Bower 16-inch RGB LED Ring Light User Manual

1. Introduction

Thank you for choosing the Bower 16-inch RGB LED Ring Light. This versatile lighting solution is designed to enhance your photography, videography, live streaming, makeup application, and more. With its adjustable brightness, multiple color modes, and special effects, you can achieve professional-quality illumination for any creative endeavor. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your device.

1.1 What's Included

• 16-inch RGB LED Ring Light
• 62-inch Adjustable Tripod Stand
• Adjustable Phone Holder
• Wireless Remote Control
• In-line Remote Control with USB Power Cord
• User Manual

1.2 Safety Precautions

• Do not expose the device to water or excessive moisture.
• Keep away from direct sunlight and high temperatures.
• Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
• Ensure the tripod is stable on a flat surface before mounting the ring light and phone.
• Use only the provided power cable or a compatible USB power source.

2. Product Components

Familiarize yourself with the main components of your Bower Ring Light system:

Figure 2.1: Overview of the Bower 16-inch RGB LED Ring Light system, showing the ring light, adjustable tripod stand, phone holder, and wireless remote control.

• 16-inch Ring Light: The main LED light source with integrated controls.
• Tripod Stand: Extendable and collapsible stand for stable positioning.
• Phone Holder: Adjustable clip to secure most smartphones within the ring light.
• Wireless Remote: For convenient control of light modes and effects from a distance.
• In-line Remote: Integrated into the USB power cord for basic light control.

3. Setup Guide

Follow these steps to assemble your Bower Ring Light:

3.1 Assembling the Tripod

1. Unfold the tripod legs and spread them wide to ensure stability.
2. Loosen the locking collars on the tripod sections and extend the stand to your desired height. The tripod can extend up to 62 inches.
3. Tighten all locking collars securely to prevent the stand from collapsing.

Figure 3.1: The adjustable tripod stand can be extended from a compact 16 inches to a full 62 inches for various shooting heights.

3.2 Attaching the Ring Light

1. Locate the mounting screw on top of the tripod stand.
2. Align the ring light's mounting hole with the screw and gently twist the ring light clockwise until it is securely fastened.

3.3 Mounting the Phone Holder

1. Insert the flexible arm of the phone holder into the designated slot within the ring light.
2. Tighten the screw to secure the phone holder in place.
3. Adjust the flexible arm to position your smartphone centrally within the ring light. The phone clip accommodates most smartphones.

3.4 Power Connection

1. Connect the USB power cord from the ring light to a compatible USB power source (e.g., USB wall charger, power bank, computer, laptop).
2. Ensure the power source provides sufficient output for optimal performance.

Figure 3.2: The ring light can be powered by various USB sources, including computers, laptops, power banks, and USB wall chargers.

4. Operating Instructions

Your Bower Ring Light offers multiple ways to control its features:

4.1 Powering On/Off

• Press the power button on the in-line remote or the wireless remote to turn the light on or off.

4.2 Adjusting Brightness

• Use the '+' and '-' buttons on either the in-line remote or the wireless remote to increase or decrease the light intensity.

Figure 4.1: The ring light offers multiple brightness settings, is dimmable, remote controlled, and features adjustable height and head for versatile use.

4.3 Selecting Color Modes (RGB & White)

• RGB Colors: Press the 'RGB' button on the in-line remote or use the color selection buttons on the wireless remote to cycle through 9 vibrant RGB colors (Red, Green, Blue, Yellow, Violet, Cyan, Orange, Aqua, Purple).
• White Light Modes: Press the 'White' button on the in-line remote or the 'W' button on the wireless remote to switch between 3 white light modes (White, Natural, Warm).

Figure 4.2: The ring light offers a spectrum of 9 distinct RGB colors and 3 different white light modes (White, Natural, Warm) for diverse lighting needs.

4.4 Activating Special Effects

• Press the 'Effects' button on the in-line remote or the 'FX' button on the wireless remote to cycle through 16 unique special effects (e.g., Transition, Transition (Fade), Spectrum, Cycle, Swirl, Duo-Tone).

Figure 4.3: Comprehensive view of the ring light's control options, illustrating the 9 RGB colors, 16 special effects, and 3 white light modes available.

4.5 Using the Wireless Remote

• The wireless remote provides full control over power, brightness, color selection, and special effects from a distance.
• Ensure the remote's battery is functional (1 Lithium Ion battery included).

4.6 Phone Holder Usage

• Gently expand the phone clip and insert your smartphone. The clip is designed to securely hold most smartphones.
• Adjust the flexible arm to achieve the desired angle and orientation (portrait or landscape) for your phone.

5. Specifications

6. Maintenance and Care

• Cleaning: Use a soft, dry cloth to wipe the ring light and tripod. Do not use abrasive cleaners or solvents.
• Storage: When not in use, collapse the tripod and store the ring light in a cool, dry place, away from direct sunlight and dust.
• Handling: Avoid dropping or subjecting the device to strong impacts, as this may damage the internal components or LEDs.

7. Troubleshooting

8. Warranty and Support

Bower products are designed for quality and reliability. For any issues not covered in this manual, or for warranty inquiries, please contact Bower customer support. Keep your purchase receipt as proof of purchase.

For more information and support, please visit the official Bower website or contact their customer service department.

Manufacturer: S. BOWER INC.