Bitty Boomers BITTYRVADER
Contents
Bitty Boomers Star Wars: Darth Vader Mini Bluetooth Speaker User Manual
Model: BITTYRVADER
1. Introduction
Thank you for choosing the Bitty Boomers Star Wars: Darth Vader Mini Bluetooth Speaker. This ultra-portable speaker delivers powerful sound in a compact design, allowing you to enjoy your music anywhere. This manual provides essential information for the safe and efficient use of your device.

Image 1.1: Front view of the Darth Vader Mini Bluetooth Speaker. The speaker is shaped like Darth Vader's helmet, holding a red lightsaber.
2. What's in the Box
- Bitty Boomers Star Wars: Darth Vader Mini Bluetooth Speaker
- Micro USB Charging Cable
- Lanyard/Strap
3. Product Overview
The Bitty Boomers speaker features a single multi-function button for power and Bluetooth pairing, and a micro USB port for charging.

Image 3.1: Side view of the Darth Vader Mini Bluetooth Speaker, showing its compact, rounded profile.
4. Setup
4.1 Charging the Speaker
- Locate the Micro USB port on the back of the speaker.
- Connect the small end of the included Micro USB cable to the speaker's charging port.
- Connect the larger USB end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The LED indicator (if present, typically near the charging port) will illuminate during charging and turn off or change color when fully charged.
- A full charge typically takes 1-2 hours and provides over 4 hours of music playback.

Image 4.1: Back view of the Darth Vader Mini Bluetooth Speaker, highlighting the Micro USB charging port at the bottom.
4.2 Powering On/Off
- To Power On: Press and hold the multi-function button (usually located on the base or back of the speaker) for approximately 2-3 seconds until you hear an audible tone or see the LED indicator light up.
- To Power Off: Press and hold the multi-function button again for approximately 3-4 seconds until you hear an audible tone or the LED indicator turns off.
4.3 Bluetooth Pairing
- Ensure the speaker is fully charged and powered off.
- Power on the speaker (as described in 4.2). The speaker will automatically enter pairing mode, indicated by a flashing LED light and/or an audible prompt.
- On your Bluetooth-enabled device (smartphone, tablet, computer), go to the Bluetooth settings.
- Search for available devices. You should see
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.