BONTEC CT127-v02

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

BONTEC TV Wall Mount Instruction Manual

Model: CT127-v02

Introduction

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your BONTEC TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.

The BONTEC TV Wall Mount is designed to securely hold LED, LCD, and OLED TVs ranging from 13 to 43 inches, with a maximum weight capacity of 20 kg (44 lbs). It offers versatile viewing options with tilt, swivel, and 3600 rotation capabilities.

Safety Information

WARNING:

  • Do not exceed the maximum weight capacity of 20 kg (44 lbs).
  • Ensure the wall structure can safely support the combined weight of the mount and the TV.
  • This mount is designed for installation on solid concrete walls or wood studs. Do not mount on drywall alone.
  • Always use appropriate safety equipment during installation.
  • Follow all installation steps precisely. Improper installation may result in serious injury or damage to property.
  • Keep children and pets away during installation.
Image showing different wall types: wood stud, brick wall, concrete wall, with a warning not to mount on drywall alone.
Figure 1: Applicable Wall Types. The BONTEC TV wall mount is suitable for wood stud, brick, and concrete walls. It is crucial not to mount the unit on drywall without proper stud support.

Package Contents

Before beginning installation, verify that all components are present and undamaged. If any parts are missing or defective, contact BONTEC customer support immediately.

Diagram showing all included hardware: wall anchors, lag bolts, washers, various TV mounting screws (M4, M6, M8), spacers, cushioned nuts, and a wrench.
Figure 2: Fitting Hardware Included. This image illustrates all the screws, anchors, washers, and tools provided for installation, including concrete anchors, lag bolts, and various VESA mounting screws.

Hardware List:

  • Wall Anchors (Concrete) x2
  • Lag Bolts x2
  • Washers (φ6mm) x2
  • M4*12mm Screws
  • M6*16mm Screws
  • M8*20mm Screws
  • D8*5mm Spacers
  • M4/M6/M8 Square Washers
  • M6 Cushioned Nut
  • M6*10mm Screws
  • Wrench
  • Bubble Level
  • Cable Ties x3

Setup and Installation

Before starting, ensure you have the necessary tools: a drill, a screwdriver, a stud finder (if mounting on wood studs), and a pencil.

Step-by-Step Installation:

  1. Step 1: Prepare the Wall Plate. Remove the two pre-installed screws from the wall plate. Mount the wall plate securely to your chosen wall location. For wood studs, use the lag bolts. For concrete or brick walls, use the concrete anchors and lag bolts. Ensure the plate is level using the included bubble level.

    Image illustrating the initial step of removing pre-installed screws and securing the wall plate to the wall.
    Image illustrating the initial step of removing pre-installed screws and securing the wall plate to the wall.

  2. Step 2: Attach Extenders to TV Plate. Attach the extender brackets to the main TV plate. These extenders allow compatibility with various VESA patterns (100x100mm, 100x200mm, 200x100mm, 200x200mm).

    Diagram showing various VESA patterns (100x100mm, 100x200mm, 200x100mm, 200x200mm) and how the mount adapts.
    Figure 3: Available VESA Patterns. This diagram shows the different VESA mounting configurations supported by the mount, indicating the distances between the four mounting holes on the TV back.

  3. Step 3: Mount VESA Plate to TV. Secure the assembled VESA plate to the back of your TV using the appropriate TV mounting screws and spacers. Ensure a snug fit without overtightening.

  4. Step 4: Hang TV onto Wall Bracket. Carefully lift your TV with the attached VESA plate and hook it onto the wall bracket. Ensure it is securely seated.

  5. Step 5: Tighten Security Screws. Tighten the security screws to fix the VESA plate to the wall bracket, preventing accidental dislodgement.

  6. Step 6: Adjust Viewing Angle. Adjust the TV to your desired viewing angle using the tilt, swivel, and rotation features.

    Image showing a TV mounted on the wall with a person adjusting its swivel angle.
    Image demonstrating the swivel capability of the TV mount, allowing for adjustment of the viewing angle.

Operating Instructions

The BONTEC TV Wall Mount offers flexible positioning for optimal viewing.

  • Tilt Adjustment: The mount allows for +50/-100 tilting. Loosen the tilt adjustment knobs, set the desired angle, and re-tighten to secure. This helps reduce glare and optimize vertical viewing.
  • Swivel Adjustment: The articulated arm allows for +/-900 swivel. Gently push or pull the TV to the left or right to achieve the desired horizontal viewing angle. The maximum swivel angle depends on the TV size.
  • Rotation Adjustment: The mount supports 3600 rotation, allowing for landscape or portrait orientation. Carefully rotate the TV to the desired orientation.
  • Extension/Retraction: The mount extends up to 38cm (15 inches) from the wall and retracts to 6.5cm (2.6 inches) to save space. Gently pull or push the TV to adjust the distance from the wall.
Image showing a family watching TV mounted on the wall, with an inset diagram illustrating the +5 to -10 degree tilt adjustment.
Image demonstrating the tilt functionality of the mount, allowing for comfortable viewing by adjusting the vertical angle of the screen.
Image showing the TV mount extended and retracted, with measurements indicating minimum 65mm and maximum 380mm distance from the wall.
Image illustrating the extension and retraction capabilities of the mount, showing its minimum (65mm) and maximum (380mm) distance from the wall.

Maintenance

Regular maintenance ensures the longevity and safe operation of your TV wall mount.

  • Cleaning: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Periodic Checks: Periodically check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments may cause them to loosen.
  • Lubrication: If the swivel or tilt mechanisms become stiff, a small amount of silicone-based lubricant can be applied to the moving joints. Avoid oil-based lubricants that may attract dust.
  • Cable Management: Use the included cable ties to neatly manage cables, preventing strain and entanglement.

Troubleshooting

ProblemPossible CauseSolution
TV is not level after installation.Wall plate not level; TV not properly seated on mount.Re-check wall plate level and adjust if necessary. Ensure TV is fully seated and security screws are tightened.
Mount feels unstable or wobbly.Loose mounting screws; incorrect wall type; overloaded mount.Tighten all wall and TV mounting screws. Verify wall type is suitable. Ensure TV weight does not exceed 20 kg.
Difficulty adjusting tilt/swivel/rotation.Joints are stiff; adjustment knobs/screws are too tight.Loosen adjustment knobs/screws slightly. Apply silicone lubricant to stiff joints if needed.
Missing parts.Packaging error.Contact BONTEC customer support with your purchase details.

Specifications

  • Model: CT127-v02
  • Material: Compressed Steel
  • Color: Black
  • TV Size Compatibility: 13 - 43 inches
  • Weight Capacity: Up to 20 kg (44 lbs)
  • VESA Compatibility: 100x100mm, 100x200mm, 200x100mm, 200x200mm
  • Tilt Angle: +50 to -100
  • Swivel Angle: +/-900 (max angle depends on TV size)
  • Rotation: 3600
  • Wall Distance: 6.5cm (min) to 38cm (max)

Warranty and Support

BONTEC products are manufactured with quality and reliability in mind. For warranty information or technical support, please contact BONTEC customer service through their official website or the retailer where the product was purchased.

Please have your model number (CT127-v02) and purchase date available when contacting support.

For more information, visit the BONTEC Store on Amazon.

© 2023 BONTEC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.