating up to 90 degrees for optimal sound direction.
- Indoor & Outdoor Design: Suitable for installation in various environments such as patios, poolsides, sunrooms, garages, basements, or on bookshelves.
Image 3.1: Internal components of the speaker, highlighting the tweeter and woofer.
Image 3.2: Speaker demonstrating its waterproof and all-weather resistant coating.
4. Setup and Installation
Follow these steps for proper installation of your Herdio speakers:
- Choose a Location: Select a suitable location for your speakers, considering sound dispersion and proximity to your audio source. The speakers are designed for wall mounting.
- Mounting the Brackets:
- Attach the provided swivel brackets to your desired mounting surface (wall, ceiling, etc.) using appropriate hardware (not included, depending on surface type).
- Ensure the brackets are securely fastened to support the weight of the speakers.
- Attaching the Speakers:
- Slide the speakers onto the mounted brackets.
- Adjust the angle of the speakers using the swivel mechanism for optimal sound projection. The brackets allow for 120-degree rotation, and the speaker face can rotate 90 degrees.
- Wiring the Speakers:
- Connect the included speaker wires to the speaker terminals on the back of each speaker. Ensure correct polarity (positive to positive, negative to negative).
- Run the speaker wires to your amplifier or receiver. These are passive speakers and require an external amplifier.
Image 4.1: Speed-lock mounting system and adjustable bracket.
Image 4.2: Speaker rear view with terminals and adjustable bracket.
5. Operating Instructions
Once installed and wired, operating your Herdio speakers is straightforward:
- Connect to Audio Source: Ensure your amplifier or receiver is connected to your desired audio source (e.g., desktop, laptop, MP3 player, smartphone, tablet, television).
- Power On: Turn on your amplifier/receiver.
- Adjust Volume: Start with a low volume level on your amplifier/receiver and gradually increase it to your preferred listening level.
- Sound Optimization: Adjust the speaker angles using the swivel brackets to direct sound where desired for the best listening experience.
These speakers are passive and do not have their own power or volume controls. All audio adjustments are made via your connected amplifier or audio source.
6. Maintenance
To ensure the longevity and optimal performance of your Herdio outdoor speakers, follow these maintenance guidelines:
- Cleaning: Wipe the speaker enclosures with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish and waterproof coating.
- Weather Protection: While the speakers are waterproof (IP44 marine grade) and designed for all-weather durability, prolonged exposure to extreme conditions (e.g., direct heavy rain, snow, or intense sunlight) can still affect their lifespan. Consider covering them or bringing them indoors during severe weather events if possible.
- Grille Inspection: Periodically check the speaker grilles for any debris or blockages that might affect sound quality. Clean gently if necessary.
- Wiring Check: Occasionally inspect the speaker wire connections for any signs of corrosion or loose connections, especially in outdoor environments.
Image 6.1: Speaker enduring rain, highlighting its weather resistance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers |
|
|
| Distorted or unclear sound |
|
|
| Sound only from one speaker |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | HOS-SZJW-401Bx2-US |
| Speaker Type | 2-Way (Tweeter, Woofer) |
| Woofer Diameter | 4 Inches |
| Tweeter Diameter | 1 Inch |
| Speaker Maximum Output Power | 400 Watts (Peak) |
| Impedance | 4 Ohms |
| Frequency Response | 70Hz - 20 KHz |
| Connectivity Technology | Wired |
| Mounting Type | Wall Mount |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Water Resistance Level | Waterproof (IP44 Marine Grade) |
| Product Dimensions (LxWxH) | 8.62"D x 5.67"W x 6.62"H (21.9cm x 14.4cm x 15.9cm) |
| Item Weight | 12.62 pounds (approx. 5.74 kg) for the set of 4 speakers |
| Color | Black |
| Included Components | 4x outdoor Speakers, 4 Mount Brackets, 4 speaker wires |
Image 8.1: Speaker dimensions and key technical specifications.
9. Warranty and Support
Warranty: Herdio provides a one-year limited warranty for these speakers. This warranty covers manufacturing defects under normal use.
Support: For any questions, technical assistance, or warranty claims, please contact Herdio customer service. You can typically find contact information on the Herdio official website or through your purchase platform. Herdio aims to provide support within 24 hours.
Please retain your proof of purchase for warranty service.
