Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your Patriot Lighting Gilda II 19" Integrated LED Flush Mount Ceiling Light. Please read these instructions thoroughly before beginning installation or use to ensure proper function and safety.
Image: The Patriot Lighting Gilda II 19-inch Oil-Rubbed Bronze Integrated LED Flush Mount Ceiling Light, showcasing its design and finish.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation, servicing, or cleaning.
- Consult a qualified electrician if you are unsure about the installation process or have any electrical questions.
- Do not modify the fixture or attempt to repair it. Refer all servicing to qualified personnel.
- Ensure all electrical connections are secure and comply with local electrical codes.
- This fixture is designed for indoor use only. Do not expose to water or excessive moisture.
Package Contents
Verify that all components are present before beginning installation:
- 1 x Gilda II 19" Integrated LED Flush Mount Ceiling Light
- Mounting Hardware (screws, wire nuts, mounting bracket)
- Instruction Manual
Specifications
| Feature | Detail |
|---|---|
| Brand | Patriot Lighting |
| Model Number | LFM172A19ORB-P |
| Dimensions (L x W x H) | 19" x 19" x 4.5" |
| Item Weight | 7 pounds |
| Light Source | Integrated LED |
| Wattage | 34 watts |
| Brightness | 2650 lumens |
| Color Temperature | 3000 Kelvin (White Light) |
| Voltage | 120 volts |
| Dimmable | Yes (compatible dimmer required) |
| Control Method | Remote Control |
| Material | Bronze (Fixture), Acrylic (Shade) |
| Finish | Oil Rubbed Bronze |
| Life Expectancy | 50,000 hours |
| Indoor/Outdoor Usage | Indoor |
| Installation Type | Flush Mount |
Setup and Installation
Follow these steps to properly install your ceiling light fixture:
- Turn Off Power: Before starting, ensure the power to the junction box is completely turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Remove any existing fixture and its mounting bracket. Install the new mounting bracket (included) to the junction box using the provided screws.
- Connect Wires: Carefully connect the electrical wires. Connect the black wire from the fixture to the black wire from the junction box, the white wire from the fixture to the white wire from the junction box, and the ground wire from the fixture to the ground wire from the junction box. Secure connections with wire nuts.
- Secure Fixture: Carefully tuck the wires into the junction box. Align the fixture with the mounting bracket and secure it in place using the provided screws.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Image: A visual representation of a flush mount light installation, illustrating the process of attaching the fixture to the ceiling junction box.
Operating Instructions
After successful installation and power restoration, your Patriot Lighting Gilda II fixture is ready for use.
- Power On/Off: Operate the light using your standard wall switch.
- Dimming Function: This fixture features an integrated dimmable LED. To adjust the light brightness, ensure you have a compatible dimmer switch installed on your wall.
- Remote Control: Use the provided remote control to turn the light on or off and to adjust the brightness levels. Point the remote directly at the fixture for optimal response.
Maintenance
Proper care will ensure the longevity and appearance of your light fixture.
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic lens.
- LED Care: The integrated LED light source is designed for a long life of approximately 50,000 hours and does not require bulb replacement.
- Lens: The non-yellowing lens ensures consistent light quality over time.
Troubleshooting
If you encounter issues with your light fixture, refer to the following common problems and solutions:
- Light does not turn on:
- Check that the power supply to the fixture is on at the circuit breaker.
- Ensure all wiring connections are secure and correct.
- Verify the wall switch is in the 'ON' position.
- Light flickers or dims unexpectedly:
- Confirm all wiring connections are tight.
- If using a dimmer, ensure it is compatible with LED fixtures. Incompatible dimmers can cause flickering.
- Remote control not working:
- Check the battery in the remote control and replace if necessary.
- Ensure there is a clear line of sight between the remote and the light fixture.
If these steps do not resolve the issue, please contact customer support.
Warranty and Support
For warranty information, technical assistance, or to inquire about replacement parts, please contact Patriot Lighting customer service. Keep your purchase receipt as proof of purchase.
Visit the Patriot Lighting Store for more products and information.