Introduction
This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Yuntop 160-Piece Metal Picture Frame Turn Button Fasteners and Screws set. Please read these instructions carefully before use to ensure correct installation and optimal performance.
1. Setup
1.1. Package Contents
Verify that all components are present in your package:
- 160 x Metal Turn Button Fasteners
- 160 x Corresponding Black Screws
- 1 x Transparent Storage Case
Image 1.1: Overview of the Yuntop 160-piece set, including turn button fasteners and screws.
2. Operating Instructions
2.1. Preparing for Installation
Ensure you have the picture frame, backing board, and the artwork/photo ready. A screwdriver (preferably a Phillips head) will be required for installation.
Image 2.1: Components of the set, highlighting the compact size and ease of handling.
2.2. Step-by-Step Installation
Follow these steps to securely fasten the backing board to your picture frame:
- Position the Turn Button: Place the turn button fastener on the back plate of the photo frame, ensuring it overlaps both the frame and the backing board. The flat end of the turn button should be positioned over the backing board, and the screw hole should align with the frame's edge.
- Align the Screw: Insert one of the provided black screws through the hole in the turn button fastener.
- Tighten the Screw: Using a screwdriver, carefully tighten the screw into the frame. Ensure the screw is snug but do not overtighten, as this may damage the frame material. The turn button should pivot freely when loosened and hold the backing board firmly when tightened.
Image 2.2: An installed turn button fastener, showing how it secures the frame's backing.
3. Care and Maintenance
To ensure the longevity and proper function of your Yuntop turn button fasteners:
- Storage: Store unused fasteners and screws in the provided transparent case in a dry environment to prevent moisture exposure.
- Cleaning: If necessary, wipe the fasteners with a dry cloth. Avoid using harsh chemicals or abrasive materials.
- Rust Prevention: The fasteners are treated with an anti-rust oil. A slight initial odor is normal and will dissipate.
Image 3.1: The transparent storage case, designed for convenient organization and protection of the fasteners.
4. Troubleshooting
- Fastener Not Holding Securely: Ensure the screw is fully tightened. Check that the turn button is correctly positioned to overlap both the frame and the backing board.
- Difficulty Turning Fastener: If the fastener is too tight to turn, slightly loosen the screw. Ensure the screw is not overtightened into the frame material.
- Initial Odor: A slight odor may be present upon opening due to the anti-rust oil applied during manufacturing. This is normal and will dissipate over time.
5. Product Specifications
| Feature | Detail |
|---|---|
| Material | Iron |
| Brand | yuntop |
| Color | Black |
| Item Weight | 0.12 Kilograms (total set) |
| Installation Type | Screw-In |
Image 5.1: Detailed dimensions of the turn button fasteners and screws for reference.
6. Warranty and Support Information
For any questions, concerns, or support regarding your Yuntop 160-Piece Metal Picture Frame Turn Button Fasteners and Screws, please refer to the seller's contact information provided at the point of purchase. Yuntop is committed to providing quality products and customer satisfaction.