DaVinci Charlie 4-in-1 Convertible Baby Crib with Changing Table

Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your DaVinci Charlie 4-in-1 Convertible Baby Crib with Changing Table. Please read all instructions carefully before assembly and retain this manual for future reference. This product is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed.

Safety Information

WARNING: Always refer to the included assembly instructions and safety warnings provided with your product. Failure to follow these warnings and instructions could result in serious injury or death.

• Ensure all parts are correctly assembled and fasteners are tightened securely before use.
• Regularly check all screws, bolts, and other hardware to ensure they are tight and secure.
• Do not use the crib if any parts are missing, damaged, or broken. Contact DaVinci customer support for replacement parts.
• This product is GREENGUARD Gold Certified, meaning it has been tested for over 10,000 chemical emissions and VOCs for healthier indoor air quality.
• For changing table use, always keep your child within arm's reach.

Product Features

• 4-in-1 Convertibility: Easily transitions from a crib to a toddler bed, daybed, and full-size bed (conversion kits sold separately).
• GREENGUARD Gold Certified: Tested for chemical emissions and VOCs.
• Integrated Changing Table: Features three spacious drawers and two open storage shelves.
• Adjustable Mattress Heights: Four positions to accommodate your child's growth.
• Durable Construction: Crafted from sturdy New Zealand pine wood.

Assembly Instructions

Your DaVinci Charlie crib and changing table combo comes with detailed assembly instructions. It is recommended to have two adults for assembly. Ensure all components are present and undamaged before beginning. An assembly instruction manual is included in the box.

• Unpack all components and verify against the parts list in the included manual.
• Lay out all hardware and tools as specified.
• Follow the step-by-step diagrams and written instructions carefully.
• Do not overtighten screws during initial assembly; tighten all fasteners securely once the unit is fully assembled.
• Ensure the crib mattress support is installed at the correct height for your child's developmental stage.

Operating Instructions

4-in-1 Convertibility

The DaVinci Charlie crib is designed to grow with your child through four stages:

1. Crib: For infants and young toddlers.
2. Toddler Bed: Remove the front rail and install the toddler conversion kit (M12599 or M14999 for models before Oct 2024, sold separately).
3. Daybed: Remove the front rail, no additional kit required.
4. Full-Size Bed: Utilize the headboard and footboard with a full-size conversion kit (M14989, sold separately) and bunkie board (M26058B, sold separately).

Adjustable Mattress Heights

The crib features four adjustable mattress positions to ensure safety and comfort as your child develops:

• Highest Position: For newborns, allowing easy access for parents.
• Mid-High Position: When your baby can roll over.
• Mid-Low Position: When your baby can sit up unassisted.
• Lowest Position: When your baby can stand, to prevent climbing out.

Changing Table and Storage

The integrated changing table provides a convenient space for diaper changes and features three drawers for storing essentials. Two open storage shelves are located on the side for additional accessibility.

Maintenance

To maintain the quality and appearance of your DaVinci Charlie crib and changing table, wipe surfaces with a damp cloth as needed. Avoid using abrasive cleaners or harsh chemicals that may damage the finish.

Troubleshooting

If you encounter any issues during assembly or use, please review the following common solutions:

• Missing or Damaged Parts: Carefully check all packaging for small parts. If any parts are missing or damaged, do not proceed with assembly. Contact DaVinci customer support for assistance.
• Assembly Difficulties: Re-read the assembly instructions, paying close attention to diagrams and fastener types. Ensure all pieces are oriented correctly.
• Stability Issues: Verify that all screws and bolts are fully tightened. Ensure the crib is placed on a flat, level surface.

Specifications

Warranty and Support

For any questions, concerns, or to inquire about replacement parts, please contact DaVinci customer support. This product typically includes a manufacturer's warranty; refer to your purchase documentation for specific terms and conditions. Additionally, a 90-day free return policy is often available through authorized retailers.

For customer support, please visit the official DaVinci website or contact your retailer.