Brightown GYPI-O100LAU

Download PDF
Contents

Brightown C9 LED Christmas String Lights Instruction Manual

Model: GYPI-O100LAU | 100 FT Warm White

Introduction

Thank you for choosing Brightown C9 LED Christmas String Lights. This manual provides essential information for the safe and efficient use of your lighting product. Please read these instructions carefully before installation and operation, and retain them for future reference.

Safety Information

  • Ensure the power plug is protected from moisture when used outdoors.
  • This product is UL Certified to minimize shock and fire risks.
  • Do not install near gas or electric heaters, fireplaces, candles, or other similar heat sources.
  • Do not secure the wiring of the product with staples or nails, or place it on sharp hooks or nails.
  • Do not let lamps rest on the supply cord or on any wire.
  • Disconnect the product from power when leaving the house, when retiring for the night, or if left unattended.
  • This is an electrical product, not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small children can reach it.

Package Contents

The Brightown C9 LED Christmas String Lights package includes:

  • 100 C9 LED Strawberry Bulbs (Warm White) on a 100 FT string
  • 1 Spare Fuse
  • 2 Spare Bulbs
Image showing the Brightown C9 LED Christmas String Lights with one spare bulb and one spare fuse.
The package includes the 100-foot string of lights, a spare bulb, and a spare fuse for convenience.

Specifications

Model NumberGYPI-O100LAU
ColorC9 Warm White
Length100 Feet
Number of Lights100
Bulb Shape SizeC9
Bulb Spacing12 inches
Lead Length6 inches (on either end)
Power SourceCorded Electric
Voltage120 Volts
Wattage per Bulb1 Watt
Special FeaturesDimmable, Shatterproof, Waterproof (IP65)
Indoor/Outdoor UsageOutdoor
CertificationsUL Certified
MaterialPlastic
Diagram illustrating key features of the C9 LED bulb, including its shatterproof design, 1-watt power consumption, dimmability, and 2 SMD LED technology.
Key features of the C9 LED bulb, highlighting its robust construction and energy efficiency.
Diagram showing the dimensions of the C9 LED bulb, the 12-inch spacing between bulbs, 6-inch lead lengths, and how to replace a bulb.
Detailed dimensions and spacing of the lights, along with instructions for bulb replacement.

Setup and Installation

  1. Unpack and Inspect: Carefully remove the string lights from the packaging. Inspect all bulbs and the cord for any damage.
  2. Placement: Determine the desired location for your lights. These lights are suitable for both indoor and outdoor use. For outdoor use, ensure the power plug is protected from moisture.
  3. Hanging: Use the integrated socket clips for hanging the lights securely. Avoid using staples or nails that could damage the wiring.
  4. Connecting Multiple Strands: Up to four (4) strands of these lights can be connected end-to-end for a total length of 400 feet. Ensure connections are secure.
  5. Power Connection: Plug the string lights into a standard 120V electrical outlet.
Brightown C9 LED Christmas String Lights installed along a wooden fence, illuminating the area with warm white light.
Example of lights installed on a wooden fence, demonstrating outdoor application.
Collage of various Christmas light displays, including a house exterior, a Christmas market scene, and a decorated indoor Christmas tree, all illuminated with warm white C9 LED lights.
Versatile application of the lights for various indoor and outdoor holiday decorations.

Video: Installation and Features Overview

This video provides a visual guide to the features and potential uses of the Brightown C9 LED Christmas String Lights, including their waterproof design and general appearance.

Operating Instructions

Once properly installed and connected to power, your Brightown C9 LED Christmas String Lights will illuminate. These lights are designed for simple operation.

  • Power On/Off: The lights are controlled by plugging them into or unplugging them from the power outlet.
  • Dimmability: These lights are PWM dimmer compatible. If you wish to dim the lights, connect them to a compatible dimmer switch (sold separately). Follow the dimmer manufacturer's instructions for installation and operation.
Close-up view of multiple Brightown C9 LED Christmas String Lights bulbs, glowing with a warm white light, showcasing their strawberry shape and textured surface.
The C9 LED bulbs emit a bright, warm white light.

Maintenance

  • Cleaning: Disconnect the lights from power before cleaning. Wipe bulbs and wires with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Bulb Replacement: If a bulb needs replacement, ensure the string is unplugged. Unscrew the old bulb and screw in a new C9 LED replacement bulb. The lights use parallel wiring, so if one light goes out, the rest will stay on. Replacement bulbs can be found by searching for B077PHPFXB.
  • Fuse Replacement: If the entire string does not light up, check the fuse located in the plug. To replace, slide open the fuse cover, remove the old fuse, and insert a new one (a spare fuse is included). Close the cover securely.
  • Storage: When not in use, store the lights in a cool, dry place, away from direct sunlight. Carefully coil the string to prevent tangling and damage to the wires or bulbs.

Video: Product Features and Maintenance

This video demonstrates key features such as the shatterproof design, connectability, waterproof rating, and how to replace the fuse in the plug.

Troubleshooting

ProblemPossible CauseSolution
Lights do not turn on.No power, blown fuse, loose connection.
  • Ensure the plug is fully inserted into a working outlet.
  • Check and replace the fuse in the plug if blown (refer to Maintenance section).
  • Verify all connections are secure, especially if multiple strands are linked.
Some bulbs are out.Individual bulb failure.
  • Due to parallel wiring, other bulbs will remain lit.
  • Unplug the string and replace the faulty bulb with a new C9 LED replacement bulb (refer to Maintenance section).
Lights are flickering.Loose bulb, unstable power, or rectifier issue.
  • Ensure all bulbs are screwed in tightly.
  • Test the lights in a different outlet.
  • The bulbs have a built-in rectifier to prevent strobe lighting. If flickering persists, contact customer support.

Warranty and Support

Brightown products are designed for durability and performance. For specific warranty details, please refer to the product packaging or contact Brightown customer support.

If you encounter any issues or have questions regarding your Brightown C9 LED Christmas String Lights, please contact our customer support team for assistance. You can typically find contact information on the product packaging or the official Brightown website.

Replacement bulbs can be found by searching for ASIN B077PHPFXB.

© 2026 Brightown. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.