Moman VBP

Download PDF
Contents

MOMAN VBP V-Mount Battery Plate

User Instruction Manual

Model: VBP

1. Introduction

Thank you for purchasing the MOMAN VBP V-Mount Battery Plate. This device is designed to provide versatile power distribution for your camera rig, allowing you to power multiple accessories simultaneously from a single V-mount battery. It features various DC and USB output ports, along with a 15mm rod clamp for easy integration into your setup.

Please read this manual carefully before using the product to ensure safe and optimal operation. Keep this manual for future reference.

2. Safety Instructions

  • Do not expose the device to rain, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Do not attempt to disassemble or modify the device. Repairs should only be performed by authorized personnel.
  • Ensure that the voltage and current requirements of your connected devices match the output specifications of the VBP plate to prevent damage.
  • Always disconnect power before cleaning or when the device is not in use.
  • Keep out of reach of children.

3. Package Contents

Please check that all items are present in your package:

  • MOMAN VBP V-Mount Battery Plate x1
  • Coiled DC Cable (5.5*2.5mm to 5.5*2.5mm) x1
  • DC Cable (5.5*2.5mm to 5.5*2.5mm) x1
  • DC Cable (5.5*2.5mm to 5.5*2.5mm) x1
  • DC Cable (5.5*2.5mm to 4.0*1.7mm) x1
  • LP-E6 Dummy Battery Adapter x1
MOMAN VBP Package Contents

Figure 3.1: Package Contents. This image displays the MOMAN VBP V-Mount Battery Plate along with all included cables: one coiled DC cable, three straight DC cables of varying sizes, and one LP-E6 dummy battery adapter.

4. Product Overview

The MOMAN VBP plate provides multiple power output options for various camera accessories.

MOMAN VBP Multi-Output Ports Diagram

Figure 4.1: Multi-Output Ports. This diagram highlights the various output ports on the MOMAN VBP plate. On the top side, it shows two USB ports and the main power switch. On the bottom side, it indicates the D-Tap output, 5V output, 8V output, 12V output, and 15V output ports.

4.1. Port Descriptions

  • D-Tap Output: 14.8V DC, suitable for devices like Blackmagic Design Pocket Cinema Camera 4K/6K.
  • 15V DC Output: Suitable for devices like Blackmagic Design Pocket Cinema Camera 4K/6K.
  • 12V DC Output: Ideal for camera monitors and other 12V accessories.
  • 8V DC Output: Compatible with Canon cameras such as 6D, 7D, 60D, 70D, 5D MarkII.
  • 5V DC Output: For various 5V devices, recorders, and smartphones.
  • USB Ports (x2): 5V output for charging smartphones, tablets, and other USB-powered devices.
  • Power Switch: Controls the main power to all outputs.
  • V-Mount Lock: Securely attaches V-mount batteries.
  • 15mm Rod Clamp: For mounting the plate onto standard 15mm camera rods.

5. Setup

5.1. Attaching to 15mm Rods

  1. Loosen the blue locking knob on the 15mm rod clamp.
  2. Slide the clamp onto your camera's 15mm rod system.
  3. Tighten the blue locking knob until the plate is securely fastened and does not move.

5.2. Mounting a V-Mount Battery

  1. Align the V-mount battery with the V-mount receiver on the plate.
  2. Slide the battery downwards until it clicks into place, indicating it is securely locked.
  3. To remove, press the release button (if present on your battery or the plate's V-mount mechanism) and slide the battery upwards.

5.3. Connecting Devices

  1. Identify the correct voltage and connector type for each device you wish to power.
  2. Use the appropriate DC cables or USB cables to connect your devices to the corresponding output ports on the VBP plate.
  3. For Canon cameras requiring an LP-E6 battery, connect the provided LP-E6 dummy battery adapter to an 8V DC output port on the VBP plate, then insert the dummy battery into your camera's battery compartment.
LP-E6 Dummy Battery Connection

Figure 5.1: LP-E6 Dummy Battery Connection. This image illustrates the LP-E6 dummy battery adapter and its connection to a Canon camera. It also shows the coiled DC cable, which can be used to connect the dummy battery to the VBP plate's 8V output.

6. Operating Instructions

6.1. Powering On/Off

  1. After connecting your V-mount battery and all desired accessories, press the main power switch on the VBP plate to the 'ON' position.
  2. To power off, press the switch to the 'OFF' position.

6.2. Device Compatibility

The MOMAN VBP plate offers wide compatibility with various camera systems and accessories:

  • Blackmagic Design: Pocket Cinema Camera 4K/6K (via D-Tap or 15V output).
  • Canon: EOS 5D Mark II, 5D Mark III, 5D Mark IV, 6D, 6D Mark II, 7D, 7D Mark II, 70D, 80D, 5DSR, 60D, 60Da, 5DS, 5DS R (via 8V output with LP-E6 dummy battery).
  • Sony: Alpha a7, a7R, a7S, a7 II, a7S II, a7R II, a6500, a6300, a5100, a5000, a3000, NEX-5, NEX-7, DSC-RX10 (check specific camera power input requirements).
  • Other Devices: Camera monitors, video lights, audio recorders, smartphones, and other USB-powered devices.
Wide Device Compatibility

Figure 6.1: Wide Device Compatibility. This image displays various camera models from Canon, Sony, and Blackmagic, illustrating the broad range of devices compatible with the MOMAN VBP V-Mount Battery Plate.

Powering Multiple Devices

Figure 6.2: Powering Multiple Devices. This image shows the MOMAN VBP plate mounted on a camera rig, simultaneously powering a DSLR camera, a monitor, a smartphone, and an LED video light, demonstrating its multi-device power supply capability.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the device. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspection: Periodically check cables and connectors for any signs of wear or damage. Replace damaged components immediately.

8. Troubleshooting

ProblemPossible CauseSolution
No power output1. Power switch is OFF.
2. V-mount battery is not properly connected or discharged.
3. Cable connection is loose or faulty.
1. Turn the power switch ON.
2. Ensure battery is securely mounted and charged.
3. Check all cable connections; try a different cable.
Device not powering on1. Incorrect voltage output selected.
2. Device is incompatible or faulty.
1. Verify the device's voltage requirement and connect to the correct port.
2. Test the device with another power source; consult device manual.
Loose connection on 15mm rodsLocking knob is not tightened sufficiently.Tighten the blue locking knob firmly.

9. Specifications

FeatureSpecification
ModelVBP
BrandMoman
InputV-Mount Battery (14.8V nominal)
Output Ports1x D-Tap (14.8V)
1x DC 15V
1x DC 12V
1x DC 8V
1x DC 5V
2x USB 5V
Mounting15mm Rod Clamp
ColorBlack
WeightApprox. 0.6 kg

10. Warranty and Support

Moman products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your purchase or visit the official Moman website.

If you encounter any issues or have questions regarding your MOMAN VBP V-Mount Battery Plate, please contact Moman customer service for assistance.

© 2023 Moman. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.