Introduction
The Lost Vape Thelema Solo DNA 100C Box Mod is an advanced device featuring the powerful DNA 100C chipset. It offers a maximum output of 100 watts and supports both 21700 and 18650 battery cells (not included). Designed for versatility and performance, this device includes a 0.96-inch TFT display and a USB-C port for convenient charging. This manual provides essential information for the safe and effective use of your device.
Package Contents
- 1x Lost Vape Thelema Solo DNA 100C Box Mod
- 1x Sticker
- 1x 18650 Battery Adapter
- 1x USB-C Cable
- 1x Warranty Card
- 1x User Manual
Product Overview
The Thelema Solo DNA 100C Box Mod combines an elegant design with advanced technology. It features a durable zinc alloy and leather construction, a clear TFT display, and intuitive controls.
This image displays two Lost Vape Thelema Solo DNA 100C Box Mods side-by-side. The left device is silver with a carbon fiber grip, and the right device is black with a carbon fiber grip. Both show the fire button, display screen, adjustment buttons, and USB-C port.
Key Components:
- Fire Button: Activates the device and confirms selections.
- 0.96" TFT Display: Shows operating information such as wattage, temperature, battery level, and resistance.
- Adjustment Buttons: Used to navigate menus and adjust settings (e.g., wattage, temperature).
- USB-C Port: For charging the battery and firmware updates.
- Battery Compartment: Located behind the magnetic cover, accommodates one 21700 or 18650 battery.
Setup
1. Battery Installation
- Open the magnetic battery compartment cover.
- Insert one 21700 battery with the correct polarity (+/-). If using an 18650 battery, first insert it into the provided 18650 adapter, then insert the adapter with the battery into the device, ensuring correct polarity.
- Close the battery compartment cover securely.
2. Charging the Battery
The device supports USB-C charging at up to 5V/3A. While convenient, for optimal battery longevity and safety, it is recommended to charge batteries using an external charger.
- Connect the USB-C cable to the device's USB-C port.
- Connect the other end of the USB-C cable to a suitable power source (e.g., wall adapter, computer USB port).
- The display will indicate the charging status.
Operating Instructions
1. Power On/Off
- To turn on the device: Press the Fire Button 5 times rapidly.
- To turn off the device: Press the Fire Button 5 times rapidly.
2. Mode Selection
The DNA 100C chipset offers various operating modes:
- VW (Variable Wattage): Adjust power output in watts.
- VV (Variable Voltage): Adjust power output in volts.
- VPC (Variable Power Curve): Customize power output over time.
- Bypass: Direct battery output (unregulated).
- TC (Temperature Control): Set a maximum temperature for compatible coil materials (Ni, Ti, SS).
- Boost: Delivers a higher initial power burst at the start of a puff.
- Replay: Captures the perfect puff and repeats it consistently.
- Preheat: Preheats the coil to a higher wattage for a short duration.
Refer to the on-screen menu for navigation and selection of these modes using the adjustment buttons and fire button.
3. Adjusting Settings
- Use the adjustment buttons to increase or decrease values (e.g., wattage, temperature).
- Confirm selections with the Fire Button.
Maintenance
- Cleaning: Regularly wipe the device with a dry, soft cloth. Avoid using harsh chemicals or abrasives.
- Connections: Keep the 510 connection and USB-C port clean and free of debris to ensure proper contact and charging.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not turning on | Battery depleted or incorrectly installed; device locked. | Charge battery; check battery polarity; press Fire Button 5 times rapidly to unlock/power on. |
| No power output | Atomizer not detected; short circuit; wattage too low. | Ensure atomizer is properly connected; check atomizer for damage; adjust wattage. |
| "Check Atomizer" message | Atomizer not connected or faulty. | Re-seat atomizer; try a different atomizer; clean 510 connection. |
| "Weak Battery" message | Battery charge is low. | Recharge the battery. |
Specifications
- Dimensions: 97.5 x 28.5 x 39.0 mm
- Weight: 260 g
- Material: Zinc alloy and leather
- Power Range: 5 - 100 W
- Resistance Range: 0.15 - 5.0 Ω
- Temperature Range: 100 - 315 °C (200 - 600 °F)
- Display: 0.96" TFT Color Screen
- Battery: 1 x 21700 or 1 x 18650 (with adapter, not included)
- Charging: USB-C, 5V/3A max
- Chipset: DNA 100C
- Modes: VW, VV, VPC, Bypass, TC (Ni, Ti, SS), Boost, Replay, Preheat
- Protections: Temperature Protection, Short Circuit Protection, Low Resistance Protection, Low Voltage Protection, Reverse Polarity Protection, Overcharge Protection.
Safety Information
Please read and understand the following safety precautions before using your device:
- Use only high-quality, authentic batteries that are undamaged.
- Always ensure correct battery polarity when installing.
- Do not expose the device to water, extreme temperatures, or direct sunlight.
- Avoid dropping or subjecting the device to heavy impact.
- Keep out of reach of children and pets.
- If using an external charger, ensure it is compatible with your battery type.
- Do not attempt to disassemble or modify the device, as this will void the warranty and may cause harm.
Warranty and Support
Your Lost Vape Thelema Solo DNA 100C Box Mod comes with a warranty card included in the package. Please refer to the warranty card for details regarding coverage and duration. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Lost Vape customer service or your authorized retailer.
For more information, visit the official Lost Vape website: www.lostvape.com
