1. Introduction
The MagTool N170 Plus In-Sump DC Protein Skimmer is designed to efficiently remove organic waste from marine aquariums, contributing to a cleaner and healthier reef environment. This manual provides essential information for the proper installation, operation, and maintenance of your protein skimmer.
2. Product Overview
The MagTool N170 Plus utilizes foam fractionation to remove dissolved organic compounds before they degrade into harmful substances. Key features include:
- Silent DC Sine Wave Pump: Equipped with a controllable DC sine wave pump and a specialized needle wheel impeller for optimal air-water mixing and bubble production. The pump operates quietly and features 1-8 speed levels, a feed mode, and a delay start function.
- Superior Design: Features a Cell-Cast diffuser and a hybrid cone structure to optimize air-water mixing, reduce turbulence, and promote stable laminar flow within the reaction chamber. This design enhances skimming efficiency and allows for smooth skimmate collection.
- Anti-Overflow Protection: The collection cup includes a built-in overflow sensor that monitors water levels. If the cup becomes full, the system automatically stops the pump, emits an alarm, and then resumes operation at the lowest power level to prevent waste re-entry into the aquarium.
- Compact Footprint: Designed for sumps with limited space, featuring a bottom-open outlet design. Suitable for aquariums up to 135 gallons (high bio-load) or 185 gallons (low bio-load). Recommended water depth for operation is 7.0–8.7 inches.

3. Setup Instructions
Follow these steps for proper assembly and installation of your MagTool N170 Plus Protein Skimmer:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the product diagram are present and undamaged.
- Assemble the Skimmer Body: Connect the main body sections according to the provided diagram. Ensure all O-rings and seals are correctly seated to prevent leaks.
- Install the Pump: Securely attach the DC sine wave pump to the skimmer base. Ensure the needle wheel impeller is properly installed within the pump housing.
- Connect Air Intake and Water Outlet: Attach the air intake silencer and tubing to the pump. Connect the water outlet pipe and the adjustable valve.
- Position in Sump: Place the assembled skimmer into your aquarium sump. Ensure the water level in the sump is within the recommended range of 7.0–8.7 inches for optimal performance.
- Connect Controller and Power: Connect the pump and overflow sensor cables to the smart controller. Then, connect the power adapter to the controller and plug it into a power outlet.

4. Operating Instructions
Once installed, operate your skimmer using the smart controller:
- Power On: After connecting the power, the skimmer will initiate.
- Adjust Pump Speed: Use the buttons on the smart controller to adjust the pump speed from level 1 to 8. Start with a lower setting and gradually increase to achieve desired foam production.
- Adjust Water Level: Use the red adjustable valve on the water outlet to fine-tune the internal water level within the skimmer body. Adjust until the foam head is stable and rises to the desired height in the collection cup neck.
- Feed Mode: Activate the feed mode on the controller to temporarily pause the skimmer during feeding times. This prevents food particles from being skimmed out. The skimmer will resume operation after a set delay.
- Anti-Overflow System: The built-in sensor in the collection cup will detect high waste levels. If the cup fills, the pump will stop, an alarm will sound, and the skimmer will restart at the lowest power setting after a 10-minute pause to prevent overflow.


5. Maintenance
Regular maintenance ensures optimal performance and longevity of your protein skimmer:
- Collection Cup Cleaning: Empty and clean the collection cup regularly (daily to weekly, depending on bio-load). Rinse with fresh water to remove accumulated skimmate.
- Neck Cleaning: Clean the skimmer neck periodically to prevent build-up that can hinder foam production.
- Pump Maintenance: Disassemble and clean the pump and impeller every 3-6 months. Remove any calcium deposits or debris that may affect performance.
- Air Intake Silencer: Check and clean the air intake silencer as needed to ensure unrestricted airflow.
6. Troubleshooting
If you encounter issues with your MagTool N170 Plus Protein Skimmer, consider the following common problems and solutions:
- No Foam Production: Check water level in sump, ensure pump is running, verify air intake is clear, and adjust pump speed and water level valve. A new skimmer may require a break-in period of several days.
- Excessive Microbubbles: Ensure the skimmer is properly seated and not drawing air from external sources. Adjust the water level valve to lower the internal water level.
- Collection Cup Overflowing: Check the overflow sensor for obstructions. Ensure the water level in the sump is stable and within the recommended range. Reduce pump speed if necessary.
- Unusual Noise: Inspect the pump impeller for debris or damage. Ensure all connections are secure and the skimmer is not vibrating against the sump walls.
7. Specifications
Detailed specifications for the MagTool N170 Plus Protein Skimmer:

| Feature | Detail |
|---|---|
| Model | N170 Plus |
| Item Model Number | HF-N100Plus-EU |
| Aquarium Capacity (Low Bio-Load) | Up to 185 Gallons |
| Aquarium Capacity (High Bio-Load) | Up to 135 Gallons |
| Recommended Water Depth | 7.0–8.7 inches |
| Footprint | 9.0 × 8.2 inches (L × W) |
| Pump Type | Controllable DC Sine Wave Pinwheel Pump |
| Pump Power | 25 Watts |
| Max. Flowrate (Water + Air) | 660 GPH (420 GPH Water + 140 GPH Air) |
| Material | Plastic |
| Item Weight | 9.83 pounds (4.46 kg) |
| Power Source | Corded Electric |
| Operation Mode | Automatic |

8. Warranty & Support
MagTool is committed to providing high-performance protein skimmers and excellent customer service. While specific warranty details are not provided in this manual, our customer support team is available 24/7 to assist with any issues or questions you may have regarding your product. Please contact us for prompt assistance to ensure a worry-free aquarium keeping experience.