1. Safety Information
Please read and understand all instructions before assembly and use of the Yorovent A-Frame Swing Stand. Failure to follow these instructions may result in serious injury.
- Maximum Weight Capacity: The swing stand is designed to support a maximum weight of 440 lbs (200 kg). Do not exceed this limit.
- Adult Supervision: Children must be supervised by an adult at all times while using the swing stand.
- Secure Installation: Always use the provided metal stakes to firmly anchor the swing stand into the ground to prevent tipping or wobbling during use.
- Clearance Area: Ensure adequate clear space around the swing stand to prevent collisions with other objects or structures.
- Regular Inspection: Before each use, inspect all components for wear, damage, or loose connections. Do not use if any part is compromised.
- Proper Grounding: Install the swing stand on a level, soft surface such such as grass or wood chips, away from concrete or asphalt.

Image: The A-frame design and metal stakes contribute to the swing stand's stability and safety. The maximum weight capacity is 440 lbs.
2. Product Overview
The Yorovent Heavy Duty A-Frame Swing Stand is a robust and weather-resistant frame designed for various types of swings. Its full metal construction and powder-coated finish ensure durability for outdoor use.
2.1 Key Features
- Heavy Duty Construction: Full metal frame with reinforced steel tubes.
- A-Frame Design: Provides enhanced stability.
- Weather Resistance: Powder-coated finish for anti-rust, water, corrosion, and abrasion resistance.
- High Capacity: Supports up to 440 lbs.
- Versatile: Compatible with saucer swings, mesh swings, swing chairs, and pull-up bars (swings not included).
- Easy Assembly: Designed for quick and straightforward setup.
2.2 Package Contents
The package includes all necessary components for assembling the swing stand:
- Powder-coated steel tubes (various sizes)
- Connection hardware (bolts, nuts, washers)
- Metal ground stakes (4 units)
- Assembly tools (wrenches, hex keys)
- Instruction manual

Image: The Yorovent A-Frame Swing Stand, shown here without an attached swing.

Image: All parts included in the package, ready for assembly.
3. Setup and Assembly
Assembly typically takes 10-15 minutes with two adults. Ensure all parts are present before beginning.
3.1 Required Tools
- Wrenches (included)
- Hex keys (included)
3.2 Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging and verify against the parts list in the manual.
- Assemble Top Bar: Connect the horizontal top bar sections using the provided connectors and secure with bolts. Ensure the swing hangers are correctly oriented.
- Attach A-Frame Legs: Connect the upper leg sections to the ends of the top bar, forming the 'A' shape. Secure with bolts.
- Install Crossbars: Attach the horizontal crossbars between the lower sections of the A-frame legs. These provide additional stability.
- Secure Lower Leg Sections: Connect the remaining lower leg sections to complete the A-frame structure.
- Tighten All Connections: Once all parts are assembled, systematically tighten all bolts and nuts using the provided tools. Do not overtighten.
- Position and Anchor: Place the assembled swing stand on a level, soft surface. Insert the four metal ground stakes through the designated holes at the base of each leg and drive them firmly into the ground.
4. Operating Instructions
The Yorovent A-Frame Swing Stand is designed to provide a secure base for various types of swings. Always ensure the swing stand is properly anchored and inspected before each use.
4.1 Attaching a Swing
- The swing stand is compatible with most saucer swings, mesh swings, swing chairs, and other standard swing attachments.
- Attach your chosen swing to the pre-installed stainless steel hoops on the top bar. Ensure the attachment mechanism is secure and rated for the intended use.
- Verify that the swing ropes or chains are free from twists and tangles.
4.2 Usage Guidelines
- Do not exceed the 440 lbs (200 kg) weight limit.
- Ensure children are supervised by an adult during use.
- Avoid excessive swinging that could cause the frame to lift or become unstable.
- Do not allow users to stand on the swing or engage in unsafe play.

Image: The swing stand provides a stable platform for various swings, suitable for family enjoyment.

Image: The swing stand offers universal compatibility with various swing types.
5. Maintenance
Regular maintenance will extend the life of your Yorovent A-Frame Swing Stand and ensure continued safe operation.
- Cleaning: Wipe down the frame with a damp cloth and mild soap as needed. Avoid abrasive cleaners.
- Inspection: Periodically check all bolts, nuts, and connections to ensure they are tight. Retighten if necessary.
- Rust Prevention: The powder-coated finish provides excellent anti-rust properties. However, inspect for any scratches or chips in the coating and touch up with rust-inhibiting paint if needed to prevent corrosion.
- Ground Stakes: Ensure ground stakes remain firmly in place. Re-secure if they become loose due to ground movement or weather.
- Storage: While designed for all-weather resistance, storing the swing stand indoors during extreme weather conditions (e.g., heavy snow, prolonged rain) can further prolong its lifespan.

Image: The powder-coated tubes and stainless steel hoops are designed for long service life and resistance to outdoor elements.
6. Troubleshooting
This section addresses common issues you might encounter with your swing stand.
- Wobbling or Instability:
- Ensure all bolts are securely tightened.
- Verify that the swing stand is placed on a level surface.
- Confirm that all four metal ground stakes are fully driven into the ground.
- Missing Parts:
- Carefully check all packaging materials. If parts are genuinely missing, contact customer support immediately.
- Difficulty Assembling:
- Review the assembly steps carefully. Ensure components are oriented correctly.
- Do not force parts together. If a part does not fit, re-check the instructions and component identification.
If you encounter issues not covered here, please refer to the Warranty & Support section for contact information.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Yorovent |
| Model Number | HS-SS01 |
| Product Dimensions (L x W x H) | 83"W x 61.5"D x 71"H |
| Top Bar Width | 65" |
| Frame Material | Metal |
| Finish Type | Powder Coated |
| Item Weight | 31.1 pounds |
| Maximum Weight Capacity | 440 lbs (200 kg) |
| UPC | 783296624005 |

Image: Key dimensions of the swing stand for planning installation space.
8. Warranty and Support
Yorovent is committed to providing quality products and excellent customer service.
- Customer Service: Your questions will be replied to within 24 hours.
- Spare Parts: We provide free spare parts replacement for any manufacturing defects.
- Returns/Exchanges: We offer excellent service, including prepaid labels for exchanges or returns of goods.
For support, please contact Yorovent customer service through the retailer's platform or the contact information provided with your purchase.