MERITLINE Bunk Bed with Stairs
Contents
MERITLINE Twin Over Full House Bunk Bed with Stairs and Chalkboard User Manual
Model: Bunk Bed with Stairs
1. Introduction
Thank you for choosing the MERITLINE Twin Over Full House Bunk Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read all instructions carefully before assembly and retain this manual for future reference.

Image 1.1: The MERITLINE Twin Over Full House Bunk Bed in Grey, featuring a roof, window, chalkboard, and integrated storage stairs. The upper bed is twin size, and the lower bed is full size.
2. Important Safety Information
WARNING: Failure to follow these warnings could result in serious injury.
- Always follow the manufacturer’s recommendations for mattress size and thickness.
- Ensure all connections are tight before use. Periodically check and tighten as necessary.
- Do not allow children under 6 years of age on the upper bunk.
- Prohibit more than one person on the upper bunk.
- Prohibit horseplay on or under the bed.
- Always use the provided stairs for entering and exiting the upper bunk.
- Do not use substitute parts. Contact MERITLINE for replacement parts.
- Keep these instructions for future reference.
- This product is designed for indoor use only.
3. Package Contents
Your MERITLINE Twin Over Full House Bunk Bed will be shipped in two separate packages. Please ensure all parts are present and undamaged before beginning assembly. Refer to the detailed parts list included in your packaging for specific component identification.
Note: Mattresses are not included.
4. Assembly Instructions
Assembly requires two adults. Please follow the steps below carefully. Tools for assembly are included in the package.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list.
- Assemble the Lower Bed Frame: Begin by assembling the full-size lower bed frame. Connect the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
- Install Lower Bed Slats: Place the wooden slats across the lower bed frame and secure them according to the instructions. These slats provide support for the mattress.
- Assemble the Upper Bed Frame: Construct the twin-size upper bed frame, including the side rails and end panels. Attach the roof structure components to form the house shape.
- Attach Upper Bed Slats and Guardrails: Secure the wooden slats for the upper bunk. Install the full-length panel guardrails around the upper bed for safety.
- Assemble the Storage Staircase: Construct the three-layer storage staircase. Ensure the steps are securely attached and the storage compartments function correctly.
- Attach Staircase to Bunk Bed: Securely attach the assembled storage staircase to the main bunk bed structure.
- Install Chalkboard: Mount the chalkboard panel to the front of the upper bunk as indicated in the instructions.
- Final Inspection: Once assembly is complete, double-check all bolts, screws, and connections to ensure they are tight and secure.

Image 4.1: Partial view of the MERITLINE House Bunk Bed frame during assembly, illustrating the upper bunk structure and the initial roof outline.

Image 4.2: The MERITLINE House Bunk Bed frame with the upper bunk slats installed and guardrails in place, prepared for mattress placement.

Image 4.3: A detailed view of the integrated storage staircase, highlighting the steps and the accessible storage compartments underneath.

Image 4.4: A close-up of the chalkboard panel, which is integrated into the front of the upper bunk, providing a creative space.
2-in-1 Design Feature: This bunk bed can also be separated into a twin loft bed and a standalone full platform bed. To convert, carefully disassemble the connecting components and reconfigure the frames as two independent beds. Refer to the specific instructions in your package for detailed conversion steps.

Image 4.5: This illustration demonstrates the versatility of the bunk bed, showing it both as a combined unit and separated into a twin loft bed and a full platform bed.
5. Operating Instructions
- Using the Bunk Beds: The upper bunk is designed for a twin-size mattress, and the lower bunk for a full-size mattress. Ensure mattresses meet the recommended thickness (6" for upper, 8-10" for lower).
- Chalkboard Functionality: The integrated chalkboard allows for creative expression. Use standard chalk only. Avoid permanent markers or abrasive cleaners.
- Storage Staircase: The three-layer staircase provides convenient storage. The two open shelves underneath offer additional space for books or small items.
6. Maintenance and Care
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Hardware Check: Periodically inspect all bolts, screws, and connections. Tighten any loose hardware to maintain stability and safety.
- Chalkboard Care: Clean the chalkboard with a damp cloth. For stubborn marks, a mild soap solution can be used, followed by wiping with a clean, damp cloth.
7. Troubleshooting
- Bed feels wobbly: Check all assembly hardware. Ensure all bolts and screws are fully tightened.
- Parts missing or damaged: Do not proceed with assembly. Contact MERITLINE customer support immediately for replacement parts.
- Difficulty assembling: Review the assembly instructions carefully. Ensure parts are oriented correctly. If issues persist, contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Overall Dimensions | 93.5"L x 77.7"W x 83.7"H |
| Upper Bed Size | Twin |
| Lower Bed Size | Full |
| Upper Bed Weight Capacity | 250 lbs |
| Lower Bed Weight Capacity | 400 lbs |
| Recommended Upper Mattress Thickness | 6 inches |
| Recommended Lower Mattress Thickness | 8-10 inches |
| Material | Pine Wood and MDF |
| Color | Grey |
| Assembly Required | Yes |

Image 8.1: A comprehensive diagram illustrating the dimensions of the MERITLINE Twin Over Full House Bunk Bed, including measurements for the overall structure, individual bunks, and staircase.
9. Warranty and Support
For warranty information, replacement parts, or customer support, please refer to the documentation included with your purchase or visit the official MERITLINE website. Please have your model number (Bunk Bed with Stairs) and purchase date available when contacting support.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.