Introduction
Thank you for choosing the ErGear Height Adjustable Electric Standing Desk. This manual provides essential information for the proper assembly, operation, and maintenance of your new desk. Designed for both sitting and standing, this desk promotes a healthier and more productive workspace by allowing you to easily switch between postures. Please read this manual thoroughly before beginning assembly or operation to ensure safe and efficient use.
Figure 1: ErGear Height Adjustable Electric Standing Desk in a typical office setup.
Key Features
- Outstanding Stability: Features a sturdy solid steel frame with aerospace-grade lifting column connectors, ensuring stability even at full height.
- Smooth Height Adjustment: Electrically adjustable height from 28.35 inches to 46.103 inches, with three programmable memory settings for quick transitions.
- Uprated Motor: Powerful lifting performance and reliable long-term operation, tested for over 50,000 cycles.
- Safe Low-VOC Materials: Constructed with materials that significantly reduce formaldehyde and other VOC emissions, meeting US federal and state safe air standards.
Setup and Assembly
The ErGear Electric Standing Desk is designed for simplified assembly. An average assembly time of 30 minutes is expected. Please follow the detailed instructions provided in the included Installation Manual (PDF) for a smooth setup process. Ensure all components are present before beginning assembly.
Assembly Steps Overview:
- Unpack all components and verify against the parts list in the manual.
- Assemble the desk frame according to the diagrams.
- Attach the two-piece desktop to the assembled frame.
- Connect the motor and control panel cables as instructed.
- Perform initial calibration as described in the manual.
For detailed, step-by-step instructions, please refer to the Installation Manual (PDF).
Figure 2: Simplified assembly process for the ErGear standing desk.
Operating Instructions
Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustments and memory settings.
Height Adjustment:
- Use the Up (▲) and Down (▼) buttons on the control panel to manually adjust the desk height to your desired level.
- The digital display will show the current height in inches.
Memory Presets:
The desk allows you to save up to three preferred height settings for quick recall.
- Adjust the desk to your desired height using the Up/Down buttons.
- Press the 'M' button. The display will flash 'S-'.
- Within 3 seconds, press one of the numbered preset buttons ('1', '2', or '3') to save the current height to that position.
- To recall a saved height, simply press the corresponding numbered preset button ('1', '2', or '3'). The desk will automatically move to the saved position.
Figure 3: Demonstrating the wide height range of the ErGear standing desk.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your ErGear Electric Standing Desk.
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Cable Management: Periodically check and organize cables to prevent tangling or damage, especially when adjusting desk height.
- Fasteners: Occasionally check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
- Motor Care: The motor is designed for durability. Avoid overloading the desk beyond its maximum weight capacity (176 lbs).
Troubleshooting
If you encounter any issues with your ErGear Electric Standing Desk, please refer to the following common troubleshooting tips:
- Desk Not Moving:
- Ensure the power cord is securely plugged into both the desk and a working power outlet.
- Check all cable connections between the motor, control panel, and power supply.
- Perform a reset by unplugging the desk for 30 seconds, then plugging it back in.
- Unusual Noises (e.g., Coil Whining):
- A slight hum during operation is normal. If you hear a loud or persistent whining noise, especially from the power adapter, contact customer support.
- Desk Wobbles:
- Ensure all assembly screws are fully tightened.
- Verify the desk is on a flat, stable surface. Adjust leveling feet if necessary.
- Error Codes on Display:
- Refer to the Installation Manual (PDF) for a list of specific error codes and their corresponding solutions.
If the issue persists after attempting these steps, please contact ErGear customer support for further assistance.
Product Specifications
| Feature | Specification |
|---|---|
| Brand | ErGear |
| Model Number | EGESD7N |
| Product Dimensions | 63 x 28 Inches (Desktop) |
| Height Adjustment Range | 28.35 Inches (Min) to 46.5 Inches (Max) |
| Maximum Weight Recommendation | 176 Pounds |
| Base Material | Alloy Steel |
| Top Material Type | Engineered Wood |
| Number of Height Positions | 3 (Memory Presets) |
| Included Components | Dual cable access holes, Storage hooks |
Warranty and Support
ErGear is committed to providing high-quality products and excellent customer service. Your electric standing desk comes with comprehensive warranty coverage:
- 5-Year Protection: On the desktop and desk frame.
- 2-Year Protection: On motors and electrical components.
For any questions, concerns, or warranty claims, please contact ErGear customer support. We are here to help you with any issues you may encounter.
Figure 4: ErGear customer support is available to assist you.
