Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your USA Toyz Glow Trax Glow in The Dark Race Tracks set. This set is designed to provide an engaging and educational play experience, encouraging the development of motor skills, thinking skills, problem-solving abilities, teamwork, and cooperation. Please read this manual thoroughly before use to ensure proper setup and safe enjoyment of the product.
What's in the Box
Upon opening your USA Toyz Glow Trax set, please verify that all components listed below are present.
- 360 Colorful Track Pieces
- 2 LED Light-Up Race Cars
- Road Signs/Road Stops
- 2 Trax Spheres
- 1 Bridge
- 1 Intersection
- 2 Slope Frames
Image: All components included in the USA Toyz Glow Trax Glow in The Dark Race Tracks set. This includes 360 colorful track pieces, two LED light-up race cars, road signs, two trax spheres, one bridge, one intersection, and two slope frames.
Setup Instructions
- Track Assembly: The flexible track pieces are designed to snap together easily. Align the connectors on the ends of two track pieces and press them firmly until they click into place. You can create various shapes and layouts, including loops, curves, and straightaways.
Image: A close-up view demonstrating how the flexible track pieces connect by snapping together. Arrows indicate the direction of connection.
- Bridge and Slope Frame Installation: The bridge and slope frames provide elevation and dynamic elements to your track. Position the bridge supports and slope frames where desired on your track layout and connect the track pieces to their designated slots.
- Intersection Setup: The intersection piece allows for multiple track paths to cross. Integrate it into your track layout by snapping track pieces into its four connection points.
- LED Race Car Battery Installation: Each LED race car requires 2 AA batteries (not included). Locate the battery compartment on the underside of each car. Use a small Phillips head screwdriver to open the compartment, insert the batteries according to the polarity indicators (+/-), and secure the cover.
- Road Signs and Trax Spheres: Place the road signs around your track for added realism. The trax spheres can be placed on the track for the cars to push, adding another interactive element to play.
Image: Several example track configurations, showcasing the use of track pieces, bridges, and road signs to create diverse race courses.
Operating Instructions
- Powering On the Cars: Locate the ON/OFF switch on the bottom of each LED race car. Slide the switch to the "ON" position. The car's headlights and underglow LEDs will illuminate.
- Placing Cars on Track: Gently place the powered-on cars onto the assembled track. Ensure the wheels are properly aligned with the track grooves.
- Glow-in-the-Dark Feature: The track pieces are made from glow-in-the-dark material. To activate the glow effect, expose the track to bright light (natural sunlight or artificial light) for a period of time. The longer the exposure, the brighter and longer the glow will last in a darkened room. The LED lights on the cars also enhance the glow effect as they move along the track.
Image: The flexible race tracks glowing in the dark, with the LED cars illuminating the path as they race.
- Flexible Track Manipulation: The track pieces are highly flexible, allowing you to bend, loop, and twist them into various configurations even while cars are running. This enables dynamic play and continuous track modification.
Image: A demonstration of the track's flexibility, showing it twisted and bent into a circular loop, highlighting its "Super Twisty & Bendy" nature.
Maintenance
- Cleaning: To clean the track pieces and cars, wipe them with a dry or slightly damp cloth. Do not submerge any electronic components (cars) in water. Avoid using harsh chemicals or abrasive cleaners.
- Storage: When not in use, the track pieces can be easily disassembled and rolled up for compact storage. Store the set in a cool, dry place away from direct sunlight to preserve the glow-in-the-dark properties and material integrity.
- Battery Care: Always remove batteries from the LED race cars if the toy will not be used for an extended period to prevent battery leakage and damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED Race Car not moving or lights not working. |
|
|
| Track pieces are not glowing brightly. |
|
|
| Track pieces are difficult to connect or disconnect. |
|
|
Safety Information
WARNING: CHOKING HAZARD - Small Parts. Not for children under 3 years. This product contains small parts which may pose a choking hazard to young children. Adult supervision is recommended during play, especially for children under the manufacturer's recommended age of 3 years.
- Do not put track pieces or car components in mouth.
- Keep batteries away from small children. If swallowed, seek immediate medical attention.
- Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Dispose of batteries responsibly according to local regulations.
Specifications
| Product Dimensions | 16.9 x 11 x 3.7 inches |
| Item Weight | 3.26 pounds |
| Model Number | CF1303 |
| Manufacturer Recommended Age | 3 years and up |
| Release Date | April 15, 2019 |
| Manufacturer | USA Toyz |
Warranty and Support
USA Toyz is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, for any questions, concerns, or support needs regarding your Glow Trax set, please contact USA Toyz customer service directly. Refer to the product packaging or the official USA Toyz website for the most current contact information.
USA Toyz Official Store: Visit the USA Toyz Store on Amazon
