hygger 4-in-1 Submersible UV Filter Pump User Manual

1. Introduction

Thank you for choosing the hygger 4-in-1 Submersible UV Filter Pump. This device is designed to maintain a healthy and clear aquatic environment by providing water purification, filtration, oxygenation, and water circulation. It is suitable for both freshwater and saltwater aquariums ranging from 40 to 80 gallons.

Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

2. Safety Instructions

• Always disconnect power to all aquarium equipment before performing any maintenance, installation, or handling the pump.
• This pump is designed for submersible use only. Ensure it is fully submerged in water during operation.
• Do not operate the pump if the power cord or plug is damaged.
• Do not use this pump for purposes other than those specified in this manual.
• Keep out of reach of children.
• Ensure the voltage rating of the pump matches your local power supply (120 Volts).

3. Package Contents

Verify that all components are present and undamaged upon opening the package:

• hygger 4-in-1 Submersible UV Filter Pump unit
• Rainwater pipe assembly
• Oxygenation part (aerator tube and connector)
• Activated carbon filter cotton (2 pieces)
• Suction cups for mounting

Figure 1: Product components and dimensions.

4. Product Overview

The hygger 4-in-1 filter pump integrates multiple functions into a single compact unit:

• Water Purification: Built-in 8-watt UV bulb helps eliminate green water and harmful bacteria.
• Filtered Water: Activated carbon filter cotton removes impurities and odors.
• Water Circulation & Oxygenation: The 6-watt water pump ensures constant water movement and can be configured for increased oxygen levels.
• Adjustable Flow: Maximum flow rate of 210 GPH with adjustable output.

Figure 2: Internal structure and water flow.

5. Setup and Installation

Before installation, ensure the aquarium is clean and filled with water to the desired level.

5.1 Attaching Filter Media

1. Unscrew the bottom cover of the pump unit.
2. Insert the activated carbon filter cotton pieces into the designated slots inside the pump body.
3. Securely reattach the bottom cover.

Figure 3: Activated Carbon Filter Cotton.

5.2 Rainwater Pipe Installation

For surface agitation and natural oxygenation:

1. Connect the elbow joint to the pump's water outlet.
2. Attach the rainwater pipe sections to the elbow joint, ensuring a secure fit.
3. Position the pump inside the aquarium using the suction cups, ensuring the rainwater pipe is above the water surface for a waterfall effect.

Figure 4: Rainwater Pipe Installation Steps.

5.3 Aerator Tube Installation (for increased oxygen)

For direct air injection and increased dissolved oxygen:

1. Connect the aerator tube connector to the pump's water outlet.
2. Attach the flexible aerator tube to the connector.
3. Position the pump inside the aquarium using the suction cups. The aerator tube should extend above the water surface to draw in air.
4. Adjust the intake valve on the aerator tube to control the air volume.

Figure 5: Aerator Tube Installation and Air Volume Adjustment.

5.4 General Placement

• Ensure the pump is fully submerged in water before plugging it in.
• Use the strong suction cups to firmly attach the pump to the aquarium glass.
• The 180° adjustable water outlet allows for various angles of placement, suitable for both high and low water levels.

Figure 6: Various Installation Methods.

6. Operating Instructions

6.1 Powering On/Off

Once installed and fully submerged, plug the pump into a suitable power outlet. The pump will begin operating immediately.

6.2 UV Light Timer Function

The pump features a built-in timer for the UV light, controlled by the inline switch on the power cord. This allows for energy saving and extends the UV bulb's lifespan.

Figure 7: UV Light Timer Controller.

• 4 Hours: Press the button until the red indicator light is on. The UV light will operate for 4 hours and then turn off, repeating daily at the same time.
• 8 Hours: Press the button until the green indicator light is on. The UV light will operate for 8 hours and then turn off, repeating daily at the same time.
• 24 Hours (Continuous): Press the button until both red and green indicator lights are on. The UV light will operate continuously.
• Off: Press the button until no indicator lights are on. The UV light will not operate.

6.3 Adjusting Water Flow

The water flow rate can be adjusted by rotating the knob located on the top of the pump unit. Turn clockwise to decrease flow and counter-clockwise to increase flow.

Figure 8: Water Flow Adjustment Knob.

6.4 Adjusting Water Outlet Direction

The water outlet can be rotated 180° to direct the water flow as desired, accommodating various aquarium setups and water levels.

Figure 9: Water Outlet Direction Adjustment.

7. Maintenance

Regular maintenance ensures optimal performance and extends the life of your filter pump.

7.1 Cleaning the Filter Pump

1. Disconnect Power: Always unplug the pump from the power outlet before cleaning.
2. Remove from Aquarium: Carefully remove the pump from the aquarium.
3. Disassemble: Unscrew the bottom cover and separate the pump components.
4. Clean Filter Media: Rinse the activated carbon filter cotton under clean aquarium water (not tap water, to preserve beneficial bacteria) or replace it if heavily soiled.
5. Clean Impeller: Remove the impeller cover and carefully clean the impeller and its housing with a small brush to remove any debris or buildup.
6. Clean UV Quartz Sleeve: Gently wipe the quartz sleeve surrounding the UV bulb with a soft cloth to remove algae or mineral deposits. Do not touch the UV bulb directly with bare hands.
7. Reassemble: Reassemble all components in reverse order, ensuring all seals are properly seated.

7.2 UV Bulb Replacement

The UV bulb has a limited lifespan and should be replaced periodically (typically every 6-12 months, depending on usage) to maintain effectiveness.

1. Disconnect Power: Unplug the pump.
2. Access UV Bulb: Carefully disassemble the pump to access the UV bulb and its quartz sleeve.
3. Remove Old Bulb: Gently pull out the old UV bulb. Avoid touching the new bulb with bare hands; use gloves or a soft cloth.
4. Insert New Bulb: Insert the new UV bulb into the socket.
5. Reassemble: Reassemble the pump, ensuring the quartz sleeve and all seals are correctly in place.

8. Troubleshooting

9. Specifications

• Model: B0B3R6X3V5
• Brand: hygger
• Functions: 4-in-1 (Water Purification, Filtration, Oxygenation, Circulation)
• UV Bulb Wattage: 8 Watts
• Pump Wattage: 6 Watts
• Voltage: 120 Volts
• Maximum Flow Rate: 210 GPH (3.5 Gallons Per Minute)
• Recommended Tank Size: 40-80 Gallons
• Material: Plastic
• Item Weight: 1.81 Pounds
• Package Dimensions: 13.54 x 3.78 x 3.35 inches

10. Warranty and Support

This hygger product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact hygger customer support directly. If you encounter any issues or have questions regarding your filter pump, please visit the official hygger website or contact their customer service department for assistance.

For further support, you may also refer to the product page on Amazon: hygger 4-in-1 Submersible UV Filter Pump on Amazon