1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Gillen 4-Blade LED Ceiling Fan. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Gillen 56-inch Ceiling Fan features a matte black motor housing, rustic charcoal blades, and a clear glass globe shade. It includes an integrated LED light kit and is controlled by a 6-speed full-function remote with dimming capabilities. This fan is designed for indoor use only.
Figure 1: Progress Lighting Gillen Ceiling Fan
2. Important Safety Information
WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these guidelines:
- Always disconnect power at the main fuse or circuit breaker before installation, cleaning, or servicing.
- Consult a qualified electrician if you are unsure about wiring or installation procedures.
- Ensure all electrical connections are made in accordance with local codes and ordinances.
- The fan must be mounted to a structurally sound ceiling joist or an outlet box marked "Acceptable for Fan Support of 35 lbs (15.9 kg) or less."
- Keep hands, clothing, and other objects clear of the fan blades when the fan is operating.
- This product is for indoor use only. Despite some product descriptions, the official specifications confirm it is cULus Dry Location Listed and intended for indoor environments.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, contact Progress Lighting customer service before proceeding with installation.
- Ceiling Fan Assembly (Motor Housing, Downrod, Canopy)
- Fan Blades (4)
- Light Kit Assembly (Clear Glass Shade, LED Bulb)
- Remote Control with Batteries
- Mounting Hardware (Screws, Washers, Wire Nuts, etc.)
- Instruction Sheet
Figure 2: Example of Installation Manual Cover
4. Setup and Installation
Installation should be performed by a qualified individual. Refer to the included instruction sheet for detailed diagrams and step-by-step guidance.
4.1 Pre-Installation
- Turn off power at the circuit breaker or fuse box.
- Ensure the mounting location can support the fan's weight (approximately 19.56 lbs).
- The canopy is designed to cover a standard 4-inch recessed outlet box (6.625 inches W x 2.25 inches Ht x 6.625 inches D).
4.2 Mounting the Fan
- Attach the mounting bracket to the ceiling outlet box using the provided hardware.
- Secure the downrod to the motor housing.
- Lift the fan assembly and hang it from the mounting bracket.
4.3 Wiring
Connect the fan's electrical wires to the household wiring according to the wiring diagram in the instruction sheet. Use the supplied wire nuts. Approximately 80 inches of wire are supplied for connections.
4.4 Blade and Light Kit Installation
- Attach the fan blades to the motor housing using the provided screws.
- Install the LED bulb into the light kit socket.
- Secure the clear glass shade to the light kit.
Figure 3: Fan Blades and Light Kit Detail
Figure 4: Fan Motor Housing and Light Fixture
5. Operating Instructions
Your Gillen ceiling fan is operated using the included AirPro 6-speed full-function remote control.
5.1 Remote Control Functions
Figure 5: AirPro Remote Control
- Fan Speed Control: The remote features buttons (I, II, III, IV, V, VI) to select one of six fan speeds. Press the center button to turn the fan off.
- Light On/Off: Press the light bulb icon button to turn the light on or off.
- Light Dimming: Hold down the light bulb icon button to adjust the brightness of the LED light. The light is dimmable to 10% brightness with Triac/Forward phase dimmers.
- Fan Direction: The remote includes a button to reverse the fan's direction for seasonal use (clockwise for downdraft in summer, counter-clockwise for updraft in winter).
5.2 Battery Installation
The remote control requires Alkaline batteries, which are included. Open the battery compartment on the back of the remote and insert the batteries, observing correct polarity.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
6.1 Cleaning
- Always turn off power to the fan before cleaning.
- Wipe the fan housing and blades with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Clean the glass shade with a mild glass cleaner and a soft cloth.
6.2 Bulb Replacement
The fan uses one 7-watt medium base LED bulb. When replacement is necessary, ensure the power is off and replace with a similar type and wattage LED bulb.
7. Troubleshooting
If you experience issues with your fan, consult the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power supply Remote control batteries dead Loose wiring connections | Check circuit breaker/fuse Replace remote batteries Verify all wiring connections are secure (power off first) |
| Light does not work | Bulb faulty or loose Incorrect remote setting Loose wiring connections | Replace bulb or tighten Ensure light is turned on via remote Check light kit wiring (power off first) |
| Excessive fan wobbling | Loose fan blades Unbalanced blades Loose mounting hardware | Ensure all blade screws are tight Use a blade balancing kit (not included) Tighten mounting bracket screws (power off first) |
| Remote not responding | Dead batteries Interference Remote not paired (if applicable) | Replace batteries Move closer to fan, remove obstructions Refer to the full installation manual for pairing instructions |
8. Specifications
Detailed technical specifications for the Progress Lighting Gillen P250075-31M-WB Ceiling Fan.
| Feature | Detail |
|---|---|
| Brand | Progress Lighting |
| Model Name | Gillen |
| Model Number | P250075-31M-WB |
| Color | Matte Black |
| Fan Design | Ceiling Fan |
| Power Source | AC |
| Room Type | Bedroom, Living Room |
| Special Feature | Remote Controlled |
| Wattage (Light) | 7 Watts (LED) |
| Finish Type | Finished |
| Voltage | 120 Volts |
| Included Components | Instruction sheet and hardware |
| Indoor/Outdoor Usage | Indoor Only |
| Control Method | Remote |
| Number of Power Levels | 6 |
| Item Weight | 19.56 pounds |
| Product Dimensions | 56 x 56 x 21.65 inches |
| Type of Bulb | LED |
| Plug Format | A- US style |
| Batteries Included? | Yes |
| Battery Cell Type | Alkaline |
| CCT (Correlated Color Temperature) | 2700 Kelvin |
| CRI (Color Rendering Index) | 80 CRI |
| Life (hours) | 15000 (L70/TM-21) |
| Certifications | cULus Dry Location Listed, Title 20 JA8 rated |
| UPC | 785247264889 |
Figure 6: Product Dimensions
Figure 7: Product Data Sheet and EnergyGuide
9. Warranty and Support
9.1 Warranty Information
The Progress Lighting Gillen P250075-31M-WB Ceiling Fan comes with a Limited Lifetime Warranty. Please refer to the warranty documentation included with your purchase or visit the official Progress Lighting website for full terms and conditions.
9.2 Customer Support
For technical assistance, replacement parts, or any questions regarding your Progress Lighting product, please contact customer support:
- Website: Visit the official Progress Lighting Store on Amazon or their corporate website for support resources and contact information.
- Phone: Refer to the contact details provided in your product packaging or on the official website.
