1. Important Safety Information
Please read all instructions carefully before using the H.Koenig BW1688 beer dispenser. Retain this manual for future reference.
- Ensure the appliance is placed on a stable, level surface.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Keep out of reach of children.
- Unplug the appliance from the power outlet when not in use and before cleaning.
- Do not operate the appliance with a damaged cord or plug.
- Ensure adequate ventilation around the unit.
2. Package Contents
Verify that all components are present in the packaging:
- H.Koenig BW1688 Beer Dispenser Unit
- Removable Stainless Steel Tap Handle
- Removable Drip Tray
- Beer Tube
- 5L Keg Adapter
- Instruction Manual
Image 1: Front view of the H.Koenig BW1688 Beer Dispenser with tap handle and drip tray.
Image 2: Angled view of the H.Koenig BW1688 Beer Dispenser, showing the tap and control panel.
3. Setup Instructions
- Unpacking: Carefully remove all packaging materials and place the beer dispenser on a clean, stable, and level surface. Ensure there is sufficient space around the unit for proper ventilation.
- Assemble Drip Tray: Place the removable drip tray onto the base of the unit.
- Install Tap Handle: Attach the stainless steel tap handle to the dispensing mechanism.
- Prepare the Keg:
- The BW1688 is compatible with universal 5L and 6L pressurized kegs, as well as 6L non-pressurized kegs.
- For 5L kegs, use the provided 5L keg adapter and beer tube.
- For 6L kegs, ensure the correct adapter and tube are used as per the keg manufacturer's instructions.
- Note: Not all 5L kegs are compatible; only those with their own integrated pressure system are suitable. Standard 5L party kegs without an internal pressure system are not compatible.
- Insert Keg: Open the top cover of the dispenser and carefully place the prepared keg inside. Ensure the beer tube is properly connected to the keg and the dispensing mechanism.
- Close Cover: Securely close the top cover.
- Power Connection: Plug the power cord into a suitable electrical outlet.
Image 3: Exploded view showing the main unit, top cover, tap assembly, drip tray, and keg adapters.
4. Operating Instructions
- Initial Cooling: After plugging in, the unit will begin cooling the keg. This process may take several hours depending on the initial temperature of the keg. The LED display will show the current temperature.
- Temperature Adjustment: Use the '+' and '-' buttons on the LED control panel to set your desired temperature between 3°C and 12°C. The display will show the set temperature and the actual temperature.
- LED Display Functions: The LED panel displays the current temperature, estimated remaining volume, and days of preservation for the beer.
Image 4: Close-up of the LED control panel showing temperature display and adjustment buttons.
- Dispensing Beer:
- Place a glass under the tap.
- Pull the tap handle forward to dispense beer.
- Push the tap handle back to stop the flow.
- Tip: For optimal pour and minimal foam, tilt the glass at a 45-degree angle initially, then straighten it as it fills.
Image 5: The beer dispenser in operation, pouring beer into a glass.
5. Maintenance and Cleaning
Regular cleaning ensures optimal performance and hygiene of your beer dispenser.
- Before Cleaning: Always unplug the appliance from the power outlet before cleaning.
- Drip Tray: The drip tray is removable for easy cleaning. Empty and wash it with warm, soapy water after each use or as needed. Rinse thoroughly and dry.
- Tap Handle: The tap handle is removable. Clean it with warm, soapy water. Ensure no beer residue remains. Rinse and dry completely before reattaching.
- Exterior: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
- Internal Components: For thorough cleaning of internal beer lines and adapters, follow the specific cleaning instructions provided by your keg manufacturer or use a dedicated beer line cleaning solution.
6. Troubleshooting
If you encounter issues with your H.Koenig BW1688 beer dispenser, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Not plugged in; power outlet malfunction. | Ensure the power cord is securely plugged into a working outlet. |
| Beer is not cooling sufficiently. | Keg not pre-chilled; poor ventilation; high ambient temperature. | Pre-chill kegs before insertion. Ensure adequate space around the unit for ventilation. Allow sufficient time for cooling (can be long at startup). |
| Excessive foam when dispensing. | Keg too warm; incorrect pouring technique; beer line issues. | Ensure beer is at the correct temperature. Use proper pouring technique (tilt glass). Check beer lines for blockages or damage. |
| No beer flow. | Keg empty; beer tube kinked or blocked; keg not properly connected. | Check keg level. Inspect beer tube for kinks or blockages. Re-seat the keg and ensure all connections are secure. Verify keg compatibility (pressurized). |
| Unit is noisy. | Normal operation of cooling fan. | Some noise from the cooling fan is normal, especially during initial cooling or in warmer environments. Ensure unit is on a stable surface to minimize vibrations. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | H.Koenig |
| Model Number | BW1688 |
| Compatibility | Universal 5L and 6L pressurized kegs, 6L non-pressurized kegs |
| Temperature Range | 3°C to 12°C |
| Power | 65 Watts |
| Material | Plastic (main body), Stainless Steel (tap handle) |
| Dimensions (L x W x H) | 46 x 29 x 47 cm |
| Weight | 6.9 Kilograms |
| Display | LED control panel (temperature, volume, preservation days) |
8. Warranty and Support
The H.Koenig BW1688 Beer Dispenser comes with an extended 2-year warranty. This warranty covers manufacturing defects and ensures peace of mind for prolonged and reliable use.
For warranty claims, technical assistance, or spare parts inquiries, please contact H.Koenig customer service. A dedicated after-sales service workshop is available in France to provide support.
Please refer to your purchase documentation or the official H.Koenig website for specific contact details and warranty terms.
