Geloo 14000RPM Motorcycle LCD Digital Instrument Manual

Introduction

Thank you for choosing the Geloo 14000RPM Motorcycle LCD Digital Instrument. This comprehensive device integrates a tachometer, speedometer, and gear indicator, providing essential riding information in a clear and accessible format. Designed for durability and ease of use, it features a robust construction and a customizable display to enhance your riding experience.

Key Features

• Multiple Functions: Combines tachometer, speedometer, and gear indicator in one unit.
• Integrated Speed Sensor: Ensures high working accuracy and professional performance.
• Durable Construction: Robust ABS shell with clear lens, waterproof and shockproof design.
• Clear Display: Glare-free display with backlight for easy viewing in all conditions.
• Adjustable Backlight: 7 customizable backlight colors to suit user preference.
• Versatile Compatibility: Applicable to various vehicles with different diameters and displacements.

Specifications

Package Contents

Upon opening the package, please ensure all the following items are present and in good condition:

• 1 x Geloo Motorcycle Tachometer
• 1 x Speed Sensor
• 2 x Magnets
• 1 x Installation Instruction (Wiring Diagram)

Setup and Installation

Proper installation is crucial for the correct functioning of your new instrument. It is recommended that installation be performed by a qualified technician if you are unfamiliar with motorcycle electrical systems.

Wiring Diagram

The instrument comes with a detailed wiring diagram. Please refer to the provided diagram for specific connections. Ensure all connections are secure and insulated to prevent short circuits.

Speed Sensor Installation

Install the speed sensor in a location where it can accurately detect wheel rotation, typically near the wheel hub. Ensure the magnets are securely attached to the wheel and pass close enough to the sensor for reliable signal detection.

Mounting the Instrument

Mount the instrument securely on your motorcycle's dashboard or handlebars using appropriate brackets (not included unless specified). Ensure it is positioned for clear visibility and does not obstruct your view or control of the motorcycle.

Operating Instructions

Basic Operation

Once properly installed and wired, the instrument will power on with your motorcycle's ignition. The display will show current speed, RPM, odometer, and other indicators.

Display Functions

• Speed: Digital display of current speed in km/h or mph.
• RPM: Analog needle display for engine revolutions per minute.
• Odometer (ODO): Total accumulated distance.
• Trip Meter (TRIP): Resettable distance for individual trips.
• Gear Indicator: Displays current gear (1-6) and Neutral (N).
• Fuel Level: LED indicator for fuel tank level, with low fuel warning.
• Indicators: Left/Right turn signals, High Beam, Engine Check, Battery Voltage.
• Clock: Time display.

Setting Adjustments

The instrument features a button (referred to as KI/K1 and K2 in some instructions) for navigating and adjusting settings. The following adjustments can be made:

1. Entering Settings: On the TRIP page, long press the KI button to enter the settings menu. The password is 888.
2. Wheel Circumference (ID-OOO): Long press KI to edit tire circumference (initial setting 180 cm). While the first digit blinks, short press K2 to edit the digit. Short press KI to move to the next digit (second or third). This setting adjusts speed accuracy based on your tire size.
3. Speed Pulse Signal (PULSE): Short press KI to enter the PULSE page. Short press K2 to set the number of magnets (2, 4, or 6) detected by the speed sensor.
4. Engine Stroke (FACTOR): Short press KI to enter the FACTOR page. Short press K2 to switch between 0 or 1, depending on your engine type.
5. Unit System (TRIP Menu): Short press KI to enter the TRIP menu for miles/kilometer system. Short press K2 to switch between metric (km/h) and imperial (mph) units.
6. Fuel Level Sensor (FUEL): Short press KI to enter the FUEL page. Short press K2 to switch between 2 (2-wire fuel meter) or 3 (3-wire fuel meter) settings.
7. Backlight Color: Under ODO condition, short press the right button to cycle through the 7 available backlight colors (Blue, Blue/Red, Red, Red/Green, Green, Green/Blue, White).
8. Exiting Settings: After making adjustments, wait 20 seconds or long press KI to exit the program and save settings.

Maintenance

To ensure the longevity and optimal performance of your Geloo instrument, follow these simple maintenance guidelines:

• Cleaning: Use a soft, damp cloth to clean the display and casing. Avoid abrasive cleaners or solvents that could damage the plastic or screen.
• Water Exposure: While the unit is designed to be waterproof, avoid direct high-pressure water jets, especially around the connections.
• Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
• Storage: If storing the motorcycle for an extended period, ensure the instrument is clean and dry.

Troubleshooting

If you encounter issues with your Geloo instrument, refer to the following common problems and solutions:

Warranty and Support

Geloo products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Geloo website. Keep your proof of purchase for any warranty claims.