RENAISSER Turing 520

RENAISSER Turing 520 Stylus Pen User Manual

Model: Turing 520

Introduction

This manual provides comprehensive instructions for the RENAISSER Turing 520 Stylus Pen, designed for use with compatible Apple iPad models. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

The RENAISSER Turing 520 Stylus Pen features an Epson CPU, motion-activated power, smart power management, and is designed to perfectly match original iPad colors. It offers palm rejection and magnetic attachment for convenience.

Product Overview

RENAISSER Turing 520 Stylus Pen in Starlight color

Figure 1: The RENAISSER Turing 520 Stylus Pen, showcasing its sleek design and Starlight color. This pen is engineered for precision and comfort during extended use.

Internal Epson processor chip of the RENAISSER Turing 520 Stylus Pen

Figure 2: An illustration highlighting the Japanese Epson processor chip inside the RENAISSER Turing 520, emphasizing its advanced internal components for reliable performance.

RENAISSER Turing 520 Stylus Pen in various colors matching iPad models

Figure 3: The RENAISSER Turing 520 Stylus Pen available in colors such as Silver, Starlight, and Space Grey, designed to perfectly complement the aesthetic of various iPad models.

Compatibility

The RENAISSER Turing 520 Stylus Pen is compatible with specific Apple iPad models released from 2018 onwards. Please verify your iPad model number to ensure compatibility.

Compatibility chart for RENAISSER Turing 520 Stylus Pen with various iPad models and their model numbers

Figure 4: A detailed compatibility chart showing the supported iPad models and their corresponding model numbers for the RENAISSER Turing 520 Stylus Pen.

Setup and First Use

  1. Unboxing: Carefully remove the stylus pen from its packaging. Ensure all components, including any extra tips, are present.
  2. Initial Charge: Although the pen has smart power management, it is recommended to fully charge the pen before first use. Connect the stylus to a USB-C power source using a compatible cable. A 20-minute charge provides over 40 hours of use.
  3. Power On: The RENAISSER Turing 520 features motion-activated power. Simply pick up the pen, and it will automatically turn on. There is no power button to press.
  4. Pairing: The stylus does not require Bluetooth pairing. It is ready to use immediately upon activation with compatible iPad models.
  5. Magnetic Attachment: For convenient storage and charging, attach the stylus magnetically to the side of your compatible iPad. The built-in magnets ensure a strong hold, and the charging port remains accessible while attached.
User holding RENAISSER Turing 520 Stylus Pen, demonstrating motion activation

Figure 5: The RENAISSER Turing 520 Stylus Pen automatically powers on when motion is detected, eliminating the need for a manual power button.

RENAISSER Turing 520 Stylus Pen magnetically attached to an iPad, showing charging capability

Figure 6: The stylus magnetically attaches to the iPad, allowing for convenient charging even while attached, thanks to its accessible USB-C port.

Operating Instructions

Writing and Drawing

The RENAISSER Turing 520 Stylus Pen provides a natural writing and drawing experience. Simply touch the pen tip to your iPad screen to begin. The pen is designed with a balanced weight for comfortable extended use.

Palm Rejection

The stylus supports palm rejection, allowing you to rest your hand naturally on the iPad screen while writing or drawing without interfering with the input. This feature enhances comfort and precision.

Smart Power Management

To conserve battery life, the stylus will automatically turn off after 10 minutes of non-use. To reactivate, simply pick up the pen again.

Charging

The stylus charges via a USB-C port. A quick 4-minute charge provides approximately 60 minutes of use, while a 20-minute charge can provide over 40 hours of usage. The charging port is designed to be accessible even when the pen is magnetically attached to the iPad.

Diagram illustrating fast charging times and usage duration for the RENAISSER Turing 520 Stylus Pen

Figure 7: This diagram illustrates the efficient charging capabilities of the stylus, showing that a short charge provides significant usage time.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
Stylus not respondingLow battery; Incompatible iPad model; iPad settings interference.Charge the stylus for at least 4 minutes. Verify your iPad model against the compatibility list. Ensure "Apple Pencil" is disconnected or turned off in iPad Bluetooth settings if applicable.
Pen turns off unexpectedlyIdle for 10 minutes; Low battery.This is normal behavior due to smart power management. Pick up the pen to reactivate. If it turns off quickly after use, charge the battery.
Inaccurate or inconsistent inputWorn tip; Screen protector interference; iPad screen dirty.Inspect and replace the pen tip if worn. Some thick screen protectors may affect performance; try removing it temporarily to test. Clean your iPad screen.
Magnetic attachment is weakIncorrect attachment position; iPad case interference.Ensure the stylus is aligned correctly with the magnetic strip on your iPad. Some thick cases may reduce magnetic strength; try attaching without the case.

Specifications

Warranty and Support

RENAISSER products are built with quality and reliability in mind. For warranty information and technical support, please refer to the official RENAISSER website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the official RENAISSER store: RENAISSER Store on Amazon

Related Documents - Turing 520

Preview Renaisser Raphael 520/C Stylus Quick User Guide
A quick user guide for the Renaisser Raphael 520/C stylus, covering setup, usage, charging, and safety information in multiple languages.
Preview RENAISSER Raphael 520/C Quick User Guide
Concise user guide for the RENAISSER Raphael 520/C stylus, covering pen refill replacement, stylus operation on Surface devices, safety information, and support details.
Preview Raphael 520BT Quick User Guide
A quick user guide for the Raphael 520BT stylus, covering setup, pen refill replacement, Bluetooth pairing, and safety information.
Preview Raphael 530/520C Quick User Guide
This guide provides instructions on how to use the Raphael 530/520C stylus with Microsoft Surface devices, including setup, charging, and safety information.
Preview RENAISSER Raphael N520C/H520C/U1 Stylus Quick User Guide
Quick user guide for the RENAISSER Raphael N520C/H520C/U1 stylus, covering setup, charging, battery care, and safety information for use with Surface, HP, and Amazon Fire HD Max 11 devices.