Introduction
This manual provides instructions for the Marvel Legends Series Drax 6-inch collectible action figure, inspired by Marvel Studios' Guardians of the Galaxy Vol. 3. Please read this manual carefully to ensure proper handling and enjoyment of your figure.
Safety Information
WARNING: Small parts may be generated. Not for children under 3 years.
What's in the Box
- Drax Action Figure
- Two (2) Knife Accessories
- One (1) Build-A-Figure Part (Cosmo's Leg)
Image: Contents of the Marvel Legends Drax package, including the figure, two knives, and a Build-A-Figure leg.
Setup
- Unboxing: Carefully remove the Drax figure and all accessories from the packaging. Retain packaging for future reference if desired.
- Attaching Knife Accessories: The two knife accessories can be held in the figure's hands. Gently slide the handle of each knife into the figure's grip. The knives can also be stored in the sheaths located on the figure's boots.
- Build-A-Figure Part: The included Build-A-Figure part is Cosmo's leg. Collect other figures in the series to complete the full Cosmo figure.
Image: Drax figure demonstrating the knife storage in his boot sheaths.
Operating (Posing the Figure)
The Drax action figure features multiple points of articulation for dynamic posing and display. Exercise care when adjusting joints to prevent damage.
- Head: The head can rotate and tilt for expressive poses.
- Arms: Shoulders, biceps, elbows (double-jointed), and wrists allow for a wide range of arm movements.
- Torso: Features an abdominal crunch and waist swivel for upper body articulation.
- Legs: Hips, thighs, knees (double-jointed), and ankles provide flexibility for various stances.
Image: Drax figure posed dynamically with his knives, showcasing articulation.
Image: Drax figure in a lunging action pose, demonstrating range of motion.
Maintenance
- Cleaning: To clean the figure, gently wipe with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
- Storage: Store the figure and its accessories in a cool, dry place away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
Troubleshooting
- Stiff Joints: If a joint is stiff, gently apply a small amount of heat (e.g., from a hairdryer on a low setting, held at a safe distance) to the joint area for a few seconds. Then, carefully attempt to move the joint. Do not force stiff joints.
- Loose Joints: For excessively loose joints, a small amount of clear nail polish or a specialized joint-tightening fluid can be applied to the joint and allowed to dry.
- Lost Accessories: Keep all small accessories in a secure location when not in use to prevent loss. Replacement parts are generally not available from the manufacturer.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 2.38 x 5.5 x 10 inches |
| Item Weight | 3.77 ounces |
| Item Model Number | F6603 |
| Manufacturer Recommended Age | 4 years and up |
| Release Date | April 1, 2023 |
| Manufacturer | Hasbro |
Product Overview (360 Degree View)
Observe the Marvel Legends Series Drax figure from all angles to appreciate its detailed sculpt and design.
Video: A 360-degree view of the Marvel Legends Drax action figure, showcasing its design and articulation from all sides.
Additional Images
Image: Front of the product packaging.
Image: Back of the product packaging, highlighting the Build-A-Figure component.
Image: Detailed view of Drax's face sculpt and markings.
Image: Drax figure in a dynamic running pose.
