Braun 71-S4200cs

Braun Series 7 Electric Shaver Model 71-S4200cs User Manual

Model: 71-S4200cs

1. Introduction

Thank you for choosing the Braun Series 7 Electric Shaver. This manual provides essential information for the safe and effective use, maintenance, and care of your shaver. Please read these instructions thoroughly before first use and keep them for future reference.

The Braun Series 7 shaver is designed for a smooth and comfortable shave, featuring a 360° flexible head, AutoSense technology, and Wet & Dry functionality. It comes with a precision trimmer attachment and a charging base for convenience.

2. Important Safety Information

WARNING: This appliance is suitable for cleaning under running water. Do not use it near water or immerse it in water if it is connected to the mains. Always disconnect the shaver from the power outlet before cleaning with water.

  • Keep the appliance dry when charging.
  • Do not use the appliance with a damaged foil or cord.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • For hygienic reasons, do not share this appliance with other persons.
  • Only use the power supply provided with your appliance.

3. Package Contents

Upon unpacking your Braun Series 7 shaver, please ensure all the following components are present:

  • Braun Series 7 Electric Shaver
  • Precision Trimmer Attachment
  • Charging Base
  • Travel Case
  • Smart Charger (for 100-240V automatic voltage adjustment)
  • Cleaning Brush
Braun Series 7 Electric Shaver 71-S4200cs full kit contents
Figure 3.1: All components included with the Braun Series 7 Electric Shaver Model 71-S4200cs. This image displays the shaver, precision trimmer, charging base, travel case, smart charger, and cleaning brush.

4. Setup

  1. Unpack the Shaver: Carefully remove all components from the packaging.
  2. Initial Charging: Before using your shaver for the first time, it is recommended to fully charge it.
    • Connect the smart charger to the charging base.
    • Place the shaver into the charging base.
    • Plug the smart charger into a power outlet.
    • The charging indicator on the shaver will show the charging status. A full charge provides up to 50 minutes of cordless shaving. A quick 5-minute charge is sufficient for one shave.
    Braun Series 7 Shaver battery indicator showing 50 minutes Li-ion battery life
    Figure 4.1: The shaver's display indicating battery charge level and 50 minutes of Li-ion battery life.
  3. Attaching the Precision Trimmer: The shaver is compatible with the EasyClick system.
    • To attach the precision trimmer, first remove the shaver head by pressing the release buttons on the sides.
    • Click the precision trimmer attachment onto the shaver body until it locks into place.
    Braun Series 7 Shaver with EasyClick precision trimmer attachment
    Figure 4.2: The Braun Series 7 shaver demonstrating the EasyClick system with the precision trimmer attachment. The image shows how the trimmer can be attached to the shaver body.

5. Operating Instructions

  1. Power On/Off: Press the power button to turn the shaver on or off.
  2. Shaving Technique:
    • For best results, hold the shaver at a right angle (90°) to your skin.
    • Stretch your skin and shave against the direction of hair growth.
    • The 360° flexible head adapts to your facial contours, ensuring optimal skin contact.
    • The AutoSense technology reads your beard density and adjusts power accordingly, capturing more hairs in each stroke.
    Braun Series 7 Shaver 360 degree flexible head
    Figure 5.1: Close-up of the Braun Series 7 shaver head, highlighting its 360° flexibility for adapting to facial contours.
    Braun Series 7 Shaver with AutoSense Technology
    Figure 5.2: Illustration of the Braun Series 7 shaver's AutoSense Technology, showing how it detects beard density and adjusts motor power for efficient shaving.
  3. Wet & Dry Use: The shaver is 100% waterproof.
    • You can use it for a dry shave or with foam, gel, or even in the shower for a refreshing experience.
    • Always ensure the shaver is disconnected from the power supply when used with water.
    Braun Series 7 Shaver being used wet with water droplets
    Figure 5.3: The Braun Series 7 shaver being used under running water, demonstrating its Wet & Dry capability.
  4. Using the Precision Trimmer:
    • Attach the precision trimmer as described in the Setup section.
    • Use the trimmer to shape sideburns, moustaches, or trim longer hairs before shaving.

6. Maintenance and Cleaning

Regular cleaning ensures optimal shaving performance and extends the lifespan of your shaver.

  1. Quick Cleaning (After each shave):
    • Turn off the shaver.
    • Remove the shaver head.
    • Rinse the shaver head and the shaver body under hot running water until all hair residues are removed.
    • Shake off excess water and let the shaver head air dry.
  2. Thorough Cleaning (Weekly or as needed):
    • For a more thorough clean, use the provided cleaning brush to remove stubborn hair particles from the shaver head and inner parts.
    • Do not use the brush on the foil itself, as this can damage it.
  3. Lubrication: Periodically apply a drop of light machine oil (e.g., Braun shaver oil) to the shaver foil and cutter block to maintain optimal performance.
  4. Replacing Shaver Parts:
    • To maintain 100% shaving performance, replace the shaver foil and cutter block every 18 months, or when worn.
    • Replacement parts are available from Braun retailers or online.

7. Troubleshooting

ProblemPossible CauseSolution
Shaver does not turn on.Battery is depleted.Charge the shaver for at least 5 minutes, or fully for 50 minutes of use.
Poor shaving performance.Foil or cutter block is worn or dirty.Clean the shaver head thoroughly. Consider replacing the foil and cutter block if they are older than 18 months.
Shaver makes unusual noise.Hair accumulation or damaged parts.Clean the shaver head. Inspect the foil and cutter block for damage. If damaged, replace them.
Skin irritation after shaving.Incorrect shaving technique or sensitive skin.Ensure you are shaving against the grain and stretching the skin. Try using the shaver with shaving foam or gel for a gentler shave.

8. Specifications

  • Model: 71-S4200cs
  • Power Source: Rechargeable Li-ion Battery
  • Battery Autonomy: Up to 50 minutes
  • Quick Charge: 5 minutes for one shave
  • Water Resistance: 100% waterproof (Wet & Dry use)
  • Blade Material: Stainless Steel
  • Head Type: Foil, 360° Flexible
  • Special Features: AutoSense Technology, EasyClick System
  • Dimensions (L x W x H): 50 x 50 x 28 cm
  • Weight: 428 grams
  • Input Voltage (Charger): 100-240V (Automatic adjustment)

9. Warranty and Support

Your Braun Series 7 Electric Shaver comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For further assistance, product registration, or to purchase replacement parts, please visit the official Braun website or contact Braun customer service in your region. Contact information can typically be found on the Braun website or in the documentation provided with your product.

© 2024 Braun. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.