NovaStar VX16s 4K LED Video Processor User Manual

1. Introduction

The NovaStar VX16s is an advanced all-in-one controller designed for LED display systems. It seamlessly integrates video processing, video control, and LED screen configuration into a single unit. This device supports Ultra HD 4K×2K@60Hz image processing and sending capabilities, managing up to 10.4 million pixels. When used with NovaStar's V-Can video control software, the VX16s facilitates rich image mosaic effects and streamlined operations. This manual provides essential information for the proper installation, operation, and maintenance of your VX16s unit.

2. Safety Information

Please read and understand all safety instructions before operating the device to prevent injury or damage. Keep this manual for future reference.

Ensure the power supply voltage matches the device's requirements (AC 100~240V).
Do not expose the device to rain, moisture, or extreme temperatures.
Avoid blocking ventilation openings to prevent overheating.
Only use accessories specified by the manufacturer.
Refer all servicing to qualified personnel.
Disconnect power before cleaning or performing maintenance.

3. Package Contents

Carefully unpack the box and verify that all items listed below are included. If any items are missing or damaged, contact your supplier.

Contents of the NovaStar VX16s package including the main unit, power cable, DVI cable, HDMI cable, USB cable, Ethernet cable, and quick start guide.

Figure 3.1: NovaStar VX16s Package Contents. This image shows the VX16s unit, a power cord, DVI cable, HDMI cable, USB cable, Ethernet cable, and a Quick Start Guide, all neatly packed in the box.

NovaStar VX16s Unit
Power Cord
DVI Cable
HDMI Cable
USB Cable
Ethernet Cable
Quick Start Guide

4. Product Overview

4.1 Front Panel

Front panel of the NovaStar VX16s LED Video Processor showing input buttons, control knob, and function buttons.

Figure 4.1: NovaStar VX16s Front Panel. The front panel features an ON/OFF switch, input selection buttons (HDMI, DVI, SDI), a central display screen, a menu control knob, and dedicated function buttons for MAIN, PIP1, PIP2, ESC, SCALE, and FN.

The front panel provides access to essential controls and indicators for real-time operation and monitoring.

Power Switch: Turns the device on or off.
Input Buttons: Selects the active input source (HDMI, DVI, SDI).
Display Screen: Shows current status, menu options, and configuration details.
Control Knob: Navigates menus and adjusts parameters.
Function Buttons:
- MAIN: Controls the main layer.
- PIP1/PIP2: Controls Picture-in-Picture layers.
- ESC: Exits current menu or cancels an operation.
- SCALE: Accesses image scaling options.
- FN: Customizable function button.

4.2 Rear Panel

Rear panel of the NovaStar VX16s LED Video Processor showing various input and output ports.

Figure 4.2: NovaStar VX16s Rear Panel. This image details the rear panel, featuring Ethernet ports (1-16), Control ports (Ethernet, RS232, USB), Input ports (DVI 1-4, HDMI 2.0, 3G-SDI 1-2), an Output Monitor port (HDMI), and the AC power input.

The rear panel houses all input, output, and control connections.

Input Connectors:
- 2x 3G-SDI
- 1x HDMI 2.0
- 4x SL-DVI
Ethernet Output Ports: 16 ports for LED screen connection, supporting up to 10,400,000 pixels.
Control Ports: Ethernet, RS232, USB for V-Can software connection and device control.
Monitor Output: HDMI port for monitoring the output signal.
AC Power Input: For connecting the power cord.

5. Setup

5.1 Physical Installation

The VX16s is designed for rack mounting. Ensure adequate ventilation around the unit.

Mount the device securely in a standard 19-inch equipment rack.
Ensure sufficient space for cable connections and airflow.
Connect the power cord to the AC power input on the rear panel and then to a grounded power outlet.

Top-down view of the NovaStar VX16s with dimensions indicated in millimeters.

Figure 5.1: NovaStar VX16s Dimensions. This diagram shows the top-down view of the VX16s unit with its physical dimensions in millimeters, useful for rack installation planning.

5.2 Input/Output Connections

Connect your video sources and LED display panels to the appropriate ports on the rear panel.

Video Inputs: Connect your video sources (e.g., media players, cameras) to the HDMI, DVI, or 3G-SDI input ports.
LED Display Outputs: Connect the Ethernet output ports (1-16) to your LED display panels using standard Ethernet cables.
Monitor Output: Connect an external monitor to the HDMI MONITOR output for real-time preview of the processed video.
Control Connection: Connect a computer running NovaStar V-Can software to the CONTROL Ethernet port or USB port for advanced configuration and control.

6. Operating Instructions

6.1 Power On/Off

To power on the device, flip the power switch on the front panel to the 'ON' position. The display screen will illuminate. To power off, flip the switch to 'OFF'.

6.2 Input Source Selection

Press the corresponding input button on the front panel (HDMI, DVI, SDI) to select your desired video source. The active input will be indicated on the display screen.

6.3 Layer Management (Main and PIPs)

The VX16s supports 3 independent layers: one 4K×2K main layer and two 2K×1K Picture-in-Picture (PIP) layers (PIP 1 and PIP 2). Use the MAIN, PIP1, and PIP2 buttons on the front panel to select and configure each layer. Layer priorities are adjustable via the menu.

6.4 Image Scaling

Press the SCALE button to access image scaling options. The VX16s offers three scaling modes:

Pixel-to-Pixel: Displays the input source at its native resolution without scaling.
Full Screen: Scales the input source to fill the entire LED display area.
Custom Scaling: Allows for manual adjustment of resolution and position.

6.5 3D Display Function

The device supports 3D display effects on the LED screen. To enable this function, navigate through the menu using the control knob. Note: When the 3D function is enabled, the device's output capacity will be halved.

6.6 DVI Mosaic

Up to four DVI inputs can be combined to form a single, independent input source, known as DVI Mosaic. This feature is configured via the V-Can software or the device's menu.

6.7 Preset Management

The VX16s allows you to save up to 10 presets for various display configurations. This enables quick recall of frequently used setups. Presets can be saved and loaded via the device's menu or V-Can software.

6.8 EDID Management

The device supports both custom EDID and standard EDID management, allowing for optimized communication between the video sources and the processor. This can be configured in the system settings.

6.9 Device Backup

The VX16s includes a device backup design to ensure system stability and data integrity. Consult the full user manual for detailed instructions on utilizing backup features.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your VX16s.

Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid or aerosol cleaners.
Ventilation: Periodically check that all ventilation openings are clear of dust and obstructions.
Firmware Updates: Check the NovaStar official website for the latest firmware updates to ensure compatibility and access to new features.

8. Troubleshooting

This section addresses common issues you might encounter. For more complex problems, contact technical support.

Problem	Possible Cause	Solution
No power	Power cable disconnected; Power switch off; Power outlet fault.	Check power cable connection; Ensure power switch is ON; Test power outlet with another device.
No video output on LED screen	Incorrect input selected; Output cables disconnected; LED screen not configured correctly.	Verify active input source; Check Ethernet cable connections to LED panels; Ensure LED screen configuration (resolution, mapping) is correct via V-Can software.
Image distortion or incorrect colors	Incorrect EDID settings; Cable issues; Scaling issues.	Adjust EDID settings; Replace video cables; Check image scaling options.
V-Can software cannot connect to device	Ethernet/USB cable disconnected; Network settings incorrect; Firewall blocking connection.	Check control cable connections; Verify IP address settings; Temporarily disable firewall for testing.

9. Specifications

Technical specifications for the NovaStar VX16s 4K LED Video Processor.

Model: VX16s
Input Voltage: AC 100~240V
Max Loading Capacity: 10,400,000 pixels
Input Connectors:
- 2x 3G-SDI
- 1x HDMI 2.0
- 4x SL-DVI
Output Ports: 16x Ethernet output ports
Layers: 3 independent layers (1x 4K×2K main, 2x 2K×1K PIPs)
Image Processing: Ultra HD 4K×2K@60Hz
Decimal Frame Rate Support: 23.98 Hz, 29.97 Hz, 47.95 Hz, 59.94 Hz, 71.93 Hz, 119.88 Hz
3D Display: Supported (output capacity halved when enabled)
Scaling Options: Pixel-to-pixel, full screen, custom scaling
DVI Mosaic: Up to 4 DVI inputs can form an independent source
Presets: Up to 10 configurable presets
Control: V-Can software, front panel controls
Compatible Devices: Monitor, Television, Projector (as output/monitoring)
Color: Black

10. Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official NovaStar website. Keep your purchase receipt as proof of purchase for warranty claims.

Online Support: Visit the NovaStar official website for FAQs, software downloads, and contact information.
Technical Assistance: Contact NovaStar customer service for assistance with setup, troubleshooting, or operational questions.

	NovaStar VX2000 Pro All-in-One Controller Specifications Detailed specifications for the NovaStar VX2000 Pro All-in-One Controller, covering its features, connectivity, performance, and operational parameters.
	NovaStar VX16s All-in-One Controller User Manual Comprehensive user manual for the NovaStar VX16s All-in-One Controller, detailing its features, operations, settings, and specifications for LED video processing and control.
	NovaStar VX1000 Pro All-in-One Controller Specifications Detailed specifications for the NovaStar VX1000 Pro All-in-One Controller, covering features, connectivity, performance, dimensions, and operating parameters for professional video processing and LED screen control.
	NovaStar VX600 Pro All-in-One Controller Specifications Detailed specifications for the NovaStar VX600 Pro, an all-in-one LED video controller, covering its features, input/output capabilities, performance, operational modes, and technical parameters.
	NovaStar VX2000 Pro All-in-One Controller Specifications Detailed specifications for the NovaStar VX2000 Pro All-in-One Controller, covering features, connectivity, performance, dimensions, and operating requirements for professional LED display control.
	NovaStar VX6s All-in-One Controller Specifications Detailed specifications for the NovaStar VX6s All-in-One Controller, featuring 7 video inputs, 6 Gigabit Ethernet outputs, advanced video processing, and flexible display control solutions from Xi'an NovaStar Tech Co., Ltd.

NovaStar VX16s