Marvel 23004354
Contents
User Manual: Hasbro Marvel Legends Legacy Mbaku Action Figure
Model: 23004354 | Brand: Marvel (by Hasbro)
Introduction
Thank you for purchasing the Hasbro Marvel Legends Legacy Mbaku action figure. This highly detailed collectible figure is part of the Marvel Legends series, designed for display and imaginative play. Please read this manual carefully to ensure proper handling and care of your figure.
Setup
- Unboxing: Carefully remove the figure and any accessories from the packaging. Retain the packaging for future storage or reference if desired.
- Accessory Identification: Identify all included accessories. The Mbaku figure typically comes with a staff accessory.
- Initial Inspection: Inspect the figure for any visible defects or damage. If any issues are found, refer to the Warranty & Support section.
- Accessory Attachment: Gently attach the staff accessory to the figure's hand if desired. Ensure a secure fit without forcing.

Image 1: Front view of the Mbaku action figure with its staff accessory. The figure is highly detailed, showcasing its tribal armor and fur accents.
Operating (Posing and Display)
The Mbaku action figure features multiple points of articulation, allowing for a wide range of poses. Handle the figure with care to avoid damage to joints or painted surfaces.
- Joint Movement: Gently bend and rotate joints at the neck, shoulders, elbows, wrists, torso, hips, knees, and ankles to achieve desired poses. Avoid excessive force, especially when moving joints for the first time.
- Stability: When posing, ensure the figure's feet are flat on the display surface for optimal stability. Some poses may require a display stand (not included) for balance.
- Accessory Placement: The staff can be held in either hand. Position it carefully to complement the figure's pose.
- Display Environment: Display the figure in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation or paint fading.

Image 2: Close-up view of the Mbaku figure's upper body, highlighting the intricate details of its armor and the articulation points at the shoulders and elbows.
Maintenance
- Cleaning: To clean the figure, gently wipe it with a soft, dry cloth. For stubborn dust, a slightly damp cloth can be used, but ensure no water enters the joints or crevices. Avoid abrasive cleaners or solvents, as these can damage the paint or plastic.
- Storage: If storing the figure, keep it in its original packaging or a clean, dry, and dust-free container. Avoid storing in direct contact with other figures or materials that could cause paint transfer.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Figure does not stand upright. | Improper foot positioning; uneven surface; loose ankle joints. | Adjust feet to be flat on the surface. Ensure display surface is level. If joints are loose, a display stand may be necessary. |
| Joints are stiff. | New figure; cold temperature. | Gently warm the joint with warm (not hot) water or a hairdryer on a low setting for a few seconds to loosen. Do not force. |
| Accessory does not fit. | Incorrect orientation; minor molding imperfection. | Ensure accessory is oriented correctly. Apply gentle, even pressure. Do not force. |
Specifications
- Product Dimensions: 2.52 x 5.98 x 10.51 inches
- Item Weight: 9.9 ounces
- Model Number: 23004354
- Manufacturer: Hasbro
- Recommended Age: 4 years and up
- Material: Plastic
Warranty & Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Hasbro website. Keep your proof of purchase for any warranty claims.
No official product videos from the seller were found for this item.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.