UpBright 24V AC/DC Adapter User Manual

Product Overview

The UpBright 24V AC/DC Adapter is designed to provide reliable power to compatible devices, specifically the IKEA Solbo B1609 White Owl 9" Table Desk Lamp models 003.286.82 and 804.337.21. This adapter converts standard AC wall power to the required 24V DC, ensuring safe and efficient operation of your lamp.

Image: The UpBright 24V AC/DC adapter, showing the main power brick and the attached DC output cable with its barrel connector. This is the primary component for powering your compatible device.

Compatibility

This adapter is specifically compatible with the following IKEA Solbo lamp models:

• IKEA Solbo Type No. B1609 White Owl 9" Bedside Kids Table Lamp Night Light
• IKEA SOLBO 003.286.82 White Owl Table Desk Lamp
• IKEA Solbo 804.337.21 Table Desk Lamp

Image: Three views of the IKEA Solbo White Owl lamp, demonstrating its design and appearance. This adapter is designed to power this specific lamp model.

Setup Instructions

1. Unpack: Carefully remove the UpBright AC/DC adapter from its packaging.
2. Inspect: Before use, visually inspect the adapter and its cables for any signs of damage. Do not use if damaged.
3. Connect to Device: Locate the power input port on your IKEA Solbo lamp. Insert the barrel connector of the UpBright adapter firmly into this port. Ensure a snug fit.


Image: A close-up view of the barrel connector at the end of the adapter's output cable, highlighting the part that connects to the lamp's power input.

4. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100-240VAC 50/60Hz wall power outlet.
5. Verify Operation: Once connected, your IKEA Solbo lamp should power on or be ready for operation.

Operating Instructions

The UpBright AC/DC adapter is designed for continuous operation. Once connected to a compatible IKEA Solbo lamp and a power outlet, it will provide the necessary power. There are no user-adjustable settings on the adapter itself.

• Ensure the adapter is always plugged into a properly grounded electrical outlet.
• Do not cover the adapter during operation to allow for proper ventilation.
• If the lamp has an on/off switch, use that to control the lamp's power.

Maintenance

The UpBright AC/DC adapter requires minimal maintenance to ensure its longevity and safe operation.

• Cleaning: Disconnect the adapter from the power outlet and the lamp before cleaning. Use a soft, dry cloth to wipe down the adapter. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
• Cable Care: Regularly check the power cable and connector for any signs of fraying, cuts, or bends. If any damage is observed, discontinue use immediately.

Troubleshooting

Specifications

Warranty and Support

UpBright products are designed for reliability and come with a commitment to customer satisfaction.

• Refund Policy: 30 days Refund.
• Exchange Policy: 24 Months Exchange.

For any inquiries or support, please refer to the contact information provided with your purchase or visit the official UpBright store on Amazon.

Image: This image illustrates the availability of suitable outlet adapters for international orders (AU, EU, UK) and references a UpBright Limited Warranty Certificate, indicating product support and coverage.