Product Overview
The Sena Spider RT1 is a low-profile motorcycle communication headset designed for seamless rider-to-rider communication. It operates exclusively on Sena's groundbreaking Mesh intercom platform, offering robust reliability for group communications. The device features a user-friendly three-button interface, premium HD speakers for clear audio, Bluetooth 5.1 for smartphone pairing, and Audio Multitasking capabilities.
The product packaging for the Sena Spider RT1 Dual Pack, showcasing two communication units and highlighting features like HD Speakers and Motorcycle Mesh Communication System.
Package Contents
The Sena Spider RT1 Dual Pack includes the following items:
- 2 x Sena SPIDER-RT1-01D Headsets
- Mounting hardware (clamp mounts, adhesive mounts)
- Microphones (boom and wired)
- HD Speakers
- USB Charging Cable
- User Guide
An unboxing video for the Sena 60S communication system, showcasing the various components included in the package. While for a different model, it illustrates typical Sena accessory types and packaging relevant to the Spider RT1.
Setup Guide
Installation
Proper installation of your Sena Spider RT1 is crucial for optimal performance and comfort. The device can be mounted to most motorcycle helmets using either the clamp or adhesive mount options.
A detailed video demonstrating the installation process of a Sena communication system (Sena 30K model) onto a motorcycle helmet. This video provides general guidance on mounting the unit, installing speakers, and routing microphone cables within the helmet, applicable to the Spider RT1.
- Choose Mounting Method: Decide between the clamp mount (slides between helmet shell and padding) or the adhesive mount (sticks to the helmet exterior).
- Prepare Helmet: Remove cheek pads and center liner if necessary to access speaker pockets and route cables.
- Attach Mount: Secure the chosen mount to the left side of the helmet. Ensure a snug fit.
- Install Speakers: Place the HD speakers into the helmet's speaker pockets. Use foam spacers if needed to position speakers closer to your ears for better audio.
- Install Microphone: Select the appropriate microphone (boom for open-face/modular, wired for full-face). Attach it to the mount and position it directly in front of your mouth, ensuring the wind screen is on and the correct side faces your mouth.
- Route Cables: Carefully tuck all cables into the helmet's crevices, ensuring they do not rub against your head or face.
- Reassemble Helmet: Reattach cheek pads and center liner.
- Attach Main Unit: Slide the Sena Spider RT1 main unit onto the installed mount until it clicks securely into place.
Pairing Your Device
The Sena Spider RT1 supports both Bluetooth pairing for smartphones and Mesh Intercom pairing for group communication.
Smartphone Pairing (Bluetooth 5.1)
To pair your smartphone with the Spider RT1:
- Power On: Press and hold the (+) button and the Center button for 1 second to power on the device.
- Enter Phone Pairing Mode: With the device powered on, press and hold the Center button for 10 seconds until you hear "Phone Pairing". The LED will flash red and blue.
- Connect via Phone: On your smartphone, go to Bluetooth settings and select "Sena SPIDER RT1" from the list of available devices.
- Confirmation: Once paired, you will hear "Phone Connected" from the headset.
An informational video from Sena discussing the features and operation of the SF series communication systems. This segment demonstrates phone pairing, which is applicable to the Spider RT1.
Mesh Intercom Pairing
The Spider RT1 utilizes Sena's Mesh Intercom technology for group communication. It supports Multi-Channel Open Mesh with 9 channels and virtually unlimited riders.
- Enter Mesh Intercom Mode: With the device powered on, tap the Mesh Intercom button (the large button on the side) once. You will hear "Mesh Intercom On".
- Join a Group: To join an existing group, ensure all devices are in Mesh Intercom mode. One rider can initiate a "Group Mesh" by pressing the Mesh Intercom button for 5 seconds. Other riders can then join by simply tapping their Mesh Intercom button.
- Multi-Channel Open Mesh: The Spider RT1 allows communication across 9 different open mesh channels. Riders can select a channel to communicate with others on the same channel.
An official Sena video highlighting the key features of the Sena Spider RT1 and ST1 models, including one-click Mesh Intercom, multi-channel open mesh, and extended range with multiple riders.
Operating Your Device
Basic Controls
The Sena Spider RT1 features a three-button interface for intuitive control.
- Power On/Off: Press and hold the (+) button and the Center button for 1 second.
- Volume Control: Tap the (+) button to increase volume, tap the (-) button to decrease volume.
- Music Play/Pause: Tap the Center button once.
- Track Forward/Backward: Press and hold the (+) button for 1 second for next track, press and hold the (-) button for 1 second for previous track.
- Answer/End Call: Tap the Center button once.
- Voice Assistant (Siri/Google Assistant): Press and hold the Center button for 3 seconds.
An informational video from Sena discussing the features and operation of the SF series communication systems. This segment demonstrates basic button commands for music and calls, applicable to the Spider RT1.
Audio Multitasking
The Spider RT1 supports Audio Multitasking, allowing you to hear two different audio sources simultaneously. For example, you can listen to music while participating in a Mesh Intercom conversation.
An official Sena video highlighting the Audio Multitasking feature of the Sena Spider RT1 and ST1 models, demonstrating simultaneous audio from device and Mesh Intercom.
Maintenance
Charging
The Sena Spider RT1 is equipped with a Lithium Polymer battery. A full charge takes approximately 1.5 hours. The device also supports a quick charge feature: 30 minutes of charging provides up to 4 hours of intercom talk time.
To charge, connect the included USB cable to the charging port on the device and a power source.
An informational video from Sena discussing the features and operation of the SF series communication systems. This segment demonstrates charging and highlights quick charge capabilities, applicable to the Spider RT1.
Firmware Updates
It is recommended to regularly update your device's firmware to ensure optimal performance and access to the latest features. Firmware updates can typically be performed via the Sena Device Manager software on your computer or through the Sena Motorcycle App.
Cleaning
To clean your Sena Spider RT1, use a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the device.
Troubleshooting
Common Issues
If you encounter issues with your Sena Spider RT1, try the following:
- No Power: Ensure the battery is charged. Connect the device to a charger.
- Pairing Issues: Ensure both devices are in the correct pairing mode. Try restarting both the headset and the smartphone/intercom device.
- No Audio: Check volume levels. Ensure speakers are correctly connected and positioned.
- Intercom Disconnection: Ensure devices are within range and there are no major obstructions.
Factory Reset
If problems persist, a factory reset can often resolve software-related issues. This will restore the device to its default settings.
- Enter Configuration Menu: With the device powered on, press and hold the Center button for 10 seconds until you hear "Configuration Menu".
- Navigate to Factory Reset: Use the (+) or (-) buttons to scroll through the options until you hear "Factory Reset".
- Confirm Reset: Tap the Center button to confirm. You will hear "Headset Reset" and the device will power off.
An informational video from Sena discussing the features and operation of the SF series communication systems. This segment demonstrates how to perform a factory reset, applicable to the Spider RT1.
Technical Specifications
| Feature | Detail |
|---|---|
| Model Name | SPIDER-RT1-01D |
| Brand | Sena |
| Connectivity Technology | Wireless (Bluetooth 5.2) |
| Bluetooth Version | 5.2 |
| Bluetooth Range | Up to 10 meters (phone connectivity) |
| Mesh Intercom Range | Up to 2 km (1.2 miles) in open terrain; up to 8 km (5 miles) with 6+ riders |
| Mesh Intercom Channels | 9 channels (Multi-Channel Open Mesh) |
| Speakers | Premium HD Speakers |
| Noise Control | Active Noise Cancellation |
| Talk Time | Up to 11.5 hours |
| Charging Time | 1.5 hours (full charge); 30 min for 4 hours intercom |
| Control Type | Three-button interface (Media Control, Touch) |
| Material | Plastic |
| Item Weight | 0.68 Kilograms (1.5 pounds) |
| Product Dimensions | 5.59 x 4.92 x 6.37 inches |
| Water Resistance Level | Not Water Resistant |
| UPC | 885465012061 |
Warranty and Support
For detailed warranty information and technical support, please refer to the official Sena website or contact Sena customer service directly. Keep your proof of purchase for warranty claims.
Visit the Sena Store for more products and support resources.
