Coverado Car Seat Covers Full Set - Model D8808 Instruction Manual

1. Introduction

Thank you for choosing Coverado Car Seat Covers. This full set is designed to provide superior protection and enhance the comfort and aesthetics of your vehicle's interior. Made from high-quality, breathable Nappa leather, these covers offer a universal fit for most cars, SUVs, and trucks, ensuring that original seat functions like airbags and seatbelts remain fully operational.

2. Safety Information

• Ensure all seat covers are installed correctly and securely to prevent shifting during vehicle operation.
• The seat covers are designed to be airbag compatible. Do not obstruct any airbag deployment areas.
• Verify that seatbelt buckles and other safety features are easily accessible and fully functional after installation.
• If you encounter any difficulties during installation, refer to the provided videos or contact Coverado customer support.

3. Package Contents

Each package includes the following items:

• 2 x Front Seat Covers
• 3 x Rear Seat Covers (velcro-together 3-piece design)
• Detailed Manual (this document)
• Installation accessories (chucks, hooks)

4. Compatibility

These Coverado seat covers are designed for a universal fit, compatible with most cars, trucks, SUVs, and vans. They are crafted using 3D digital scanning for a precise fit that does not hinder original seat functions.

Reference for Compatible Vehicles:

• Acura: Integra
• Audi: A3, A4, A5, A6, A7, A8, Q5, Q7
• BMW: Series 1, 2, 3, 4, 5, 6, 7, 8, Mini Cooper, X1, X3, X4, X5, X6
• Buick: Electra, Regal, Encore, LaCrosse, Enclave, Envision
• Chevrolet: SSR, Cavalier, Malibu, Equinox, Traverse, Caprice, Impala
• Cadillac: CTS, SRX
• Chrysler: 300, Town & Country
• Dodge: Charger, Durango, Journey
• Ford: Fiesta, Focus, Escape, Fusion, Mustang, Edge, Explorer
• Honda: City, Civic, CR-V, Pilot
• Hummer: H2, H3
• Hyundai: Elantra
• Jeep: Cherokee, Compass, Grand Cherokee, Grand Wagoneer
• Kia: Sportage
• Land Rover: Range Rover Evoque, Range Rover
• Lincoln: MKC, MKX, Continental, Navigator
• Mazda: 3
• Mercedes-Benz: A Class, B Class, C Class, G Class, GLC, GLE, E Class, S Class
• Nissan: Sentra, X-Trail, Altima, Maxima, Frontier, Pathfinder
• Porsche: Macan
• Toyota: Corolla, RAV4, Camry, Highlander, 4Runner, Land Cruiser
• Volkswagen: Golf, Tiguan, Passat, CC, Touareg

For precise fitment, measure your seat dimensions before purchase. Refer to the image below for typical measurements.

Figure 1: Seat Cover Dimensions and Compatibility Guide. This image illustrates key measurements for the seat covers and a guide for checking vehicle compatibility.

5. Features

• Breathable Nappa Leather: Constructed from perforated Nappa leather and durable faux leather with high-resilience density foam padding. These covers are breathable and skin-friendly, staying dry and cool.
• Universal Fit: Digitally scanned with 3D equipment for compatibility with most cars, trucks, SUVs, and vans. They cover the seat without hindering original functions like airbags, seatbelts, and massage features.
• Superior Protection: Full-wrap design protects seats from spills, stains, pet hair, and harmful UV rays. They are colorfast, soft to the touch, waterproof, and breathable.
• Enhanced Comfort: Includes head pillows and added lumbar support for improved driving comfort.
• Practical Design: Features button design, back pockets for storage, and fine workmanship for a luxurious look.

Figure 2: Rear view of installed Coverado seat covers, highlighting 360-degree coverage, button design, convenient back pocket, and overall fine workmanship.

Figure 3: Detailed view of the Coverado seat cover, emphasizing the full covered headrest and key material properties: non-slip bottom, wear-resistance, gentle touch, and breathability.

Figure 4: This image demonstrates that the Coverado seat covers do not impede the functionality of cooled or heated car seats, showcasing the breathable perforated leather upper.

6. Setup and Installation

Installation is designed to be straightforward. For best results, it is recommended to have two people for the rear seat installation. Refer to the videos below for visual guidance.

6.1. Front Seat Installation

1. Carefully place the front seat cover over the existing car seat, ensuring it aligns with the seat contours.
2. Locate the chucks and hooks attached to the seat cover. Thread the chucks through the gap between the seat back and seat base.
3. Reach under the seat and connect the hooks and chucks to secure the cover firmly.
4. Adjust the cover to ensure a snug fit and smooth out any wrinkles.

6.2. Headrest Installation

1. Remove the existing headrest from the seat.
2. Slide the Coverado headrest cover over the headrest.
3. Secure any snaps or fasteners on the headrest cover to ensure a tight fit.
4. Reinsert the covered headrest into the seat.

6.3. Rear Seat Installation

1. Position the 3-piece velcro-together rear seat covers over the rear bench.
2. Adjust the middle pieces to accommodate different seat widths, ensuring proper alignment.
3. Secure the covers using the integrated chucks and hooks, ensuring the non-slip bottom is properly seated.
4. Confirm that all seatbelt sockets and any armrest features are fully accessible and functional.

Figure 5: Rear car seats with Coverado covers, illustrating adjustable features for width, compatibility with armrests, and clearly reserved seatbelt sockets for safety and convenience.

7. Operating Instructions

Once installed, your Coverado Car Seat Covers require no special operating procedures. They are designed to integrate seamlessly with your vehicle's existing features:

• Seat Adjustments: The covers do not impede the ability to move seats back and forth or adjust their recline.
• Heated/Cooled Seats: The breathable material allows for effective heat transfer from heated seats and airflow for cooled seats.
• Airbag Compatibility: Designed with specific cutouts or materials to ensure side airbags deploy without obstruction.
• Seatbelts: All seatbelt receptacles remain fully accessible.

8. Maintenance

To maintain the quality and longevity of your Coverado Car Seat Covers:

• Cleaning: Wipe clean with a damp cloth. For tougher stains, use a mild automotive interior cleaner. Avoid harsh chemicals or abrasive materials.
• Spills: Promptly wipe up any spills to prevent staining. The waterproof material helps protect your original seats.
• Regular Care: Periodically check the security of the hooks and chucks to ensure the covers remain snugly in place.

9. Troubleshooting

• Loose Fit: If the covers appear loose, re-check all attachment points (chucks, hooks, velcro) and adjust for a tighter fit. Ensure the covers are properly aligned with the seat contours.
• Difficulty Installing: Refer to the installation videos and ensure you are following the steps for your specific seat type (front/rear). Sometimes, adjusting the seat position (e.g., moving it forward or backward) can provide better access for securing the covers.
• Missing or Damaged Parts: If any part is missing or damaged upon arrival, please contact Coverado customer support for assistance.

10. Specifications

11. Warranty and Support

Coverado is committed to providing high-quality products. If you experience any issues with your seat covers, such as missing parts or damage, please contact Coverado customer support. We will provide replacement parts or offer other suitable solutions.

Manufacturer Contact Information: COVERADO AUTO STORE