Kichler Pallas 4-Light Mini Chandelier (Model 52520BNB) User Manual

1. Introduction

The Kichler Pallas 4-Light Mini Chandelier (Model 52520BNB) is a ceiling-mounted lighting fixture designed for indoor use. This fixture features a Brushed Natural Brass finish and accommodates four light sources. Optional linen tapered shades can be installed to enhance its appearance. This manual provides essential instructions for the safe installation, proper operation, and routine maintenance of your new chandelier.

Figure 1: Kichler Pallas 4-Light Mini Chandelier with optional linen tapered shades.

2. Safety Information

WARNING: Risk of Electric Shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.

• Always turn off electrical power at the main circuit breaker before beginning any installation, cleaning, or maintenance procedures.
• Consult a qualified electrician if you are unsure about wiring procedures or have any electrical questions.
• Use only the specified bulb type and wattage as indicated in the specifications section. Do not exceed the maximum wattage.
• Ensure all electrical connections are secure and properly insulated to prevent electrical hazards.
• This fixture is designed for indoor use only. Do not install in wet or damp locations.
• Handle glass components and bulbs with care to prevent breakage.

3. Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, contact Kichler customer support before proceeding with installation.

• Chandelier Fixture Body (1)
• Mounting Plate (1)
• Canopy (1)
• Downrods/Stems (various lengths for adjustable height)
• Mounting Screws and Wire Nuts (set)
• Optional Linen Tapered Shades (4)
• Instruction Manual (1)

4. Setup and Installation

Follow these steps carefully to install your Kichler Pallas Mini Chandelier. It is recommended to have a second person assist during installation.

4.1. Preparation

1. Turn off Power: Locate the main circuit breaker for the room where the fixture will be installed and turn off the power.
2. Inspect Components: Carefully unpack all parts and inspect them for any damage. Ensure all items listed in the 'Package Contents' section are present.
3. Gather Tools: You may need a screwdriver, wire strippers, electrical tape, and a ladder (not included).

4.2. Mounting Plate Installation

Attach the mounting plate to the ceiling junction box.

Figure 2: Detail of the fixture's canopy and downrod connection point.

1. Secure the mounting plate to the ceiling junction box using the screws provided. Ensure it is firmly attached and level.

4.3. Adjusting Fixture Height and Assembling Downrods

1. Determine the desired hanging height for your chandelier.
2. Thread the fixture wires through the chosen downrods and then connect the downrods to the fixture body and the canopy. Ensure all connections are tight.

4.4. Wiring Connections

Make electrical connections inside the junction box.

1. Connect the fixture's ground wire (bare copper or green) to the house ground wire using a wire nut.
2. Connect the fixture's neutral wire (white) to the house neutral wire (white) using a wire nut.
3. Connect the fixture's hot wire (black) to the house hot wire (black) using a wire nut.
4. After securing connections with wire nuts, wrap each connection with electrical tape for added insulation and security.
5. Carefully tuck all wires into the ceiling junction box.

4.5. Canopy Installation

1. Carefully raise the canopy to the ceiling, aligning the mounting screws on the mounting plate with the holes in the canopy.
2. Secure the canopy in place using the decorative nuts or screws provided.

4.6. Shade and Bulb Installation

Figure 3: Chandelier without shades, illustrating bulb socket type.

1. Shade Installation (Optional): If using the optional linen tapered shades, carefully place each shade over the bulb socket and secure it according to the fixture's design (e.g., with a socket ring or by resting on a holder).
2. Bulb Installation: Install four incandescent bulbs with a G13 base. Ensure the wattage does not exceed 100 watts per bulb. Screw bulbs in gently to avoid overtightening.

4.7. Restore Power

1. Once installation is complete, turn the electrical power back on at the main circuit breaker.
2. Test the fixture to ensure it operates correctly.

5. Operating Instructions

The Kichler Pallas 4-Light Mini Chandelier is designed for simple operation via a standard wall switch. Ensure the fixture is properly installed and wired before attempting to operate it.

• To turn the chandelier ON, flip the wall switch connected to the fixture's electrical circuit to the 'ON' position.
• To turn the chandelier OFF, flip the wall switch to the 'OFF' position.

6. Maintenance

Regular maintenance will help preserve the appearance and functionality of your chandelier.

6.1. Cleaning

• Always ensure the power to the fixture is turned off at the circuit breaker before cleaning.
• Wipe the fixture's metal surfaces with a soft, dry cloth.
• For optional linen shades, gently dust with a soft brush or vacuum with a brush attachment.
• Do not use abrasive cleaners, polishes, or solvents, as these can damage the finish and materials.

6.2. Bulb Replacement

• Turn off the power to the fixture at the circuit breaker and allow bulbs to cool completely before attempting replacement.
• Carefully unscrew the old bulb and screw in a new G13 base incandescent bulb.
• Ensure the new bulb does not exceed the maximum wattage of 100 watts.

7. Troubleshooting

If you encounter issues with your chandelier, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Kichler customer support or a qualified electrician.

8. Specifications

9. Warranty Information

The Kichler Pallas 4-Light Mini Chandelier (Model 52520BNB) is backed by a 1-year manufacturer's warranty from the original date of purchase. This warranty covers defects in materials and workmanship under normal use and service.

This warranty does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized repairs. For warranty claims or detailed terms and conditions, please contact Kichler customer support.

10. Customer Support

For technical assistance, replacement parts, or warranty inquiries regarding your Kichler Pallas Mini Chandelier, please contact Kichler customer support through their official channels. You can also visit the official Kichler website for additional product information and resources.

For more information about Kichler products, you may visit the Kichler Store on Amazon:

Visit the Kichler Store on Amazon