1. Introduction
Thank you for choosing the ENEGON NP-BX1 Battery 3-Pack and Smart LCD Triple Charger. This product is designed to provide reliable and extended power for your compatible Sony cameras, ensuring you capture every important moment. This manual provides essential information for the safe and efficient use of your new battery and charger set. Please read it thoroughly before use.
2. Package Contents
The ENEGON NP-BX1 Battery 3-Pack + Smart LCD Triple Charger package includes the following items:
- 3 x ENEGON NP-BX1 1300mAh High Capacity Batteries
- 1 x Smart LCD Triple Charger
- 1 x Micro-USB Cable
Image: The ENEGON NP-BX1 Battery 3-Pack and Smart LCD Triple Charger kit, showing the three batteries and the charging unit.
3. Compatibility
The ENEGON NP-BX1 batteries and charger are fully compatible with a wide range of Sony cameras and devices that use NP-BX1 batteries, including but not limited to:
- Sony ZV-1
- Sony Cyber-shot DSC-HX50V, HX300, HX90V
- Sony Cyber-shot DSC-RX1, RX1R, RX100 (I, II, III, IV, V, VII)
- Sony Cyber-shot DSC-WX300
- Sony HDR-AS10, AS20, AS100, AS200
- Sony CX240, MV1
- Sony FDR-X3000R
- And other devices compatible with NP-BX1 batteries.
Image: A visual representation of various Sony camera models compatible with the ENEGON NP-BX1 batteries.
4. Features
- High Capacity Batteries: Each NP-BX1 battery offers 1300mAh capacity, providing extended shooting and recording times compared to standard batteries.
- Smart LCD Triple Charger: The charger features an intelligent LCD display that shows the individual charging status and battery capacity for each of the three battery slots. This allows for simultaneous and independent charging.
- Multiple Charging Options: The charger can be powered via USB/Type-C input, making it versatile for charging with wall chargers, power banks, car chargers, or laptops.
- Multi-Circuit Protection: Built-in safeguards protect against overcharge, short circuit, high temperature, and overvoltage. The charger and batteries are designed with a fireproof structure for enhanced safety.
Image: The ENEGON 3-channel LCD USB charger highlighting its safety features like temperature, over-charge, over-discharge, over-current, over-voltage, and short circuit protection.
5. Setup
- Connect the Charger: Connect the provided Micro-USB cable to the charger's input port and the other end to a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
- Power On: Once connected, the charger's LCD display will illuminate, indicating it is ready for use.
Image: The ENEGON charger connected to various power sources like a car charger, power bank, USB adapter, and laptop, illustrating its multiple charging options.
6. Operating Instructions: Charging Batteries
- Insert Batteries: Carefully insert up to three NP-BX1 batteries into the designated charging slots (CH1, CH2, CH3) on the charger. Ensure the battery contacts align correctly with the charger pins.
- Monitor Charging Status: The LCD screen will display the charging status for each inserted battery. A battery icon with increasing bars indicates charging in progress.
- Charging Complete: When a battery is fully charged, its corresponding icon on the LCD will show a full battery symbol.
- Remove Batteries: Once charging is complete, carefully remove the batteries from the charger.
Image: A four-panel image demonstrating the battery charging steps: 1) Charger ready, 2) Inserting the first battery, 3) Inserting all three batteries, 4) All batteries charging with a power bank.
7. Safety Precautions
- Do not disassemble, crush, puncture, or short-circuit the batteries or charger.
- Do not expose batteries or charger to high temperatures (above 60°C / 140°F) or direct sunlight.
- Keep batteries and charger away from water and moisture.
- Use only the provided charger or a compatible ENEGON charger for NP-BX1 batteries.
- Dispose of batteries properly according to local regulations. Do not dispose of in fire.
- Keep out of reach of children.
- If any abnormal behavior (e.g., overheating, swelling) is observed, discontinue use immediately.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the charger and battery contacts. Do not use liquid cleaners.
- Storage: Store batteries and charger in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, charge batteries to approximately 50-70% capacity.
- Regular Inspection: Periodically inspect batteries for any signs of damage, swelling, or leakage.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not powering on/LCD not displaying. | No power supply or faulty cable. | Ensure the USB cable is securely connected to both the charger and a working power source. Try a different USB cable or power adapter. |
| Battery not charging. | Battery not inserted correctly; dirty contacts; faulty battery. | Re-insert the battery, ensuring proper alignment. Clean battery and charger contacts with a dry cloth. Try charging a different battery to isolate the issue. |
| Charger or battery overheating. | Environmental factors; internal fault. | Disconnect immediately. Ensure charging in a well-ventilated area. If overheating persists, discontinue use and contact customer service. |
10. Specifications
- Battery Type: Lithium-ion
- Battery Capacity: 1300mAh
- Battery Voltage: 3.7V
- Charger Input: Micro-USB / Type-C (cable included is Micro-USB)
- Charger Output: 3 x NP-BX1 battery slots
- Product Dimensions: 5.51 x 1.57 x 3.15 inches (Charger)
- Item Weight: 6.3 ounces (Total package)
- Model Number: DE-EN-3BX1-3SC-LCD-DB-FH
11. Warranty and Support
The ENEGON NP-BX1 Battery 3-Pack + Smart LCD Triple Charger is backed by a 12-month manufacturer warranty. For any questions, technical assistance, or warranty claims, please contact our dedicated 24-hour customer service. Refer to the product packaging or the ENEGON official website for contact details.
