1. Introduction
Thank you for choosing the DURATECH 48-Piece Portable Socket Organizer. This product is designed to provide an efficient and organized solution for storing and transporting your sockets. Its robust construction and versatile design make it suitable for various work environments, from garage workshops to professional job sites. This manual will guide you through the features, setup, operation, and maintenance of your new socket organizer.
2. Product Features
- Premium Socket Organizer: Constructed from high-quality materials, including durable ABS clips and handle, an anti-rust iron plate, and rust-proof carbon steel spring-loaded balls, ensuring long-term reliability. The ABS clips are designed for strength and resistance to breakage.
- Highly Compatible Multi-Drive: Equipped with 16 x 1/4" clips, 18 x 3/8" clips, and 14 x 1/2" clips, allowing it to hold up to 48 sockets of various drive sizes.
- Multifunctional Handle: Features a convenient handle that allows for easy portability. This design also enables secure mounting on a wall or tool cart, providing flexible storage options.
- Spring-Loaded Clips: Each socket clip incorporates spring-loaded ball bearings to firmly and securely hold your sockets in place, preventing accidental dislodgement.
- Enhanced Organization: Facilitates quick and easy identification of the correct socket, significantly improving workflow efficiency compared to disorganized toolboxes.
3. Setup and Assembly
The DURATECH 48-Piece Portable Socket Organizer requires no assembly. It is ready for use directly out of the packaging.
3.1 Initial Setup
- Unpack the socket organizer from its packaging.
- Identify the three rows of clips: 1/4" drive, 3/8" drive, and 1/2" drive. These are typically marked or can be identified by the size of the clips.
- Begin placing your sockets onto the corresponding clips. Ensure the socket's drive end aligns with the clip's ball bearing for a secure fit.
4. Operating Instructions
4.1 Storing Sockets
- To attach a socket: Align the square drive opening of the socket with the spring-loaded ball bearing on the clip. Push the socket firmly onto the clip until it clicks into place.
- To remove a socket: Grasp the socket firmly and pull it directly off the clip. A slight twisting motion may assist in removal if the fit is very tight.
4.2 Placement and Portability
- Drawer Storage: The flat design of the organizer allows it to fit neatly into most standard toolbox drawers, keeping sockets tidy and preventing rolling.
- Benchtop Use: Place the organizer on your workbench for easy access to frequently used sockets during tasks.
- Wall/Tool Cart Mounting: Utilize the integrated handle to hang the organizer on a pegboard, wall, or the side of a tool cart. Ensure the mounting point is secure and capable of supporting the weight of the organizer plus all sockets.
- Portability: The sturdy handle allows for convenient transport of your sockets between different work areas or job sites.
5. Maintenance
Proper maintenance will extend the life and functionality of your DURATECH Socket Organizer.
- Cleaning: Wipe down the organizer regularly with a clean, dry cloth to remove dust, dirt, and grease. For stubborn grime, a mild detergent solution can be used, followed by thorough drying.
- Inspection: Periodically inspect the ABS clips and the spring-loaded ball bearings for any signs of wear or damage. Ensure the clips retain their firm grip on sockets.
- Storage: Store the organizer in a dry environment to prevent any potential corrosion, although the iron plate and ball bearings are designed to be anti-rust and rust-proof.
6. Troubleshooting
Most issues with the socket organizer are related to improper use or extreme conditions. If you encounter problems, consider the following:
- Sockets not holding securely: Ensure the socket's drive size matches the clip's designated size (1/4", 3/8", or 1/2"). Verify that the socket is pushed fully onto the spring-loaded ball bearing. If clips appear loose or damaged, contact customer support.
- Difficulty removing sockets: Ensure you are pulling the socket straight off the clip. Avoid twisting excessively, which can put undue stress on the clip. If a socket is stuck, apply firm, steady pressure.
- Organizer appears warped or damaged: Avoid exposing the organizer to extreme temperatures or heavy impacts, which can deform the ABS material.
7. Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | Hangzhou Great Star Industrial Co,.LTD |
| Part Number (Model) | DT406025AE |
| Item Weight | 1.39 pounds |
| Package Dimensions | 12.2 x 6.5 x 1.69 inches |
| Size | 48pc |
| Color | Red |
| Material | Iron (Plate), ABS (Clips/Handle) |
| Item Package Quantity | 1 |
| Number Of Pieces | 1 |
| Handle Material | ABS |
| Batteries Included? | No |
| Batteries Required? | No |
| Date First Available | June 29, 2022 |
8. Warranty and Support
DURATECH products are manufactured to high-quality standards. Specific warranty information, including terms and conditions, is typically provided with your purchase documentation or can be found on the official DURATECH website. Please retain your proof of purchase for any warranty claims.
For technical support, product inquiries, or warranty service, please visit the official DURATECH website or contact their customer service department. You can find more information and contact details at the DURATECH Store on Amazon.
