Important Safety Instructions
Please read all instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Always unplug the fan from the power outlet before cleaning or performing any maintenance.
- Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel.
- Keep hands, hair, and loose clothing away from the moving parts of the fan during operation.
- Do not immerse the fan in water or other liquids.
- Ensure the fan is placed on a stable, level surface to prevent tipping.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not use the fan in wet or high-humidity environments, such as bathrooms.
- Ensure the power supply voltage matches the rating label on the fan.
Product Overview
The PELONIS Air Circulator Fan is a versatile 2-in-1 unit, easily transforming from a compact table fan to a taller pedestal fan. It features powerful cyclone action and unique airfoil blades for efficient air circulation.
Figure 1: PELONIS Air Circulator Fan in Table and Pedestal Modes
Key Features:
- 2-in-1 Design: Easily converts between a table fan and a pedestal fan.
- Cyclone Air Circulation: Maximizes indoor ventilation, circulating air up to 22 feet.
- 5 Airfoil Fan Blades: 7-inch blades designed to simulate natural wind indoors with low noise levels (as low as 35 dB).
- Year-Round Usage: Effective for circulating both cool air in summer (with AC) and warm air in winter (with heating systems).
- Customizable Comfort: Features 3 speed options, 90° oscillation, and a 75° pivoting head.
Figure 2: Illustration of Cyclone Air Circulation
Figure 3: Unique Airfoil Fan Blades for Enhanced Airflow
Setup & Assembly
The PELONIS Air Circulator Fan is designed for easy assembly and conversion between its two modes.
Assembly Steps:
- Attach Base to Pole: Align the internal threads of the base with the threaded section of the pole. Rotate the pole clockwise until it is snug and stable.
- Attach Motor to Pole: Place the motor unit onto the internal rod of the pole and tighten the nut securely.
- Attach Front Grille: Align the snaps on the front grille with the top line of the rear grille and press firmly until it clicks into place.
Figure 4: Fan Assembly Guide
Converting Between Table and Pedestal Modes:
To convert the fan, simply detach or attach the extension pole as needed. The fan head unit can be directly mounted onto the smaller base for table use, or onto the full pole for pedestal use.
Figure 5: Adjustable Height for 2-in-1 Functionality
Operating Instructions
Operate your PELONIS Air Circulator Fan using the controls located on the unit.
Power and Speed Settings:
The fan features a push-button control method with 3 speed options. Press the power button to cycle through the speeds (1, 2, 3) and to turn the fan off.
Oscillation and Tilt:
The fan offers 90° oscillation to cover a wider area and a 75° pivoting head to direct airflow precisely where needed. Adjust the tilt manually by gently moving the fan head up or down.
Figure 6: 75-Degree Pivoting Tilt and 90-Degree Oscillation
Low Noise Operation:
This fan operates with a low noise level of 35 dB, making it suitable for quiet environments like bedrooms or offices.
Figure 7: Low Noise Operation for Peaceful Environments
Maintenance & Cleaning
Regular cleaning will help maintain the fan's performance and extend its lifespan. Always unplug the fan before cleaning.
Cleaning the Fan Blades and Grille:
- Unplug the fan from the power outlet.
- Carefully detach the front grille by unlocking its clips or snaps.
- Remove the fan blades.
- Wipe the fan blades and both grilles with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used. Ensure all parts are completely dry before reassembling.
- Reassemble the fan by attaching the blades, then the front grille, ensuring it is securely fastened.
Figure 8: Cleaning the Fan Blades
General Cleaning:
Wipe the exterior surfaces of the fan with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
Troubleshooting
If your fan is not operating correctly, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power supply Fan is not plugged in Power button not pressed | Check power outlet Ensure fan is securely plugged in Press the power button to turn on |
| Weak airflow | Fan blades are dirty Fan is on a low speed setting | Clean fan blades and grilles Increase the fan speed setting |
| Unusual noise | Fan is not on a stable surface Loose parts | Place fan on a flat, stable surface Check for any loose components and secure them |
Specifications
| Feature | Specification |
|---|---|
| Brand | PELONIS |
| Model Name | PFG18L4ABB |
| Color | Black |
| Electric Fan Design | Table Fan / Pedestal Fan |
| Power Source | Corded Electric |
| Product Dimensions | 11.81"D x 11.81"W x 33.46"H |
| Noise Level | 35 dB |
| Wattage | 32 watts |
| Number of Blades | 5 |
| Air Flow Capacity | 22 Feet |
| Speed Settings | 3 RPM (3 speeds) |
| Voltage | 120V |
| Control Method | Push Button |
| Blade Material | Plastic |
| Certification | ETL Listed |
| Item Weight | 5.7 Pounds |
Warranty & Support
This PELONIS Air Circulator Fan comes with a 1-year Manufacturer’s Warranty from the date of purchase.
For warranty claims, technical support, or any questions regarding your product, please contact PELONIS customer service:
- Website: www.pelonis.com
- Email: support@pelonis.com
- Phone: Refer to your regional PELONIS support contact information.
Please have your model number (PFG18L4ABB) and proof of purchase ready when contacting support.
