Secretlab Titan Evo Gaming Chair User Manual

Introduction

The Secretlab Titan Evo Gaming Chair is engineered for superior comfort and ergonomic support, designed to enhance your experience during long hours of work or play. This manual provides essential information on assembly, operation, maintenance, and troubleshooting to ensure optimal use of your chair.

Key Features:

• Cold-Cure Foam: Provides firm yet comfortable support for ideal posture.
• Magnetic Head Pillow: Memory foam pillow that easily adjusts and stays in place without straps.
• 4D Armrests: Full-metal armrests offering multi-directional adjustments and replaceable tops.
• Multi-Tilt Mechanism: Full-length backrest with up to 165° recline for versatile positioning.
• 4-Way Lumbar Support: Built-in adjustable lumbar support adapts to your spine.
• NEO™ Hybrid Leatherette: Durable and supple material, 12x more durable than regular PU leather.
• Reinforced Aluminum Wheelbase: Provides enhanced stability and durability.

Figure 1: Fully assembled Secretlab Titan Evo Black Gaming Chair.

Setup and Assembly

The Secretlab Titan Evo chair is designed for straightforward assembly. It is recommended to have a clear, spacious area for assembly. Follow these general steps:

1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the included assembly guide are present.
2. Attach Casters: Insert the five casters into the holes at the end of each leg of the wheel base until they click securely into place.
3. Insert Hydraulic Piston: Place the hydraulic piston firmly into the center hole of the assembled wheel base.
4. Attach Armrests: Secure the armrests to the underside of the seat base using the provided screws. Ensure they are aligned correctly.
5. Connect Backrest to Seat Base: Align the backrest with the seat base and secure it using the designated bolts.
6. Mount Chair onto Piston: Carefully place the assembled seat and backrest onto the hydraulic piston, ensuring it is centered and stable.
7. Attach Head Pillow: Position the magnetic head pillow on the upper part of the backrest. It will snap into place due to embedded magnets.

For detailed visual instructions and specific torque requirements, always refer to the comprehensive assembly guide included with your product or the official Secretlab assembly videos available online.

Figure 2: Front and back views of the Secretlab Titan Evo chair, illustrating its design.

Operating Your Chair

Recline Function:

To adjust the backrest angle, locate the recline lever on the right side of the chair, beneath the seat. Pull the lever upwards to unlock the backrest, then lean back or forward to your desired position. Release the lever to lock the backrest securely in place. The backrest can recline up to 165 degrees for maximum comfort.

Figure 3: Side view of the Secretlab Titan Evo chair, showcasing its extensive recline capability.

Height Adjustment:

The chair's height is adjusted using the lever located on the right side, under the seat. To raise the chair, lift the lever while taking your weight off the seat. To lower the chair, lift the lever while seated, allowing your weight to depress the gas lift.

4D Armrests:

The full-metal 4D armrests provide comprehensive adjustability to support your arms and shoulders. Each armrest can be adjusted independently:

• Height Adjustment: Press the button on the side of the armrest and slide it up or down to your preferred height.
• Forward/Backward: Slide the armrest pad forward or backward to optimize desk clearance or support.
• Left/Right Swivel: Rotate the armrest pad left or right to find the most comfortable angle.
• Inward/Outward: Slide the armrest pad closer to or further from your body.

Figure 4: Detailed view of the 4D armrests, illustrating their extensive range of motion.

4-Way L-ADAPT™ Lumbar Support System:

The innovative L-ADAPT™ Lumbar Support System is integrated into the backrest, allowing for precise customization of lumbar support. Use the two adjustment knobs located on the sides of the backrest:

• Depth Adjustment (In & Out): Rotate the front knob to increase or decrease the protrusion of the lumbar support.
• Height Adjustment (Up & Down): Rotate the rear knob to move the lumbar support vertically along your spine.

Figure 5: Visual representation of the 4-way L-ADAPT™ lumbar support system's adjustability.

Magnetic Head Pillow:

The magnetic memory foam head pillow provides superior neck and head support. Simply place it on the upper portion of the backrest, and the embedded magnets will secure it in position. You can easily slide it up or down to find the perfect height for your comfort.

Figure 6: The magnetic head pillow, designed for easy adjustment and secure placement.

Maintenance and Care

Cleaning the Leatherette:

The Secretlab NEO™ Hybrid Leatherette is engineered for durability and easy maintenance. To keep your chair looking its best:

• For daily cleaning, wipe the surface with a clean, soft, damp cloth.
• For tougher stains, use a mild soap solution (e.g., diluted dish soap) on a soft cloth. Gently wipe the affected area, then wipe with a clean, damp cloth to remove any soap residue.
• Immediately dry the surface thoroughly with a clean, dry cloth.
• Avoid: Harsh chemicals, abrasive cleaners, solvents, or excessive moisture, as these can damage the leatherette.

Figure 7: Close-up detail of the Secretlab NEO™ Hybrid Leatherette, highlighting its premium texture.

General Maintenance:

• Tighten Fasteners: Periodically check all screws and bolts, especially those connecting the backrest, armrests, and tilt mechanism, and tighten them if they have loosened over time.
• Clean Casters: Remove any hair, dust, or debris that may accumulate around the casters to ensure smooth rolling and prevent damage to your flooring.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the material to fade or degrade. Position your chair away from direct sunlight when possible.

Troubleshooting

This section addresses common issues you might encounter with your Secretlab Titan Evo Gaming Chair.

Chair Squeaks or Creaks:

If your chair develops squeaking or creaking noises:

• Check Fasteners: Ensure all assembly screws and bolts are securely tightened. Loose connections are a common cause of noise.
• Lubricate Moving Parts: Apply a small amount of silicone-based lubricant to the joints of the tilt mechanism, gas lift, and any other moving metal-on-metal parts. Avoid oil-based lubricants on plastic components.

Armrests Feel Loose or Wobbly:

If the armrests do not feel stable:

• Tighten Armrest Bolts: Check the bolts securing the armrests to the underside of the seat base and tighten them.
• Inspect Armrest Tops: Ensure the replaceable armrest tops are securely attached and not damaged.

Gas Lift Not Functioning Correctly (Chair Not Adjusting Height):

If the chair's height adjustment is unresponsive:

• Check Lever Engagement: Ensure the height adjustment lever is fully engaged or disengaged as required. Sometimes, it may be stuck in an intermediate position.
• Clear Obstructions: Check for any obstructions around the gas lift cylinder.
• Contact Support: If the gas lift remains unresponsive, it may require replacement. Contact Secretlab Customer Support for further assistance.

Specifications

Warranty and Support

Warranty Information:

The Secretlab Titan Evo Gaming Chair is backed by a 5-year extended warranty. This warranty covers manufacturing defects and ensures the quality and durability of key components. For complete details regarding warranty coverage, terms, and conditions, please refer to the official Secretlab website or the warranty card included with your product.

Customer Support:

Should you have any questions, require technical assistance, or need to make a warranty claim, Secretlab's customer support team is available to help. You can find contact information and additional resources by visiting the official Secretlab website or their dedicated store page on Amazon:

Visit the Secretlab Official Store on Amazon