LEFXMOPHY AW007WR AC Adapter Instruction Manual

Product Overview

This manual provides instructions for the LEFXMOPHY AW007WR AC Adapter, designed as a replacement power cord for specific ANMEATE baby monitor models.

Intended Use

This AC adapter is intended for powering and charging ANMEATE baby monitor models SM935E, SM24RX, and SM24TX. It is a direct replacement for the original AW007WR charger.

Image of the LEFXMOPHY AW007WR AC Adapter, showing the wall plug and the barrel connector cord with specifications printed on the adapter.

Setup Instructions

Unpacking

Carefully remove the AC adapter from its packaging. Inspect the cord and adapter for any visible damage.

Connecting the Adapter

Step 1: Identify the Device Port

Locate the power input port on your ANMEATE baby monitor (SM935E, SM24RX, or SM24TX). This adapter features a DC round barrel plug connector.

Image illustrating compatibility with ANMEATE SM24 and SM935E baby monitors, showing the monitor and camera units.

Step 2: Insert the Connector

Gently insert the barrel plug connector of the LEFXMOPHY AW007WR AC Adapter into the power input port of your baby monitor. Ensure a secure fit.

Step 3: Plug into Power Outlet

Plug the AC adapter's wall plug into a standard 100-240V AC electrical outlet. The adapter is UL listed for safety.

Operating Instructions

Powering On

Once connected to a power source and your baby monitor, the monitor should power on automatically or indicate charging. Refer to your baby monitor's specific manual for power-on procedures.

Charging

The adapter provides consistent power for operation and charging of your compatible baby monitor. The cord length is approximately 5 feet (150 centimeters) for convenient placement.

Close-up image of the power cord's internal structure, highlighting the bold pure copper core and indicating a 5-foot charger cord length.

Care and Maintenance

To ensure the longevity and safe operation of your LEFXMOPHY AW007WR AC Adapter, follow these guidelines:

• Storage: Store the adapter in a cool, dry place when not in use. Avoid extreme temperatures.
• Handling: Do not bend or crimp the power cord excessively. Avoid placing heavy objects on the cord.
• Cleaning: Disconnect the adapter from the power outlet before cleaning. Wipe the exterior with a dry, soft cloth. Do not use liquid cleaners.
• Inspection: Periodically inspect the cord and plug for any signs of wear, cuts, or damage. Discontinue use if damage is observed.

Troubleshooting

If you encounter issues with your LEFXMOPHY AW007WR AC Adapter, please refer to the following common solutions:

Adapter Not Supplying Power

• Check Power Outlet: Ensure the wall outlet is functional by testing it with another device.
• Secure Connection: Verify that the barrel plug is fully inserted into the baby monitor's power port and the wall plug is firmly seated in the electrical outlet.
• Inspect Cord: Look for any visible damage to the power cord, such as cuts or frayed wires. If damaged, discontinue use and replace the adapter.
• Compatibility: Confirm that your baby monitor model (SM935E, SM24RX, SM24TX) is listed as compatible with this adapter.

Baby Monitor Not Charging

• Ensure the baby monitor itself is functioning correctly.
• Verify that the adapter is securely connected to both the monitor and the power outlet.
• Allow sufficient time for the monitor's battery to begin charging.

Product Specifications

Warranty Information

Specific warranty details for the LEFXMOPHY AW007WR AC Adapter are not provided in this manual. Please refer to the product packaging or contact LEFXMOPHY customer support for warranty terms and conditions.

Customer Support

For technical assistance, troubleshooting beyond this guide, or inquiries regarding your LEFXMOPHY AW007WR AC Adapter, please contact LEFXMOPHY customer support. Contact information can typically be found on the product packaging or the manufacturer's official website.