Youroke White Frost Set Instruction Manual

1. Introduction

Thank you for purchasing the Youroke White Frost Set. This bundle includes modern white milk glass pendant lights and wall lights designed to provide ample illumination and enhance the aesthetic of various indoor spaces. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read these instructions carefully before beginning installation and retain them for future reference.

2. Safety Information

WARNING: To avoid the risk of electric shock, always disconnect power at the main circuit breaker or fuse box before installation, servicing, or cleaning the fixture. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.

• Do not install this fixture in wet or damp locations. It is designed for indoor use only.
• Ensure all connections are secure and properly insulated.
• Do not exceed the maximum wattage specified for the bulb (60W).
• Handle glass components with care to prevent breakage.

3. Package Contents

Verify that all components are present and undamaged before installation. If any parts are missing or damaged, please contact Youroke customer service.

Figure 3.1: Overview of the Youroke White Frost Set components, including wall sconces and pendant lights.

• White Milk Glass Pendant Lights (Quantity: 2)
• White Milk Glass Wall Lights (Quantity: 2)
• Adjustable Rods for Pendant Lights (2 x 10-inch, 2 x 5-inch)
• Mounting Hardware (screws, wire nuts, mounting plate)
• Instruction Manual

Note: Bulbs are not included and must be purchased separately.

4. Specifications

Figure 4.1: Wall Light Dimensions and Bulb Requirement.

5. Setup and Installation

Before starting installation, ensure the power is turned off at the circuit breaker. All mounting hardware required is included in the package.

5.1. Wall Light Installation

Figure 5.1.1: Youroke Wall Lights.

1. Prepare Wiring: Turn off power at the main circuit breaker. Remove the old fixture if applicable.
2. Mounting Plate: Attach the mounting plate to the junction box using the provided screws. Ensure it is securely fastened.
3. Wire Connections: Connect the fixture's wires to the house wires using wire nuts:
   • Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box.
   • Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box.
   • Connect the ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting plate).
4. Secure Fixture: Carefully tuck the wires into the junction box. Align the fixture base with the mounting plate and secure it with the provided screws.
5. Install Shade and Bulb: Insert an E26 base bulb (not included) into the socket. Carefully attach the white milk glass shade to the fixture.
6. Orientation: The wall lights can be mounted facing either upwards or downwards, depending on your preference and desired lighting effect.

Figure 5.1.2: Wall Light Upward and Downward Mounting Options.

5.2. Pendant Light Installation

Figure 5.2.1: Youroke Pendant Lights.

1. Prepare Wiring: Turn off power at the main circuit breaker.
2. Assemble Rods: Determine the desired hanging height. The pendant light includes four rods (two 10-inch and two 5-inch) that can be combined to achieve various lengths. Thread the fixture wire through the chosen rods and the canopy.
3. Mounting Plate: Attach the mounting plate to the ceiling junction box. The 4.7-inch canopy features a durable swivel, allowing installation on vaulted or sloped ceilings.
4. Wire Connections: Connect the fixture's wires to the house wires using wire nuts (similar to wall light wiring: black to black, white to white, ground to ground).
5. Secure Canopy: Carefully push the wires into the junction box and secure the canopy to the mounting plate.
6. Install Shade and Bulb: Insert an E26 base bulb (not included) into the socket. Carefully attach the white milk glass shade to the fixture.

6. Operating Instructions

Once installed and wired correctly, the Youroke White Frost Set operates like any standard light fixture. Ensure a compatible E26 bulb (max 60W) is installed in each fixture.

• Power On: Restore power at the circuit breaker. The lights will turn on via your wall switch.
• Dimming Functionality: If you are using a dimmable E26 bulb and have installed a compatible dimmer switch (sold separately), you can adjust the light intensity by operating the dimmer switch.

7. Maintenance

Regular maintenance will help preserve the appearance and functionality of your Youroke White Frost Set.

• Cleaning: To clean the fixture, ensure power is off. Wipe the metal and glass surfaces with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Bulb Replacement: Always turn off power before replacing a bulb. Allow the old bulb to cool before removing it. Screw in the new E26 base bulb firmly but gently.

8. Troubleshooting

If your Youroke White Frost Set is not functioning as expected, please refer to the following common issues and solutions:

If the problem persists after attempting these solutions, please contact Youroke customer service for further assistance.

9. Warranty and Support

Youroke is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, we offer dedicated support for our products.

If there is any damaged part or you have questions about your Youroke White Frost Set, please do not hesitate to contact our customer service team. We aim to resolve your problem within 24 hours.

For support, please refer to the contact information provided on the product packaging or the Youroke brand store on Amazon.