1. Introduction
This manual provides instructions for the SZHKHXD replacement remote control, model YAN1F1. It is designed for use with various AC Air Conditioner models, including GREE GWH18QD-K3DNA5G, GWH18QD-K3DNA6G, Alpicair YAN1F1, AWI-21HPDC1D, and Sharp AY-X36RU. Please read this manual carefully before using the remote control to ensure proper operation and to understand its features.
Important Note: As a replacement item, this remote control may not support all functions of your original air conditioner remote. Please refer to the button layout and functions described in this manual.
2. Setup
2.1 Battery Installation
The remote control requires two (2) AAA batteries for operation. No programming or configuration is needed; simply insert the batteries correctly, and the remote will be ready for use.
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards and remove it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery cover by sliding it back into position until it clicks securely.
Figure 1: Back view of the remote control with the battery cover removed, revealing the compartment for two AAA batteries. Important battery safety warnings are visible on the label.
2.2 Initial Use
Once batteries are installed, the remote control is ready to operate your compatible AC unit. Point the remote directly at the air conditioner's receiver when pressing buttons.
3. Operating Instructions
This section describes the primary functions of the buttons on your SZHKHXD remote control.
Figure 2: Front view of the remote control, displaying the button layout and the LCD screen.
- Power Button (Red Circle): Turns the air conditioner ON or OFF.
- MODE: Cycles through operating modes such as Cool, Heat, Fan, Dry, Auto.
- FAN: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- SWING: Controls the louver swing function for air distribution.
- TURBO: Activates rapid cooling or heating for a short period.
- SLEEP: Engages sleep mode, which adjusts temperature and fan speed for comfortable sleep.
- TEMP (Up/Down Arrows): Adjusts the desired temperature setting.
- CLOCK: Sets the current time on the remote's display.
- IFEEL: Activates the 'I Feel' function, which senses the temperature at the remote's location.
- LIGHT: Controls the display light on the air conditioner unit.
- TIMER ON: Sets a time for the air conditioner to turn ON automatically.
- TIMER OFF: Sets a time for the air conditioner to turn OFF automatically.
For specific functions not listed or if a button does not respond as expected, please consult your air conditioner's original manual, as some advanced features may not be supported by this replacement remote.
4. Maintenance
4.1 Battery Replacement
Replace batteries when the remote control's display becomes dim or when the remote no longer operates the air conditioner reliably. Always replace both batteries at the same time with new AAA batteries.
4.2 Cleaning
To clean the remote control, wipe it with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.
4.3 Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote.
4.4 Battery Disposal Warning
WARNING: DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK. Dispose of used batteries according to local regulations.
5. Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Make sure you are within the effective operating range of the air conditioner.
- Some functions do not work:
- As a replacement remote, not all functions of your original AC unit may be supported. Refer to the button descriptions in this manual.
- Ensure the air conditioner unit itself supports the desired function.
6. Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 6.3 x 3.15 x 1.18 inches |
| Item Weight | 3.52 ounces |
| Batteries Required | 2 AAA batteries |
| Connectivity Technology | Infrared |
| Controller Type | Button Control |
| Special Feature | Replacement item may not work with all functions as original |
7. Support
For further assistance or inquiries regarding this remote control, please contact the seller, SZHKHXD, through the platform where the purchase was made. Provide your order details for efficient support.
