1. Introduction
The PeakTech 2700 is a versatile digital earth resistance tester designed for measuring earth resistance, earth voltage, and general AC/DC voltage. It is suitable for testing grounding equipment in electrical industries and telecommunication networks. This device features a dual backlit LCD for clear readings, Data Hold function, automatic power-off, and automatic zero adjustment, ensuring reliable and precise measurements.

Figure 1: PeakTech 2700 Digital Earth Resistance Tester with its clear display.
2. Safety Information
Read all safety warnings and instructions carefully before using this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- This device complies with EN 61010-1 safety standards.
- It is rated for CAT III 1000 V, ensuring safe operation in fixed installations.
- Always inspect test leads for damage (cracks, frayed insulation) before each use. Do not use damaged leads.
- Do not use the device in wet conditions or in the presence of explosive gases or dust.
- Ensure proper grounding connections are made before taking measurements, especially for earth resistance tests.
- Do not exceed the maximum input values for each measurement range.
- Replace batteries when the low battery indicator appears to ensure accurate readings.
- Do not attempt to repair or modify the device. Refer servicing to qualified personnel.
3. Product Description and Features
The PeakTech 2700 is a robust and reliable instrument for electrical professionals. Its intuitive design and comprehensive features make it ideal for various grounding system assessments.
Key Features:
- Measurement Functions: Earth Resistance (0-2000 Ω), Earth Voltage (0-200 V AC), AC/DC Voltage (up to 1000 V DC / 750 V AC).
- Display: Dual 3 ½ digit LCD with backlight for clear visibility in various lighting conditions.
- Data Hold: Freezes the displayed measurement value for convenient recording.
- Auto Power Off: Automatically shuts off after 15 minutes of inactivity to conserve battery life.
- Automatic Zero Adjustment: Ensures accurate baseline measurements.
- Safety Rating: CAT III 1000 V, TÜV/GS certified.
- Robust Design: Durable casing suitable for field use.

Figure 2: Close-up of the PeakTech 2700's dual backlit LCD, showing measurement values.
4. Package Contents
Carefully unpack the device and check for any damage. Ensure all items listed below are present:
- 1 x PeakTech 2700 Digital Earth Resistance Tester
- 1 x Carrying Bag
- 1 x Red Test Lead (approx. 15 m)
- 1 x Yellow Test Lead (approx. 10 m)
- 1 x Green Test Lead (approx. 5 m)
- 2 x Earth Spikes (Auxiliary Electrodes)
- 6 x 1.5V AAA Batteries
- 1 x User Manual (this document)

Figure 3: All components included with the PeakTech 2700, neatly arranged.
5. Setup
5.1 Battery Installation
- Ensure the device is turned off.
- Locate the battery compartment cover on the rear of the device.
- Unscrew the retaining screw(s) and remove the cover.
- Insert six (6) 1.5V AAA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Replace the battery compartment cover and secure it with the screw(s).
5.2 Connecting Test Leads
The PeakTech 2700 uses standard 4mm safety sockets for test lead connections. For earth resistance measurements, specific terminals are used:
- E Terminal (Green): For connection to the earth electrode under test.
- P Terminal (Yellow): For connection to the auxiliary potential spike (P1).
- C Terminal (Red): For connection to the auxiliary current spike (C1).
- VΩ Terminal (Red): For voltage and resistance measurements (multimeter function).
- COM Terminal (Black): Common terminal for all measurements.

Figure 4: Close-up view of the PeakTech 2700's input terminals with color-coded test leads connected.
6. Operating Instructions
6.1 Power On/Off and Range Selection
Turn the rotary switch to the desired measurement function and range to power on the device. To power off, turn the rotary switch to the