Juilist Centrifugal Juicer Machine User Manual

1. Introduction

Thank you for choosing the Juilist Centrifugal Juicer Machine. This powerful 800W juicer is designed to extract fresh, healthy juice from a variety of fruits and vegetables quickly and efficiently. Featuring dual speed settings, a large 3-inch feed chute, and an anti-drip function, it simplifies your juicing experience. Please read this manual thoroughly before first use to ensure safe and optimal operation.

Image: The Juilist Centrifugal Juicer Machine, showcasing its sleek design alongside fresh fruits and a pitcher of green juice.

2. Important Safety Precautions

To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:

• Read all instructions before operating the appliance.
• Ensure the safety locking arm is properly engaged before starting the juicer. The appliance will not operate if the locking arm is not in the correct position.
• Do not immerse the motor base in water or other liquids.
• Unplug the juicer from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Keep hands and utensils out of the feed chute during operation to prevent injury. Use the food pusher provided.
• The overload protection system will automatically shut down the motor if the temperature exceeds 105 degrees Celsius (221 degrees Fahrenheit). Allow the unit to cool down before resuming operation.
• Do not use the appliance for anything other than its intended use.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Product Components

Familiarize yourself with the parts of your Juilist Centrifugal Juicer:

1. Food Pusher
2. Juicer Cover
3. Filter Basket (Stainless Steel)
4. Strainer Bowl
5. Motor Base with Control Dial
6. Safety Locking Arm
7. Pulp Container
8. Juice Jug (1100ml/37oz) with Foam Separator
9. Cleaning Brush

Image: An exploded view diagram illustrating all the individual components of the Juilist Centrifugal Juicer.

4. Setup and Assembly

Follow these steps to assemble your juicer before use:

1. Install the strainer bowl on top of the motor base.
2. Place the filter basket into the strainer bowl, pushing down until it clicks into place.
3. Install the pulp container by sliding it onto the back of the motor base.
4. Place the juicer cover over the strainer bowl, ensuring the feed chute is positioned over the filter basket.
5. Raise the safety locking arm up and locate it into the two grooves on either side of the juicer cover. Ensure it is securely locked.
6. Slide the froth separator into the juice jug along the neck, then place the jug under the juice spout.
7. Insert the food pusher into the feed chute.

For a visual guide on assembly, please watch the official product video:

5. Operating Instructions

5.1. Fruit and Vegetable Preparation

• Wash all fruits and vegetables thoroughly.
• For fruits with thick peels (e.g., oranges, pineapples), remove the peel before juicing.
• Remove large seeds or pits from fruits (e.g., peaches, cherries).
• Cut larger fruits and vegetables into pieces that fit easily into the 3-inch feed chute.
• Do not use frozen fruits or vegetables.

5.2. Juicing Process

1. Ensure the juicer is properly assembled and the juice jug is in place.
2. Plug the power cord into a grounded electrical outlet.
3. Select the desired speed setting using the control dial:
   • Speed "I" (13000-17000 RPM): Suitable for soft fruits and vegetables such as oranges, grapes, tomatoes, and berries.
   • Speed "II" (17000-21000 RPM): Ideal for hard fruits and vegetables like apples, carrots, celery, and cucumbers.
4. Turn the juicer ON.
5. Gradually feed prepared fruits or vegetables into the feed chute using the food pusher. Apply gentle, even pressure. Do not force ingredients down.
6. The fresh juice will flow into the juice jug, and the pulp will collect in the pulp container.
7. Once juicing is complete, turn the control dial to "0" (OFF) and unplug the appliance.

Image: A visual guide to the two-speed mode, indicating which fruits and vegetables are suitable for soft (Speed I) and hard (Speed II) settings.

5.3. Anti-Drip Function

The juicer is equipped with an anti-drip spout. After juicing, you can rotate the spout upwards to prevent any remaining drips from spilling onto your countertop, helping to maintain a clean kitchen.

Image: Close-up view highlighting the safety locking arm, non-slip suction feet, and the anti-drip spout of the Juilist Juicer.

6. Cleaning and Maintenance

Regular cleaning ensures the longevity and optimal performance of your juicer. It is highly recommended to clean the juicer immediately after each use to prevent pulp from drying and sticking.

1. Unplug the juicer from the power outlet.
2. Disassemble all removable parts: food pusher, juicer cover, filter basket, strainer bowl, pulp container, and juice jug.
3. Rinse all removable parts under running water. Use the included cleaning brush to remove any pulp residue from the filter basket's fine mesh.
4. All disassembled parts are dishwasher safe. However, to prolong their lifespan, avoid washing them in water hotter than 80 degrees Celsius (176 degrees Fahrenheit). Hand washing is recommended for best care.
5. Wipe the motor base with a damp cloth. Never immerse the motor base in water or any other liquid.
6. Allow all parts to dry completely before reassembling or storing the juicer.

Image: A visual demonstration of how easily the Juilist Juicer's components can be cleaned under running water and are dishwasher safe.

7. Troubleshooting

If you encounter any issues with your Juilist Centrifugal Juicer, please refer to the following common problems and solutions:

• Juicer does not start: Ensure the safety locking arm is securely in place. The juicer has a safety mechanism that prevents operation if not properly assembled. Check if the power cord is firmly plugged into a working outlet.
• Low juice yield: The juice content varies by fruit and vegetable type. Ensure you are using fresh produce with high juice content. For optimal results, consult the instruction manual for recommended produce types and preparation methods.
• Excessive pulp in juice: Ensure the filter basket is clean and free of blockages. The juicer's upgraded blade and three-layer mesh filter are designed for high juice yields and minimal pulp.
• Motor stops during operation: The juicer is equipped with an overload protection system. If the motor overheats (e.g., due to continuous heavy use or feeding too much produce too quickly), it will automatically shut off. Unplug the unit and allow it to cool down for at least 15-20 minutes before resuming use.
• Vibration or loud noise: Ensure all parts are correctly assembled and securely locked. Excessive vibration can occur if the filter basket is not properly seated.

For further assistance, please contact customer service.

Image: A graphic representing common customer questions and answers regarding juice yield and proper usage for product longevity.

8. Specifications

9. Warranty and Support

Juilist provides a 1-year free customer service warranty covering parts and performance for your juicer machine. We also offer lifelong technical support to assist you with any questions or issues you may encounter during the product's lifespan.

For customer service or technical support, please refer to the contact information provided with your purchase or visit the official Juilist website.