Hexgears X1 Pro Wireless Mechanical Gaming Keyboard User Manual

Introduction

The Hexgears X1 Pro is a versatile mechanical gaming keyboard designed for performance and comfort. It features triple connectivity modes (2.4G wireless, Bluetooth 5.0, USB-C wired), a compact 65% layout with 68 keys, and hot-swappable Kailh Box switches. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.

Image: Hexgears X1 Pro Wireless Mechanical Gaming Keyboard with detachable wrist rest.

What's in the Box

• Hexgears X1 Pro Wireless Mechanical Gaming Keyboard
• Detachable Wrist Rest
• USB-C to USB-A Cable
• 2.4G USB Dongle
• Keycap Puller
• Switch Puller

Image: The Hexgears X1 Pro keyboard shown with its included accessories: wrist rest, USB cable, and USB dongle.

Setup

1. Charging the Keyboard

Before first use, it is recommended to fully charge the keyboard. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to a USB power source (e.g., computer USB port, wall adapter). The LED indicator will show charging status.

Image: The Hexgears X1 Pro keyboard illustrating its long battery life, with a graphic indicating 2300mAh battery and 100 million keystroke test durability.

2. Connecting the Keyboard

The Hexgears X1 Pro supports three connection modes:

a. 2.4G Wireless Connection

1. Locate the 2.4G USB dongle included in the package.
2. Plug the USB dongle into an available USB port on your computer.
3. On the keyboard, ensure the mode switch (usually on the back or side) is set to 2.4G wireless mode.
4. The keyboard should automatically connect.

b. Bluetooth 5.0 Connection

1. Ensure the keyboard's mode switch is set to Bluetooth mode.
2. On your device (PC, Mac, Laptop), enable Bluetooth and search for new devices.
3. Select "Hexgears X1 Pro" from the list of available devices to pair.
4. Follow any on-screen prompts to complete the pairing process.

c. USB-C Wired Connection

1. Connect one end of the provided USB-C cable to the keyboard's USB-C port.
2. Connect the other end of the USB-C cable to a USB-A port on your computer.
3. The keyboard will automatically switch to wired mode and begin charging.

Image: The Hexgears X1 Pro keyboard from the underside, highlighting the USB-C port, 2.4G dongle storage, and illustrating the three connection methods: 2.4G, Bluetooth, and wired USB-C.

3. Attaching the Wrist Rest

The Hexgears X1 Pro comes with a detachable wrist rest for enhanced ergonomic comfort. Align the wrist rest with the front edge of the keyboard and gently push to attach it. It is designed to provide support and reduce strain during extended use.

Image: A user's hands positioned comfortably on the Hexgears X1 Pro keyboard with the ergonomic wrist rest attached, demonstrating proper wrist support.

Operating Instructions

1. Basic Keyboard Functions

The Hexgears X1 Pro features a 65% layout with 68 keys. Standard alphanumeric keys function as expected. Many keys have secondary functions accessible via the Fn key.

• Fn + F1-F12: Access multimedia controls and system functions (e.g., volume, play/pause, brightness). Refer to the keycaps for specific icons.
• Fn + Q/W/E: Switch between Bluetooth profiles (if applicable).
• Fn + R: Switch to 2.4G wireless mode.
• Fn + T: Switch to wired USB-C mode.
• Fn + Arrow Keys: Adjust backlight brightness or effects (if applicable).

2. Hot-Swappable Switches

The X1 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. This keyboard is compatible with 3-pin and 5-pin mechanical switches.

1. Removing a Keycap: Use the included keycap puller to gently lift the keycap straight up.
2. Removing a Switch: Use the included switch puller. Align the prongs of the puller with the two clips on the top and bottom of the switch. Squeeze the clips and gently pull the switch straight up.
3. Installing a New Switch: Ensure the pins on the new switch are straight. Align the pins with the holes on the PCB (Printed Circuit Board). Gently push the switch down until it clicks into place. Do not force it; if resistance is met, check pin alignment.
4. Re-installing a Keycap: Align the keycap with the stem of the switch and press down firmly until it is seated.

Image: A close-up view of the Hexgears X1 Pro keyboard demonstrating the hot-swappable Kailh Box switches, with individual switches shown detached from the board.

Image: A detailed diagram of a Kailh Box switch, highlighting its internal components, dust seal, and safety box for conductors, indicating 100 million click durability.

3. Backlight Control

The Hexgears X1 Pro features a soft white LED backlight. Use the Fn key combined with specific keys (refer to keycap legends) to adjust brightness or cycle through lighting modes. The soft white backlight is designed to be gentle on the eyes.

Maintenance

1. Cleaning the Keyboard

To clean your keyboard, first disconnect it from your computer. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid spraying liquids directly onto the keyboard. For dust and debris between keycaps, use compressed air or a small brush.

2. Keycap and Switch Maintenance

The X1 Pro uses double-shot PBT keycaps, which are durable and resistant to wear and oil. If keycaps become dirty, they can be removed using the keycap puller and washed with mild soap and water. Ensure they are completely dry before re-installing. Switches generally require no maintenance, but if a switch feels inconsistent, it can be replaced using the hot-swap feature.

Image: A close-up of the Hexgears X1 Pro keyboard highlighting its double-colored PBT keycaps, emphasizing their excellent touch experience.

3. Spill-Resistant Design

While the keyboard features a spill-resistant design, it is not waterproof. In case of a spill, immediately disconnect the keyboard, wipe off any liquid, and allow it to air dry completely before reconnecting. Do not attempt to use the keyboard if it is still wet.

Image: The Hexgears X1 Pro keyboard with water droplets on its surface, illustrating its spill-resistant design.

Troubleshooting

Specifications

• Model: Hexgears X1 Pro
• Layout: 65% (68 Keys)
• Switches: Kailh Box Hot-Swappable Mechanical Switches
• Keycaps: Double-shot PBT
• Connectivity: Triple Mode (2.4G Wireless, Bluetooth 5.0, USB-C Wired)
• Battery Life: Up to 300 hours (with LED lights off, based on 8 hours/day usage)
• Battery Capacity: 2300mAh (Lithium Ion)
• Backlight: Soft White LED
• Dimensions: 16 x 5 x 2.4 inches (approx.)
• Weight: 2.75 pounds (approx.)
• Compatibility: Windows, macOS, Linux, Gaming Consoles (via USB)

Warranty and Support

For warranty information and technical support, please refer to the official Hexgears website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Hexgears Official Store Link: Visit Hexgears Store on Amazon