Transformers Legacy Evolution Deluxe Animated Universe Prowl Action Figure Instruction Manual

1. Introduction

The Transformers Legacy Evolution Deluxe Animated Universe Prowl action figure brings the Cyber-ninja Prowl into your collection. This figure features two distinct modes: robot and motorcycle, and incorporates Evo-Fusion technology for enhanced play. This manual provides essential information for assembly, operation, and care of your figure.

2. Safety Information

WARNING: Small parts may be generated. Not for children under 3 years. This product is recommended for ages 8 years and up.

3. Package Contents

• 1x Animated Universe Prowl Figure
• 2x Wheel Weapon Accessories

Figure packaging, front view. The packaging displays the figure in robot mode and motorcycle mode, along with the Transformers Legacy Evolution logo.

4. Setup and Initial Inspection

Carefully remove the figure and its accessories from the packaging. Inspect all components to ensure they are present and undamaged. No assembly beyond unboxing is typically required for this figure.

5. Operating Instructions: Transformation

The Animated Universe Prowl figure converts between robot mode and motorcycle mode in 20 steps. Refer to the visual guides on the product packaging for detailed step-by-step instructions. Gentle manipulation of joints is recommended during transformation to prevent damage.

5.1. Robot Mode

Prowl in robot mode, showcasing its articulated design and ability to hold accessories.

5.2. Motorcycle Mode

To convert Prowl to motorcycle mode, follow the 20-step transformation sequence. Ensure all panels and parts are securely tabbed into place for a stable vehicle form.

Prowl in motorcycle mode, displaying its sleek vehicle form.

6. Evo-Fusion Technology

The figure includes two wheel accessories that can be converted into shuriken accessories. These can be attached to the figure in both robot and motorcycle modes, enhancing its combat capabilities.

Rear packaging view, illustrating the 20-step transformation and Evo-Fusion accessory conversion.

7. Maintenance

To maintain the condition of your figure:

• Clean with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Store the figure away from direct sunlight and extreme temperatures to prevent material degradation.
• Handle joints gently during transformation to avoid stress marks or breakage.

8. Troubleshooting

If you encounter issues with your figure:

• Stiff Joints: If a joint is too stiff, try gently wiggling it back and forth. Do not force it.
• Parts Not Aligning: Ensure all previous transformation steps are correctly completed. Sometimes a small adjustment can allow parts to tab into place. Refer to the packaging visuals for guidance.
• Loose Parts: If a part feels loose, check if it is meant to be detachable or if it can be re-secured.

9. Specifications

10. Warranty and Support

For warranty information or customer support regarding your Transformers figure, please refer to the contact information provided on the product packaging or visit the official Hasbro website. Keep your proof of purchase for any warranty claims.