1. Introduction
The MagTool N100 Plus In-Sump DC Protein Skimmer is designed for efficient filtration in reef aquarium tanks ranging from 50 to 100 gallons. This compact unit features a controllable DC pinwheel pump and an anti-overflow design to help maintain optimal water quality by removing organic waste before it breaks down. Its innovative design ensures powerful performance with quiet operation, making it suitable for space-limited installations.
2. Safety Information
- Always disconnect the power supply to the skimmer and any other aquarium equipment before performing maintenance, cleaning, or assembly.
- Ensure the skimmer is placed in a stable position within the sump and that the recommended water level is maintained.
- Do not operate the pump dry. Ensure the pump is fully submerged in water before connecting to power.
- Keep all electrical connections dry and away from water.
- This product is intended for indoor use only in an aquarium environment.
3. Package Contents
Please verify that all components are present and undamaged upon unboxing.
- Skimmer Body (Reaction Chamber)
- Collection Cup with Lid
- DC Pinwheel Pump
- Air Intake Silencer
- Water Level Adjustment Pipe
- Output Valve
- Power Adapter and Controller
- Mounting Screws/Hardware


4. Setup Instructions
- Assembly: Refer to the exploded view (Figure 1) for component identification. Assemble the skimmer body, ensuring all O-rings and seals are correctly seated. Attach the DC pinwheel pump to the base of the skimmer. Secure the collection cup to the top of the reaction chamber.
- Connect Air Intake: Connect the air intake silencer to the pump's air inlet.
- Install Water Level Adjustment: Insert the water level adjustment pipe and attach the output valve.
- Placement in Sump: Place the assembled skimmer into your aquarium sump. Ensure the skimmer is positioned in a chamber with a stable water level.
- Recommended Water Level: The optimal operating water level for the N100 Plus is between 6.5 to 7.5 inches. Adjust the skimmer's position or the sump's water level as needed to meet this requirement.
- Power Connection: Connect the DC pump to the provided controller, and then connect the controller to the power adapter. Finally, plug the power adapter into a suitable electrical outlet.
- Initial Break-in: Allow a break-in period of several days for the skimmer to achieve optimal performance. During this time, foam production may be inconsistent.

Setup Videos
Video 1: This video demonstrates the unboxing and setup process for the MagTool Protein Skimmer, guiding users through assembly and initial installation steps.
Video 2: This video provides a detailed guide on building and installing the MagTool Skimmer in a 75-gallon sump, offering practical tips for placement and connection.
5. Operating Instructions
- Power On: Once assembled and placed in the sump with the correct water level, connect the power. The pump will start operating.
- Adjusting Water Level: Use the water level adjustment pipe and output valve to control the internal water level within the skimmer. For drier skimmate (darker, thicker), lower the water level. For wetter skimmate (lighter, more watery), raise the water level. Fine-tune this adjustment over several days to achieve desired foam consistency.
- Pump Speed Control: The N100 Plus features a controllable DC pump. Use the speed control knob on the controller to adjust the pump's power. Higher speeds generally produce more foam. Start at a medium setting and adjust as needed.
- Anti-Overflow Design: The skimmer is equipped with an anti-overflow design. In case of excessive foam production or a blockage, the system is designed to prevent the collection cup from overflowing into your sump.

Operation Videos
Video 3: This video showcases the MagTool Aquarium in-Sump DC Protein Skimmer in operation, highlighting its controllable DC pinwheel pump for 50-100 gallon tanks.
Video 4: A demonstration of the Aquarium in-Sump DC Protein Skimmer, focusing on its controllable DC pinwheel pump and overall functionality.
6. Maintenance
Regular maintenance is crucial for the optimal performance and longevity of your protein skimmer.
- Collection Cup Cleaning: Empty and clean the collection cup regularly, typically every few days or as needed, depending on the amount of skimmate produced. Rinse with fresh water to remove accumulated organic waste.
- Neck Cleaning: Clean the skimmer neck (where the collection cup attaches) to prevent organic buildup that can hinder foam production. Use a brush or cloth to remove any slime.
- Pump and Impeller Cleaning: Periodically (e.g., monthly or bi-monthly), disassemble the pump and clean the impeller. Remove any debris, calcium buildup, or algae that may impede its operation. Use a soft brush and vinegar solution for stubborn deposits.
- Full Disassembly and Cleaning: For a thorough cleaning, the entire skimmer can be disassembled. Soak components in a vinegar solution to remove mineral deposits, then rinse thoroughly with fresh water before reassembly.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No foam or poor foam production |
|
|
| Skimmer overflowing |
|
|
| Excessive noise or vibration |
|
|
8. Specifications
| Feature | Detail (N100 Plus) |
|---|---|
| Model Number | HF-N100Plus-EU |
| Footprint | 5.0 x 4.3 inches (12.7 x 10.9 cm) |
| Height | 16.34 inches (41.5 cm) |
| Recommended Water Level | 6.5 - 7.5 inches |
| Pump Power Consumption | 7 Watts (DC24V) |
| Max. Flowrate (Water + Air) | 265 GPH (180 GPH Water + 80 GPH Air) |
| Gallon Rating (Light Bio-Load) | Up to 100 gallons |
| Gallon Rating (Medium Bio-Load) | ~75 gallons |
| Gallon Rating (Heavy Bio-Load) | Up to 50 gallons |
| Material | Metal, Plastic |
| Item Weight | 3.57 Pounds (1.62 Kilograms) |


9. Warranty and Support
For warranty information, technical support, or replacement parts, please contact MagTool customer service directly. Refer to the product packaging or the official MagTool website for the most current contact details.