1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your PARKVISION PJ-180SW 180° Wide-Angle Reversing Camera. Please read this manual thoroughly before installation and use to ensure proper function and safety. This camera is designed to enhance driving safety by providing a wide-angle view of your vehicle's surroundings, reducing blind spots during reversing or forward driving.
2. Product Overview
The PARKVISION PJ-180SW is a versatile car camera compatible with DC 12V-24V systems, suitable for various vehicle models. It features a 180° super wide-angle lens, IP68 waterproof rating, and enhanced night vision capabilities.
2.1 Key Features
- 180° Super Wide-Angle View: Minimizes blind spots for safer driving and parking.
- High Compatibility: Supports DC 12V-24V, compatible with most European vehicle models.
- Adjustable Functions: Switchable mirror/normal image and parking line ON/OFF.
- IP68 Waterproof: Designed to withstand dust and rain, ensuring durability in various weather conditions.
- Clear Night Vision: Equipped with advanced dark light technology and a high-resolution sensor for clear images day and night.
- Multiple Video Formats: Supports CVBS-NTSC, CVBS-PAL, AHD 720P 25fps, AHD 1080P 25fps.
2.2 Package Contents
- 1 x PARKVISION PJ-180SW Camera
- 1 x Power Cable (1M/3.2Ft)
- 1 x RCA Cable (8M/26.2Ft)
- 1 x User Manual
- 1 x Accessory (screws for mounting)
3. Setup and Installation
Follow these steps for proper installation of your PARKVISION PJ-180SW camera. Professional installation is recommended if you are unsure about any steps.
3.1 Mounting Position
The camera can be mounted in various positions, typically at the rear of the vehicle for reversing, or at the front for a front-view camera. Ensure the mounting location provides a clear, unobstructed view.
3.2 Wiring Diagram
Connect the camera according to the following diagram. The camera requires power from the vehicle's reverse light circuit for automatic activation when reversing, or from an accessory power source for continuous front view.
Wiring Steps:
- Connect the camera's power cable (red wire) to the positive terminal of your vehicle's reverse light (for rear view) or an accessory power source (for front view).
- Connect the camera's power cable (black wire) to a suitable ground point on the vehicle chassis.
- Connect the yellow RCA video output cable from the camera to the video input of your monitor or head unit.
- If your monitor requires a trigger wire for reverse camera activation, connect the small red wire extending from the RCA cable to the monitor's reverse trigger input.
Note: Ensure all connections are secure and insulated to prevent short circuits.
Video: This video demonstrates the wiring method for a similar PARKVISION camera, showing how to connect the camera to a monitor and power source. It also illustrates how to switch between front and rear view by cutting the blue cable, and how to switch the image to vertical flip by pressing a button.
Video: This video shows the installation process of a PARKVISION reversing camera, highlighting its flexible mounting options and how it integrates with the vehicle's rear.
4. Operating Instructions
4.1 Image Switching (Mirror/Normal View)
The camera supports switching between mirror image (for rear view) and normal image (for front view). This is typically controlled by a small wire loop on the camera cable. Refer to the wiring diagram for specific instructions.
4.2 Parking Line ON/OFF
The camera can display parking guidelines on the screen. This feature can be enabled or disabled by manipulating another small wire loop on the camera cable. Refer to the wiring diagram for specific instructions.
4.3 Video Format Switching
The camera supports multiple video formats (CVBS-NTSC, CVBS-PAL, AHD 720P 25fps, AHD 1080P 25fps). The format can be switched by pressing a button on the cable or by cutting specific wires. Ensure the selected format is compatible with your monitor.
Video: This video demonstrates how to switch between different video formats (NTSC, PAL, AHD 720P, AHD 1080P) by pressing a button on the camera's cable, ensuring compatibility with various monitors.
Video: This video provides instructions for a 4-pin camera, showing how to switch between 1080P and 720P formats by cutting specific wires, and how to switch between original and mirror images.
5. Maintenance
- Cleaning: Regularly clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid abrasive cleaners.
- Inspection: Periodically check all wiring connections for any signs of wear, corrosion, or damage. Ensure the camera is securely mounted.
- Weather Protection: The camera is IP68 waterproof, but extreme conditions (e.g., high-pressure car washes directly on the lens) should be avoided to prolong its lifespan.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor |
|
|
| Image is blurry or unclear |
|
|
| Image is inverted (upside down) |
|
|
| Parking lines not visible/incorrect |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Model | PJ-180SW |
| Brand | PARKVISION |
| Voltage | DC 12-24V |
| Video Resolution | 1080p (AHD), 720p (AHD), CVBS |
| Lens Type | Fisheye, Wide-angle |
| Real Visual Angle | 180 Degrees |
| Waterproof Rating | IP68 |
| Dimensions | 4 x 2 x 2 cm |
| Weight | 207 grams |
| Compatible Devices | Universal camera, fits most car models (CVBS-PAL signal system, RCA video interface) |
8. Warranty and Support
For warranty information and technical support, please refer to the official PARKVISION website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.
For additional support or to purchase longer extension cables, visit the PARKVISION Store on Amazon.
