1. Product Overview
The Craftmade Romero 4-Light Vanity Light, Model 56404-SB, is a modern lighting fixture designed for indoor use, specifically suitable for bathrooms. It features clear glass globes suspended from elegant loops, supported by a rectangular backplate, and finished in satin brass. This fixture is damp rated, making it appropriate for bathroom environments.
This vanity light requires four medium base (E26) bulbs, up to 60 watts each (bulbs not included).
Image 1.1: Front view of the Craftmade Romero 4-Light Vanity Light in Satin Brass with clear glass shades.
2. Safety Information
- WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring.
- This fixture is Damp Rated, suitable for use in bathrooms and other areas subject to moisture, but not direct water exposure.
- Use only the specified bulb type and wattage (4 x 60W Max, Medium Base E26). Exceeding the maximum wattage may cause overheating and damage to the fixture.
- Do not install this fixture on a surface that is not structurally sound.
- This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm (Proposition 65 warning).
3. Package Contents
Carefully unpack the fixture and check that all parts are included. Retain the packaging material until you are certain all parts are present and the fixture is working correctly.
- Vanity Light Fixture (Model 56404-SB)
- Shade(s) (Clear Glass)
- Hardware Pack (mounting bracket, screws, wire nuts, etc.)
- Installation Guide
Note: Light bulbs are NOT included and must be purchased separately.
4. Installation
This fixture requires assembly and is designed for semi-flush wall mount installation. Refer to the included detailed Installation Guide for specific steps and diagrams. Below are general guidelines:
- Turn off power: Locate the circuit breaker controlling the light fixture location and turn it OFF.
- Prepare mounting: Attach the mounting bracket to the junction box in the wall using the provided screws.
- Wire connections: Connect the fixture's electrical wires to the corresponding house wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
- Mount fixture: Carefully align the fixture's backplate with the mounting bracket and secure it with the provided screws.
- Install shades and bulbs: Attach the clear glass shades to the fixture. Insert four E26 medium base bulbs (max 60W each) into the sockets.
- Restore power: Turn the power back ON at the circuit breaker.
Image 4.1: Dimensional drawing of the Craftmade Romero 4-Light Vanity Light, showing approximate measurements of 30.38 inches in width, 8.88 inches in height, and 6.61 inches in depth.
5. Operating Instructions
The Craftmade Romero 4-Light Vanity Light is operated via a standard wall switch. Ensure the correct E26 medium base bulbs (up to 60W each) are installed. The fixture is compatible with most standard dimmer switches, allowing for adjustable light output.
- To turn the light ON or OFF, use the wall switch connected to the fixture.
- If using a dimmer switch, adjust the switch to achieve the desired brightness level.
6. Maintenance
Regular cleaning will help maintain the appearance and performance of your vanity light.
- Cleaning the Fixture: Always turn off the power to the fixture and allow it to cool before cleaning. Wipe the metal parts with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents, as these may damage the finish.
- Cleaning the Glass Shades: The clear glass shades can be removed for cleaning. Wash with mild soap and water, rinse thoroughly, and dry with a lint-free cloth. Reinstall only when completely dry.
- Bulb Replacement: Ensure power is off and bulbs are cool before replacing. Unscrew old bulbs and screw in new E26 medium base bulbs (max 60W).
7. Troubleshooting
If your vanity light is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connections. Faulty bulb(s). |
Check circuit breaker and wall switch. Ensure all wire connections are secure (with power off). Replace bulb(s) with new ones. |
| Light flickers. | Loose bulb. Incompatible dimmer switch. Loose wire connection. |
Tighten bulb(s). Ensure dimmer switch is compatible with the bulb type. Check wire connections (with power off). |
| Bulbs burn out quickly. | Incorrect bulb wattage. Poor ventilation. |
Ensure bulbs do not exceed 60W per socket. Verify fixture is not enclosed in a way that traps heat. |
8. Specifications
- Brand: Craftmade
- Model Name: Romero
- Model Number: 56404-SB
- Color: Satin Brass
- Material: Glass, Iron
- Style: Modern
- Light Fixture Form: Vanity
- Room Type: Bathroom
- Indoor/Outdoor Usage: Indoor
- Power Source: Corded Electric
- Light Source: LED (compatible, bulbs not included)
- Number of Light Sources: 4
- Voltage: 120 Volts
- Bulb Base: E26 (Medium Base)
- Max Wattage per Bulb: 60 Watts
- Total Wattage: 240 Watts (4 x 60W)
- Brightness: Up to 3000 Lumens (depending on bulbs used)
- Mounting Type: Wall Mount, Semi Flush Mount
- Shade Material: Glass
- Item Dimensions (L x W x H): 6.61" x 30.38" x 8.88"
- Item Weight: 6.8 Pounds
- Required Assembly: Yes
- Specification Met: Damp, cULus
9. Warranty and Support
This Craftmade product comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For customer support, technical assistance, or warranty inquiries, please contact Craftmade directly:
- Customer Support Phone: (800) 486-4892
Please have your model number (56404-SB) and date of purchase available when contacting support.
