Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN Smart Motion Sensor Light. This hardwired outdoor floodlight features Bluetooth APP control, 5000K LED illumination, and IP65 waterproof rating, designed to enhance your home security and convenience.
Figure 1: OREiN Smart Motion Sensor Light with App Control Interface.
This image shows the OREiN Smart Motion Sensor Light mounted on an exterior wall, highlighting its sleek design and the accompanying smartphone application interface for control.
Safety Information
- Electrical Safety: Installation requires hardwiring to an AC power source (110 Volts). Ensure power is turned off at the circuit breaker before beginning installation. If you are not familiar with electrical wiring, consult a qualified electrician.
- Waterproofing: The product is IP65 waterproof, suitable for outdoor use. However, ensure all connections are properly sealed during installation to prevent water ingress into the wiring.
- Mounting: The base of the light is 5.12 inches x 5.12 inches. Verify sufficient space and a secure mounting surface before installation.
- Operating Temperature: Designed for outdoor conditions, but avoid extreme temperatures outside the specified operating range.
Package Contents
Verify that all components are present before proceeding with installation:
- OREiN Smart Motion Sensor Light Unit (1 Head)
- Mounting Hardware (screws, wire nuts, mounting bracket)
- LED Beads (integrated)
- Filter Lens (integrated)
- Instruction Manual (this document)
Figure 2: Included Mounting Hardware.
This image displays the small bag containing the necessary screws, wire nuts, and mounting bracket for installation.
Setup and Installation
Pre-Installation Checklist:
- Ensure power is OFF at the circuit breaker before starting.
- Confirm the mounting location has sufficient space (base is 5.12"x5.12").
- Gather necessary tools (screwdriver, wire strippers, sealant).
Installation Steps:
- Fix the Mounting Bracket: Secure the provided mounting bracket onto your junction box using the appropriate screws.
- Connect the Wires: Carefully connect the wires of the same color (live, neutral, ground) from your house wiring to the light fixture's wires using the wire nuts. Ensure connections are secure.
- Secure the Wire Connection: Use electrical tape or additional sealant around the wire nuts and connections to enhance waterproofing and prevent moisture from reaching the electrical components.
- Secure the Light: Attach the light fixture to the mounting bracket, ensuring it is firmly in place. Plug in any waterproof plugs if applicable.
Figure 3: Installation Process Overview.
This visual guide illustrates the four main steps for installing the OREiN Smart Motion Sensor Light, from securing the mounting bracket to the final attachment of the light fixture.
App Download and Initial Pairing:
The OREiN Smart Motion Sensor Light is controlled via a Bluetooth-enabled app. Search for the "AiDot" app on your smartphone's app store (iOS or Android) and install it. Follow the in-app instructions to pair your device. The light will blink twice when it is in pairing mode.
Operating Instructions
Manual Control:
The light features a single button for basic control. Click the button (within 1 second) to cycle through the two primary modes: Light Mode and Motion Mode. Refer to the product packaging for a detailed diagram of manual mode cycling.
Smart App Control (Recommended):
For full customization and convenience, use the AiDot app. This allows you to adjust settings without needing a ladder.
- On/Off Control: Remotely turn the light on or off.
- Brightness Adjustment: Customize the light intensity from 0% to 100%.
- Preset Modes: Switch between three main modes:
- Motion Mode: Light turns on when motion is detected and automatically turns off after a set delay time.
- Light Mode: Functions as a normal light, automatically turning on during its effective time (e.g., dusk to dawn).
- Security Mode: Light deters intruders by flashing or changing color (e.g., red light flashes) when motion is sensed. This mode is primarily controlled via the app.
- Custom Settings: Set delay times for motion mode, dim light mode percentages, and night economy mode for reduced light pollution after midnight.
- Timers: Schedule specific on/off times for the light.
- Group Control: Control multiple OREiN smart lights simultaneously via Bluetooth. Note: These lights are not compatible with Wi-Fi connection for group control.
Figure 4: Operational Modes.
This image illustrates the three primary operational modes: Motion Mode (light activates upon movement), Light Mode (continuous illumination), and Security Mode (flashing light for deterrence).
Figure 5: App Customization Interface.
This image displays the smartphone app's interface, demonstrating how users can customize the light's brightness, delay time, and effective operating hours.
Figure 6: Bluetooth Group Control.
This image illustrates the capability of controlling multiple OREiN lights simultaneously through Bluetooth, enabling synchronized lighting across different areas of a property.
Maintenance
- Cleaning: Periodically clean the light fixture with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the light for any signs of damage, loose connections, or wear. Ensure the IP65 seal remains intact.
- Lens Clarity: Keep the filter lens clear to ensure optimal light output and motion sensor performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose wiring, faulty unit. | Check circuit breaker. Verify all wire connections are secure. If issues persist, contact support. |
| Motion sensor not detecting. | Obstruction, incorrect sensitivity setting, sensor dirty. | Clear any obstructions. Adjust sensitivity in the app. Clean the sensor lens. |
| App connectivity issues. | Bluetooth interference, light not in pairing mode, app outdated. | Ensure Bluetooth is enabled on your device. Restart the light. Update the AiDot app. Ensure you are within Bluetooth range. |
| Light flashes unexpectedly. | Security Mode activated, electrical fluctuation. | Check app settings to ensure Security Mode is not enabled. Consult an electrician if electrical issues are suspected. |
Specifications
| Feature | Detail |
|---|---|
| Brand | OREiN |
| Model Number | OL1900156 |
| Color | Black |
| Style | Modern |
| Light Fixture Form | Wall |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Hardwired (AC) |
| Installation Type | Floor Mount (also supports Wall/Soffit) |
| Control Method | App (Bluetooth) |
| Light Source Type | LED |
| Shade Material | Polycarbonate |
| Number of Light Sources | 1 |
| Voltage | 110 Volts (AC) |
| Light Color Temperature | 5000K (White) |
| Wattage | 5.5 watts |
| Switch Type | Motion Sensor |
| Water Resistance Level | IP65 Water Resistant |
| Brightness | 720 lumen |
| Item Weight | 1.06 pounds |
| Product Dimensions | 4.3 x 4.3 x 4.7 inches |
Warranty and Support
OREiN provides comprehensive support for its products:
- Warranty: The OREiN Smart Motion Sensor Light comes with a 24-month warranty.
- Online Help: Enjoy 7*24 hours online help for any using issues.
- Call Support: Call support is available during working hours at 1-844-506-1530.
- Returns: You can return any item purchased through Amazon's logistics. However, OREiN suggests contacting them before returning for potential direct resolution.
- Contact: For any inquiries, contact OREiN directly on Amazon or search for their brand online.
