Autel MaxiCharger Home EV Charger (40 Amp, NEMA 6-50) Instruction Manual

Introduction

The Autel MaxiCharger Home is a Level 2, 240 Volt electric vehicle (EV) charging station designed for residential use. It provides efficient charging for any EV or plug-in hybrid vehicle. This manual provides essential information for the safe and effective installation, operation, and maintenance of your MaxiCharger Home EVSE.

Figure 1: Autel MaxiCharger Home EV Charger unit with its charging cable and a mobile app interface displaying charging status.

Safety Information

Always adhere to local electrical codes and safety regulations during installation and operation. Ensure the charging station is installed on a dedicated circuit with appropriate overcurrent protection. Avoid using extension cords or adapters not approved for EV charging. Keep the charging cable and connector clean and free from damage. In case of any malfunction, disconnect power immediately and contact customer support.

What's in the Box

• Charging Station
• Holster
• Bottom Entry Power Conduit Plug
• Wall Dock, Wall Anchor, Screw, Screwdriver
• Installation Guide, Packing List, Amperage Labels

Setup and Installation

The MaxiCharger Home is designed for straightforward installation. For NEMA plug-in models, simply mount the unit and plug it into a compatible 240V NEMA 6-50 outlet. For hardwired installations (if applicable to your model variant), it is recommended to consult a licensed electrician to ensure compliance with all electrical codes and safety standards.

Figure 2: The mounting bracket allows for quick and secure installation of the charger unit.

Play video

Video 1: This video demonstrates the installation process for the Autel MaxiCharger Home NEMA Plug model, showing how to mount the unit and connect it to the power outlet.

The durable 25-foot cable provides ample reach for various parking configurations, whether indoors or outdoors. The unit is rated NEMA 4 for weather resistance, ensuring reliable operation in diverse climates.

Figure 3: The 25-foot charging cable provides extended reach for flexible parking options.

Operating Instructions

The MaxiCharger Home offers smart charging capabilities through its mobile application and optional RFID card functionality.

Connecting to Your EV

1. Ensure your vehicle is parked and turned off.
2. Open your EV's charging port.
3. Take the J1772 connector from the MaxiCharger Home and firmly insert it into your EV's charging port until it clicks into place.
4. The charger will initiate the charging process automatically or based on your app settings.

Using the Autel Charge Mobile App

The Autel Charge mobile app allows you to monitor, manage, and schedule your EV charging sessions. The charger supports Wi-Fi, Bluetooth, and Ethernet connectivity for seamless communication.

Figure 4: Remotely control and monitor your charging sessions via the Autel Charge app.

Figure 5: The app provides real-time charging status, including energy consumed, cost, and power.

• Adjustable Power Output: Set the charging current from 6 to 40 Amps to suit your home's electrical capacity and lifestyle.
• Scheduled Charging: Optimize charging times to take advantage of off-peak electricity rates.
• Energy Monitoring: Track energy consumption and costs directly from the app.
• Remote Start/Stop: Control charging sessions from anywhere.

Figure 6: Set custom charging schedules for weekdays and weekends to utilize off-peak rates.

Figure 7: Adjust the maximum charge current directly from the app interface.

RFID Card Functionality

The optional RFID card functionality allows you to prevent unauthorized use of your charging station. Simply tap the card to start or stop charging.

Video 2: This video demonstrates how to add and use an RFID charge card with the Autel MaxiCharger Home.

Maintenance

Regularly inspect the charging cable and connector for any signs of wear or damage. Keep the unit clean and free from debris. Do not attempt to open or repair the charging station yourself. Contact customer support for any service needs.

Troubleshooting

If the charger is not operating as expected, first check the app for any error messages or status indicators. Ensure the NEMA plug is securely connected to the wall outlet and the charging connector is properly inserted into your EV. If issues persist, refer to the detailed troubleshooting section in the full installation guide or contact Autel customer support.

Specifications

Warranty and Support

The Autel MaxiCharger Home comes with a 3-year warranty. For any assistance, 24/7 customer support is available. Automatic over-the-air (OTA) firmware updates ensure your charger always has the latest features and improvements.