1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Toro Genuine OEM RWD Rear Drive Wheels. These wheels are designed to ensure optimal performance and traction for compatible Toro 22-inch Recycler Lawn Mowers.
It is crucial to read and understand all instructions before attempting any installation or maintenance procedures. Retain this manual for future reference.
Image 1.1: Two Toro Genuine OEM RWD Rear Drive Wheels. These wheels feature a skid-resistant tread pattern and are designed for rear-wheel drive lawn mowers.
2. Safety Information
Always prioritize safety when working with machinery and replacement parts. Failure to follow safety guidelines can result in injury or damage to equipment.
- Read the Mower Manual: Before installing these wheels, consult your specific Toro lawn mower's owner's manual for detailed safety instructions and wheel replacement procedures.
- Disconnect Power: Always ensure the lawn mower's engine is off and the spark plug wire is disconnected before performing any maintenance or installation.
- Wear Protective Gear: Use appropriate personal protective equipment (PPE), such as gloves and eye protection, during installation.
- Secure the Mower: When lifting or tilting the mower, ensure it is stable and securely supported to prevent it from falling.
- Use Correct Tools: Utilize the proper tools for the job to avoid damaging parts or causing injury.
- Keep Children and Pets Away: Ensure no one is in the immediate work area during installation or maintenance.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
3. Product Features and Compatibility
3.1 Key Features
- Genuine Toro OEM Part Number 138-3216
- Replaces Toro Part Number 115-4695
- Set of 2 Wheels included
- Designed with Skid Resistant Tread for improved traction
- Specifically engineered for Rear Wheel Drive (RWD) lawn mowers
3.2 Compatible Lawn Mower Models
These RWD Rear Drive Wheels are compatible with the following 22-inch Toro Recycler Lawn Mower models:
- 20332, 20332C
- 20333, 20333C
- 20334, 20334C
- 20338
- 20352
- 20372
- 20373
- 20374
- 20376
- 20955 (55cm Recycler Lawn Mower)
- 20956 (55cm Recycler Lawn Mower)
- 20958 (55cm Recycler Lawn Mower)
Note: Always verify your specific lawn mower model number to ensure compatibility before purchasing and installing replacement parts.
4. Setup and Installation
The following are general steps for replacing a lawn mower wheel. Specific procedures may vary depending on your mower model. Refer to your mower's owner's manual for detailed instructions.
- Prepare the Mower:
- Ensure the engine is cool.
- Disconnect the spark plug wire to prevent accidental starting.
- If the mower has a fuel tank, ensure it is less than half full and tilt the mower so the carburetor side is facing up to prevent fuel leakage.
- Securely prop the mower on a stable surface, ensuring the wheel to be replaced is accessible and the mower cannot tip over.
- Remove the Old Wheel:
- Locate the retaining bolt or nut that secures the wheel to the axle. This may be covered by a hubcap or dust cover.
- Use an appropriate wrench or socket to loosen and remove the bolt/nut.
- Carefully slide the old wheel off the axle. Note the position of any washers or spacers.
- Install the New Wheel:
- Ensure the axle is clean and free of debris.
- Align the new Toro RWD Rear Drive Wheel (Part 138-3216) with the axle. Ensure any washers or spacers are correctly positioned as they were on the old wheel.
- Slide the new wheel onto the axle.
- Reinstall the retaining bolt or nut. Tighten it securely, but do not overtighten, as this can damage the wheel or axle.
- Test the Installation:
- Gently spin the newly installed wheel to ensure it rotates freely without binding.
- Lower the mower back to its operating position.
- Reconnect the spark plug wire.
- Briefly operate the mower to confirm proper wheel function and traction.
If you encounter any difficulties, consult a qualified service technician or refer to your mower's detailed service manual.
5. Operating Considerations
These RWD Rear Drive Wheels are designed to provide effective traction for your self-propelled Toro lawn mower. Proper operation of your mower, including maintaining appropriate ground speed and avoiding obstacles, will contribute to the longevity and performance of these wheels.
- Traction: The skid-resistant tread pattern is designed to maximize grip on various lawn surfaces.
- Maneuverability: Ensure wheels are free of debris to allow for smooth turning and movement.
- Even Wear: Operating the mower on relatively flat surfaces and avoiding excessive turns in one direction can help promote even wear across both rear wheels.
6. Maintenance
Regular maintenance of your lawn mower's wheels can extend their lifespan and ensure continued optimal performance.
- Regular Cleaning: After each use, clean any grass clippings, dirt, or debris from around the wheels and axles. Accumulated debris can hinder rotation and cause premature wear.
- Inspect for Wear: Periodically inspect the wheel treads for signs of excessive wear, cracks, or damage. Worn treads can reduce traction.
- Check for Play: Check if the wheels have excessive side-to-side play on the axle. If so, ensure the retaining bolt/nut is tight. If play persists, inspect the axle or wheel hub for wear.
- Lubrication (if applicable): Some mower axles may benefit from light lubrication. Consult your mower's manual for specific lubrication recommendations for the wheel axles. Avoid lubricating the wheel tread.
- Storage: When storing the mower for extended periods, ensure the wheels are clean and dry.
7. Troubleshooting
This section addresses common issues related to lawn mower wheels. For more complex problems, consult a professional technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Wheel does not spin freely or is stiff. |
|
|
| Poor traction or slipping wheels. |
|
|
| Wheel wobbles or has excessive play. |
|
|
8. Specifications
| Attribute | Value |
|---|---|
| Part Number | 138-3216 (Replaces 115-4695) |
| Brand | Toro |
| Wheel Size / Item Diameter | 22 Inches |
| Vehicle Service Type | Mower |
| Load Index | 250 |
| Automotive Fit Type | Vehicle Specific Fit |
| Quantity | 2 Wheels per pack |
9. Warranty and Support
As a Genuine Toro OEM part, these wheels are manufactured to Toro's high standards. For specific warranty information regarding genuine Toro replacement parts, please refer to the warranty documentation provided with your original Toro lawn mower or visit the official Toro website.
For technical support, parts inquiries, or to locate an authorized Toro service dealer, please visit the official Toro website or contact Toro customer service directly. Always provide your product model and serial number when seeking support.
Toro Official Website: www.toro.com
Image 9.1: Official Toro Brand Logo.
