Vacutrim Cordless Beard Trimmer User Manual

1. Introduction

Thank you for choosing the Bell+Howell Vacutrim Cordless Beard Trimmer. This rechargeable electric shaver is designed for precise grooming of facial hair, including mustaches, sideburns, and beards. Its innovative built-in vacuum system collects hair clippings as you trim, ensuring a clean and mess-free experience. With 20 precise trim length settings, the Vacutrim offers versatile grooming options for various styles and lengths.

2. What's in the Box

Upon unboxing your Bell+Howell Vacutrim, please ensure all components are present:

• Vacutrim Cordless Beard Trimmer Unit
• Charging Cable (for laptop charging)
• Home Adapter (for electrical socket charging)
• Cleaning Brush
• Lubricating Oil
• User Manual (this document)
• 2 Comb Attachments

Figure 2.1: Bell+Howell Vacutrim product packaging.

3. Setup

3.1 Initial Charging

Before first use, fully charge your Vacutrim trimmer. The initial charge time is approximately 2.5 hours. A full charge provides up to 90 minutes of run time. The trimmer can be used while it is plugged in and charging.

3.2 Attaching Comb Attachments

The Vacutrim comes with two comb attachments that allow for 20 different trim length settings. To attach a comb, align it with the trimmer head and gently push until it clicks into place. To remove, gently pull the comb attachment away from the trimmer head.

4. Operating Instructions

4.1 Powering On/Off

To turn on the Vacutrim, press and hold the power button for approximately 3 seconds. To turn off, press and hold the power button again for 3 seconds.

4.2 Adjusting Trim Length

The Vacutrim features a calibration dial with 20 precise trim length settings. Rotate the dial to select your desired hair length. The comb attachment will adjust accordingly to provide the selected length.

4.3 Using the Built-in Vacuum

The built-in vacuum automatically activates when the trimmer is turned on. It effectively sucks in hair trimmings as you shave, storing them in an internal compartment for later disposal. This feature significantly reduces mess in your sink or grooming area.

5. Maintenance

5.1 Cleaning the Vacuum Compartment

To maintain optimal performance and hygiene, regularly clean the built-in vacuum compartment. First, ensure the trimmer is turned off. Gently remove the comb attachment and then open the vacuum compartment (refer to the diagram in the included user manual for exact location). Empty the collected hair clippings. Use the provided cleaning brush to remove any remaining hair or debris from the compartment and around the blades.

5.2 Oiling the Blades

For smooth operation and longevity of the blades, it is recommended to oil them at least once a month. With the trimmer turned off, apply a few drops of the provided lubricating oil onto the blades. Turn the trimmer on for about 15-30 seconds to allow the oil to distribute evenly. After oiling, wipe off any excess oil with a soft cloth or tissue.

6. Troubleshooting

• Trimmer not turning on: Ensure the trimmer is fully charged. If it still doesn't turn on, try plugging it in and using it while connected to power.
• Reduced trimming performance: The blades might be dull or clogged with hair. Clean the blades and vacuum compartment thoroughly. Apply lubricating oil as per maintenance instructions. If performance does not improve, consider replacing the blades (contact customer support for replacement parts).
• Vacuum not collecting hair effectively: The vacuum compartment might be full or clogged. Empty and clean the compartment as described in the maintenance section.
• Overheating: While designed to prevent overheating, prolonged continuous use or a clogged motor might cause warmth. Turn off the trimmer and allow it to cool down. Ensure all vents are clear of debris.

7. Specifications

8. Safety Information

• Keep the trimmer away from water sources.
• Do not use on infants or children.
• Be cautious when handling the blades.
• Do not attempt to disassemble or repair the unit yourself. Contact qualified personnel for service.

9. Warranty and Support

For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official Bell+Howell website. Keep your purchase receipt for warranty claims.