1. Introduction
Thank you for choosing the GROOVYPETS GPS Wireless Dog Fence System F800. This system is designed to provide a safe and effective containment solution for your dog using advanced GPS technology. Please read this manual thoroughly before using the product to ensure proper operation and the safety of your pet.

Image: The GROOVYPETS GPS Wireless Dog Fence System F800 product box, showing the brand logo, product name, and model number.
2. Package Contents
Please check the package to ensure all items are present:
- 1 x Rechargeable GPS Wireless Dog Fence Collar Receiver with TPU Collar Strap
- 1 x Magnetic Charging Cable
- 1 x Shock Test Light
- 2 Pairs of Metal Contact Points (Short and Long) with Silicone Caps
- 10 x Border-Marking Flags
- 1 x User’s Manual (English)
3. Safety Information and Important Warnings
- Not for Aggressive Dogs: Do not use this product on aggressive dogs. If your dog is aggressive, consult a professional trainer.
- Supervision: Always supervise your dog, especially during initial training and when using the system in new environments.
- Collar Fit: Ensure the collar fits properly. It should be snug enough for the contact points to touch the skin, but not so tight as to cause discomfort or skin irritation.
- Skin Irritation: Avoid leaving the collar on your dog for more than 12 hours per day. Regularly check your dog's neck for signs of irritation, redness, or sores. If irritation occurs, discontinue use and consult a veterinarian.
- Not a Leash: This collar is not designed to be used with a leash. Attach a separate collar for leash walking.
- Children: Keep all components out of reach of children.
- GPS Accuracy: GPS accuracy can be affected by environmental factors such as dense tree cover, tall buildings, and severe weather.
4. Product Features
- GPS-Based Wireless Boundary: Establishes a circular containment area from a minimum of 33 yards (30 meters) to a maximum of 999 yards (913 meters) radius.
- Dual Operating Modes:
- Automatic Mode: Progressive correction (beep, vibration, static shock) as the dog approaches the boundary.
- Fixed Mode: Allows manual selection of correction levels (1-6) for vibration and static shock.
- Rechargeable & Waterproof: The collar is fully waterproof (IPX7 rated) and features a long-lasting rechargeable battery (up to 36 hours of use).
- Progressive Correction: Delivers a warning beep, followed by vibration, and then static shock if the dog continues towards or crosses the boundary.
- Protection Mode: Prevents over-correction if the dog remains outside the designated fence area.
- Automatic Memory Recall: The system automatically remembers the last set center point and safety radius when powered on in the same location.
- Adjustable Collar Strap: High-quality TPU strap, adjustable from 8 to 24 inches (20-61 cm).
- Suitable for Medium to Large Dogs: Recommended for dogs weighing 20 lbs (10 kg) and up.

Image: Close-up of the GROOVYPETS GPS dog fence collar display, illustrating the three training modes (Beep, Vibration, Shock) and how to adjust correction levels from low to strong.

Image: Diagram illustrating the Automatic Memory feature of the GPS collar. It shows how the collar remembers the set safe radius (e.g., 300 yards) and automatically recalls it when turned on in the same location, or allows for easy resetting if the location changes.

Image: A split image showing the durable TPU collar strap and its comfortable design on one side, and the IPX7 waterproof rating with a dog in the rain on the other. It also indicates that the product is suitable for medium and large breed dogs.
5. Setup Guide
5.1 Charging the Collar
- Connect the magnetic charging cable to the charging port on the collar.
- Plug the USB end of the cable into a standard USB power adapter (not included) or a computer USB port.
- The battery indicator on the LCD screen will show charging status. Charge the collar fully before first use (approximately 2-3 hours).
5.2 Attaching Contact Points
Select the appropriate length of metal contact points based on your dog's coat length:
- Short Contact Points: For dogs with short coats.
- Long Contact Points: For dogs with thick or long coats.
Screw the chosen contact points firmly into the designated holes on the collar receiver. Place silicone caps over the contact points if desired for added comfort, ensuring they still make contact with the dog's skin.
5.3 Fitting the Collar
- Place the collar around your dog's neck so that the receiver is positioned under the chin or on the side of the neck.
- Adjust the strap to ensure a snug fit. You should be able to fit one or two fingers comfortably between the collar and your dog's neck.
- The contact points must make consistent contact with your dog's skin for the system to function effectively.
5.4 Setting Up the GPS Fence Boundary
The system uses GPS to define your dog's safe area. Perform this setup in an open outdoor area with a clear view of the sky for optimal GPS signal reception.
- Power On: Press and hold the power button (usually the 'M' button or a dedicated power button) until the LCD screen illuminates.
- Acquire GPS Signal: Wait for the collar to acquire a GPS signal. The GPS icon on the screen will stop blinking and become solid when a signal is established. This may take a few minutes.
- Set Center Point: Once GPS is acquired, place the collar at the desired center of your containment area. This location will be the reference point for the circular fence.
- Adjust Radius: Use the Up/Down buttons (usually arrow buttons) to adjust the radius of the fence. The range is typically from 33 yards (30m) to 999 yards (913m). Select a radius appropriate for your property and dog.
- Confirm Setting: The system will automatically save the setting after a few seconds of inactivity or by pressing a confirmation button if available.

Image: A dog wearing the GROOVYPETS GPS collar running in a grassy field, with a satellite icon and a blue cone indicating GPS signal reception, and a dashed white line showing the circular boundary.
5.5 Using Border-Marking Flags
Use the included border-marking flags to visually define the boundary for your dog. Place them at regular intervals around the perimeter of your set fence area. These flags are crucial for initial training.
Video: An official product video demonstrating the GROOVYPETS GPS Dog Fence System Model F800, including setup and features. This video provides a visual guide to understanding the system's operation.
6. Operating Instructions
6.1 Powering On/Off
- To Power On: Press and hold the 'M' (Mode) button for 2-3 seconds until the LCD screen lights up.
- To Power Off: Press and hold the 'M' (Mode) button for 2-3 seconds until the LCD screen turns off.
6.2 Switching Between Automatic Mode and Fixed Mode
Press the 'M' (Mode) button briefly to toggle between Automatic Mode and Fixed Mode. The display will indicate the current mode.
- Automatic Mode: The collar automatically delivers progressive corrections (beep, vibration, shock) as your dog approaches the boundary. The intensity increases as the dog gets closer to or crosses the boundary.
- Fixed Mode: Allows you to manually set the intensity level for vibration and static shock.
6.3 Adjusting Correction Levels (Fixed Mode Only)
In Fixed Mode, use the Up/Down arrow buttons to select the desired correction level (1-6) for vibration and static shock. Level 1 is the lowest intensity, and Level 6 is the highest. Start with the lowest effective level and increase only if necessary.
6.4 Understanding Display Indicators
- GPS Signal Icon: Blinking indicates searching for signal; solid indicates signal acquired.
- Battery Indicator: Shows remaining battery life. Recharge when low.
- Distance/Radius Display: Shows the set radius of the fence.
- Mode Indicator: Shows whether the collar is in Automatic or Fixed mode.
- Correction Level: Displays the selected level in Fixed Mode.
7. Training Your Dog
Effective training is crucial for your dog to understand and respect the wireless fence boundary. This system is a training aid, not a substitute for proper training.
- Introduction: Allow your dog to wear the collar for a few days without activation to get accustomed to it.
- Boundary Awareness: Walk your dog on a leash around the perimeter marked by the flags. When the collar emits a warning beep, gently guide your dog back into the safe zone. Praise and reward them for returning.
- Correction Introduction: If your dog ignores the beep and approaches the boundary, they will receive a vibration or static shock. Immediately guide them back into the safe zone and offer praise. Never punish your dog for receiving a correction; instead, reinforce the desired behavior of staying within the boundary.
- Short Training Sessions: Keep training sessions short (10-15 minutes) and positive. Repeat several times a day.
- Supervision: Do not leave your dog unsupervised with the system until you are confident they understand the boundaries.
- Consistency: Consistency is key. Ensure all family members follow the same training protocols.
8. Maintenance
- Cleaning: Clean the collar and contact points regularly with a damp cloth. Ensure the charging port is dry before charging.
- Battery Care: Recharge the collar when the battery indicator is low. Avoid fully depleting the battery frequently to prolong its lifespan. If storing for a long period, charge it periodically.
- Contact Point Inspection: Periodically check the contact points for wear or damage. Replace if necessary. Ensure they are clean and free of debris.
- Strap Inspection: Check the collar strap for signs of wear and tear. Replace if it becomes damaged.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not turning on. | Low battery; Power button not pressed long enough. | Charge the collar fully. Press and hold the 'M' button for 2-3 seconds. |
| Inconsistent boundary or false corrections. | Poor GPS signal; Environmental interference (dense trees, tall buildings); Collar movement on dog's neck. | Ensure clear sky view for GPS. Avoid areas with heavy interference. Re-fit collar snugly. Re-establish center point if location changed significantly. |
| Collar not correcting. | Contact points not touching skin; Low battery; Incorrect mode/level setting. | Adjust collar fit or use longer contact points. Charge battery. Check mode and correction level settings. |
| Poor GPS signal acquisition. | Obstructed view of sky; Initial acquisition time. | Move to an open area. Allow several minutes for initial GPS lock. |
10. Specifications
| Model | F800 |
| Brand | GROOVYPETS |
| Product Dimensions | 15.75 x 0.79 x 0.04 inches (Collar); 15.2 ounces (Total Package) |
| Battery Type | 1 Lithium Ion battery (included) |
| Collar Strap Adjustment | 8 - 24 inches (20 - 61 cm) |
| Waterproof Rating | IPX7 |
| GPS Fence Radius Range | 33 - 999 yards (30 - 913 meters) |
| Suitable Dog Weight | 20 lbs (10 kg) and up |
| Materials | Metal, Thermoplastic Polyurethane (TPU) |
11. Warranty and Support
11.1 Warranty Information
This GROOVYPETS product comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects. It does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
11.2 Customer Support
For any questions, concerns, or technical assistance regarding your GROOVYPETS GPS Wireless Dog Fence System F800, please contact our customer support team. Refer to the product packaging or the retailer's website for specific contact details.